Siemens Gigaset S56, Gigaset S58 User Manual
1
Handset at a glance
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / overview.fm / 16.09.2005
Handset at a glance
1 Display (screen) in idle status
2 Battery charge condition
= e V U (flat to full)
= flashes: battery almost flat
e V U flashes: battery charging
3 Display keys (page 9)
4 Message key
Access to calls and lists;
Flashes: new call.
5 End call key, On/Off key
End call, cancel function, go back one menu
level (press briefly), back to idle status
(press and hold), activate/deactivate handset (press and hold in idle status)
6 Hash key
Keypad lock on/off (press and hold)
7 Quick dial list key
Open quick dial list
8 Connection socket for headset
9 Microphone
10 R key
Insert a dial pause (press and hold)
11 Star key
Ringtones on/off (press and hold),
Toggle between upper/lower case and digits
12 IP key
Preconfigered IP number
13 Talk key
Answer a call, open last number redial list
(press briefly), start dialling (press and hold)
14 Handsfree key
Switch between earpiece and handsfree
mode;
Lights up: handsfree activated;
Flashes: incoming call, automatic last
number redial
15 Control key (page 8)
16 Signal strength
Ð i Ñ Ò (high to low)
| flashes: no reception
16 2
3
5
4
6
7
15
14
12
10
11
9
8
1
13
ÐV
INT 1
05.07.19 09:45
}
¨
2
Contents
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / S440_laender_IVZ.fm / 16.09.2005
Contents
Handset at a glance . . . . . . . . . . . 1
Safety precautions . . . . . . . . . . . . 4
Gigaset S58 –
More than just a telephone . . . . . 5
Setting up the telephone
for use . . . . . . . . . . . . . . . . . . . . . . 5
Installing the base station . . . . . . . . . . 5
Range and reception strength . . . . . . . 5
Connecting the base station . . . . . . . . 6
Setting up the handset for use . . . . . . . 6
Activating/deactivating the handset . . 8
Activating/deactivating the
keypad lock . . . . . . . . . . . . . . . . . . . . . . 8
Setting the date and time . . . . . . . . . . 8
Operating the handset . . . . . . . . . 8
Control key . . . . . . . . . . . . . . . . . . . . . . 8
Display keys . . . . . . . . . . . . . . . . . . . . . 9
Return to idle status . . . . . . . . . . . . . . . 9
Menu guidance . . . . . . . . . . . . . . . . . . 9
Correcting incorrect entries . . . . . . . . 10
Notes on the user guide . . . . . . 10
Symbols . . . . . . . . . . . . . . . . . . . . . . . 10
Example: menu input . . . . . . . . . . . . . 10
Example: multiple line input . . . . . . . 11
Making calls . . . . . . . . . . . . . . . . 12
Making an external call . . . . . . . . . . . 12
Ending a call . . . . . . . . . . . . . . . . . . . . 12
Answering a call . . . . . . . . . . . . . . . . . 12
Calling Line Identification . . . . . . . . . 12
Handsfree operation . . . . . . . . . . . . . 13
Muting . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the directory and lists . . . 14
Directory and quick dial list . . . . . . . . 14
Last number redial list . . . . . . . . . . . . 17
Opening caller lists with
the message key . . . . . . . . . . . . . . . . . 17
Chinese Editor . . . . . . . . . . . . . . . . . . 19
Using IP . . . . . . . . . . . . . . . . . . . . . . . . 20
Using several handsets . . . . . . . 21
Registering handsets . . . . . . . . . . . . . . 21
De-registering handsets . . . . . . . . . . . 22
Locating a handset ("Paging") . . . . . . 22
Changing the base station . . . . . . . . . 22
Changing the name of the
base station . . . . . . . . . . . . . . . . . . . . . 22
Making internal calls . . . . . . . . . . . . . . 22
Linking internal participants
to an external call . . . . . . . . . . . . . . . . 23
Changing the name of a handset . . . . 24
Changing a handset's
internal number . . . . . . . . . . . . . . . . . 24
Using a handset as a room monitor . . 25
Handset settings . . . . . . . . . . . . . 27
Shortcuts for functions
and numbers . . . . . . . . . . . . . . . . . . . . 27
Changing the display language . . . . . 27
Setting the display . . . . . . . . . . . . . . . 28
Setting screen picture . . . . . . . . . . . . . 28
Setting night mode . . . . . . . . . . . . . . . 28
Activating/deactivating auto answer . 29
Adjusting the loudspeaker volume . . . 29
Changing ringtones . . . . . . . . . . . . . . 29
Sound Manager . . . . . . . . . . . . . . . . . 30
Activating/deactivating
advisory tones . . . . . . . . . . . . . . . . . . . 31
Setting the alarm clock . . . . . . . . . . . . 31
Setting an appointment . . . . . . . . . . . 31
Displaying missed
appointments, anniversaries . . . . . . . 31
Emergency number . . . . . . . . . . . . . . 33
Restoring the handset default
settings . . . . . . . . . . . . . . . . . . . . . . . . 33
Base station settings . . . . . . . . . 33
Protecting against unauthorised
access . . . . . . . . . . . . . . . . . . . . . . . . . 33
Restoring default settings
to base station . . . . . . . . . . . . . . . . . . 34
3
Contents
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / S440_laender_IVZ.fm / 16.09.2005
Connecting the base station
to the PABX . . . . . . . . . . . . . . . . . 35
Dialling modes and flash time . . . . . . 35
Setting pauses . . . . . . . . . . . . . . . . . . 35
Switching temporarily to
tone dialling (DTMF) . . . . . . . . . . . . . 35
Appendix . . . . . . . . . . . . . . . . . . . 36
Care . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Contact with liquid . . . . . . . . . . . . . . 36
Questions and answers . . . . . . . . . . . 36
Default setting . . . . . . . . . . . . . . . . . . 38
Writing and editing text . . . . . . . . . . . 38
Menu tree . . . . . . . . . . . . . . . . . . 40
Accessories . . . . . . . . . . . . . . . . . 42
Index . . . . . . . . . . . . . . . . . . . . . . 43
4
Safety precautions
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Safety precautions
Caution:
Read the safety precautions and the user guide before use.
Explain their contents to your children, and the potential hazards associated with using the tele-
phone.
Only use the mains adapter supplied.
Fit only the recommended, rechargeable batteries (page 37)! Donot use any
other battery type or non-rechargeable batteries as this could result in significant health risks and personal injury.
Insert rechargeable batteries with the correct polarity and use in accordance
with this user guide (polarity symbols are provided in the handset battery compartments).
The operation of medical appliances may be affected. Be aware of the technical
conditions in your particular environment, e.g. doctor's surgery.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the base station in a bathroom or shower room, as the handset
and base station are not splash-proof (page 36).
Switch off your phone while on board an aircraft. Ensure that it cannot be
switched on again accidentally.
Do not use your phone in environments with a potential explosion hazard,
e.g. auto paint shops.
If you give your Gigaset to someone else, make sure you also give them the user
guide.
Dispose of the batteries and phone in accordance with environmental regulations.
$
‹
Œ
ƒ
5
Gigaset S58 – More than just a telephone
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Gigaset S58 –
More than just a telephone
Your telephone not only enables you to
store up to 200 telephone numbers
(page 14) – your telephone can do a
whole lot more:
u You can programme the keys of your
phone with important numbers or frequently used functions. The number is
then dialled or the function started by
simply pressing a key (page 27).
u You can designate important people as
VIPs so you can tell important calls from
the ring tone (page 15).
u You can store appointments (page 31)
and anniversaries (page 16) in your
phone and it will remind you of them in
advance.
Have fun using your new telephone!
Setting up the telephone
for use
The pack contains:
u one base station Gigaset S58,
u one Gigaset S58 handset,
u one mains adapter,
u one phone cord,
u two batteries,
u one battery cover,
u one belt clip,
u one user manual,
u one warranty card.
Installing the base station
The base station and integrated charger is
designed for operation in enclosed, dry
areas at temperatures ranging from +5 °C
to +45 °C.
Set up the base station at a central point in
the apartment or house.
Please note:
u Never expose the telephone to heat
sources, direct sunlight, other electrical
appliances.
u Protect your Gigaset from moisture,
dust, corrosive liquids and vapours.
Range and reception strength
Range:
u up to 300 m in the open
u up to 50 m in buildings
Reception strength:
The display shows the quality of the radio
contact between the base station and
handset:
u good to poor: ÐiÑÒ
u no reception: | flashes
6
Setting up the telephone for use
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Connecting the base station
¤ First connect the mains unit and then
the phone jack as shown below and
place the cable in the cable channels.
1 Underside of base station (enlarged view)
2 Mains adapter 220 V
3 Phone jack with phone cord
Please note:
u The mains adapter must be always
connected, as the phone will not oper-
ate without mains connection.
u If you buy another phone cable, ensure
that it has the correct phone jack
assignment:
Setting up the handset for use
Inserting batteries
¤ Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
¤ Position the cover pointing slightly
downwards and push it up until it clicks
into position.
Opening the battery cover
¤ Press below the upper curve on the bat-
tery cover and slide down.
Correct phone jack assignment
1unused
2unused
3a
4b
5unused
6unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable batteries recommended by Siemens on
(page 39)! Never use
conventional batteries (non-rechargeable) or
other battery types as this may cause significant damage to health and property. For
example, the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
7
Setting up the telephone for use
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Placing the handset in the base station
and registering it
¤ Place the handset in the base station
with its display facing forward.
The handset registers automatically. Registration takes around 1 minute. During
this process Regstr.Procedure appears in
the display and the name of the base station flashes e.g. Base 1. The handset will
be assigned the lowest unassigned internal number (1–4).
This will appear in the display when registration is complete, e.g. INT 1. This means
that the number 1 has been assigned. If
the internal numbers 1–4 are already
assigned to other units, the number 4 is
overwritten.
To charge the batteries, leave the handset
in the charging cradle.
For questions and problems see page 36..
Initial charging and discharging of
batteries
If the handset is activated, the battery
charging process is indicated on the handset by the flashing battery icon e.
During handset operation, the battery
icon indicates the charge status of the batteries (page 1). The correct charge status
can only be displayed if the batteries are
first fully charged and discharged.
¤ To do this, leave the handset in the
charging cradle uninterrupted for 10
hours. Your handset doesn’t need to be
switched on for charging.
¤ Once the batteries are fully charged,
remove the handset from the cradle
and do not put it back again until the
batteries are fully discharged.
Please note:
u Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and insert
them in again.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a time the charge capacity of the
batteries will decrease for technical reasons.
Your phone is now ready for use.
¤ Set the date and the time (page 8), for
example to ensure the correct time of
incoming calls is recorded.
Attaching the belt clip
There are notches on the side of the handset side at approximately the same height
as the display for attaching the belt clip.
¤ Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip click into the notches.
The belt clip's clasp must be pointing
towards the battery compartment.
Notes:
– Automatic registration is only possible
while no-one is making calls using the base
station.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manually.
– You can change the name of the handset
(page 24).
Notes:
– When the handset is in the base station, it
charges even if it is switched off.
– If the handset has switched itself off
because the batteries are flat and is then
placed in the cradle, it will switch itself on
automatically.
– The handset must only be placed in the
designated base station.
Note:
After the initial charge and discharge you may
replace your handset in the charging cradle
after every call.
8
Operating the handset
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Activating/deactivating the
handset
a Press and hold the end call
key. You hear the confirmation
beep.
Activating/deactivating the
keypad lock
# Press and hold the hash key.
You hear the confirmation beep. The
icon Ø appears in the display when
the keypad lock is activated.
The key lock deactivates automatically if
someone calls you. It re-activates when
the call is finished.
Setting the date and time
¤ If you have not yet set the date and
time, press the display key
§Time§ to open
the input field.
To change the time, open the input field
via:
v
¢ Ð ¢ Date/Time
¤ Change multiple line input:
Date:
Enter year, month and day with 6 digits.
Time:
Enter hours and minutes with 4 digits,
e.g. Q M 1 5 for 7:15
a.m.
§Save§ Press the display key.
Operating the handset
Control key
In this user guide, the side of the control
key that you will have to press in the relevant operating situations is marked black
(up, down, right, left) (e.g. v for "press
right on the control key").
The control key has a number of different
functions:
When the handset is in the idle state
s Open the directory.
v Open main menu.
u Open list of handsets.
t Press briefly: Setting handset
ringtones (page 29).
In the main menu and in input fields
Using the control key you can move the
cursor up t, down s, right v or left
u.
In lists and submenus
t / s Scroll up/down line by line.
v Open submenu or confirm
selection.
u Go back one menu level, or
cancel.
Note
You can call the specified emergency number
(page 33), even when the keypad lock is acti-
vated.
9
Operating the handset
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
During an external call
s Open the directory.
v Open menu.
u Initiate an internal consulta-
tion.
t Adjust loudspeaker volume for
earpiece and handsfree mode.
Display keys
The functions of the display keys change
depending on the particular operating situation. Example:
1 The display keys' current functions are
shown in the bottom display line.
2Display keys
The most important display symbols are:
} Left display key, as long as it
has not been assigned a function (page 27).
¨ Open the main menu or a
context dependent menu.
W Delete key: deletes one char-
acter at a time from right to
left.
Î Go back one menu level or
cancel operation.
Ó Copy number into directory.
Return to idle status
You can revert to idle status from anywhere in the menu by proceeding as follows:
¤ Press and hold the end call key a.
Or:
¤ Press no key: After 2 minutes the dis-
play will return automatically to its idle
status.
Changes which you have not confirmed or
saved by pressing
§OK§, §Yes§, §Save§, §Send§ or
Save Entry
§OK§ will be lost.
An example of the display in the idle status
is shown on page 1.
Menu guidance
Your telephone's functions are accessed in
a menu that has a number of levels.
Main menu (first menu level)
¤ Press v with the handset in idle status
to open the main menu.
The main menu functions are displayed on
the display as coloured icons.
Accessing a function, i.e. opening the corresponding submenu (next menu level):
¤ Navigate to the function using the con-
trol key (q and r). The name of the
function is displayed in the screen's
header row. Press the display key
§OK§.
Submenus
The functions in the submenus are displayed as lists.
Accessing a function:
¤ Scroll to the function with the control
key q and press
§OK§.
Or:
¤ Enter the corresponding digit combina-
tion (page 40).
2
1
}
¨
10
Notes on the user guide
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Pressing briefly on the end call key a
returns you to the previous menu level /
cancels the operation.
Correcting incorrect entries
You can correct incorrect characters in the
text by navigating to the incorrect entry
using the control key. You can then:
u press X to delete the character to the
left of the cursor,
u insert characters to the left of the cur-
sor,
u overwrite the character (flashing)
when entering the time and date, etc.
Notes on the user guide
This section explains the meaning of certain symbols and typographical conventions that are used in this user guide.
Symbols
Copy Entry / Copy List (example)
Select one of the two menu
functions specified.
~ Enter digits or letters.
§Save§ The display keys' current func-
tions are shown reverse highlighted in the bottom display
line. Press the display key
below to launch the function.
q Press the top or the bottom of
the control key: scroll up or
down.
r Press the right or left of the
control key: e.g. select setting.
c / Q / * etc.
Press the matching key on the
handset.
Example: menu input
In this user guide, sequences of symbols
are used to show you which steps you
must carry out. This system is explained
below using the example of "setting the
display's colour scheme". The things you
have to do are explained in the boxes.
v
¢ Ð ¢ Display
¤ With the handset in idle status, press
on the right of the control key to open
the main menu.
¤ Select the icon Ð using the control
key – press the control key right, left,
up or down.
In the display header, H/Set Settings is displayed.
¤ Press §OK§ on the display key to confirm
the function H/Set Settings.
You will see the submenu H/Set Settings.
¤ Press the bottom of the control key
repeatedly until Display is selected.
¤ Press §OK§ on the display key to confirm
the function.
Colour Scheme
Select and press
§OK§.
¤ Press the bottom of the control key
repeatedly until Colour Scheme is
selected.
¤ Press §OK§ on the display key to confirm
the function.
s Select a colour scheme and
press
§OK§ (‰ = current colour).
¤ Press the top or bottom of the control
key to select a colour scheme.
¤ Press §OK§ on the display key to confirm
the function.
The selected colour scheme is
marked with ‰.
11
Notes on the user guide
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / starting.fm / 16.09.2005
Example: multiple line input
There are many situations in which you
can change the settings of a display or
enter data in several lines.
In this user guide, sequences of symbols
are used to show you multiple line input.
This system is explained using the example of "storing appointments". The things
you have to do are explained in the boxes.
You will see the following displayed:
a Press and hold press (idle sta-
tus).
¤ Press and hold the end call key until the
handset returns to idle status.
Appoint.:
Select On or Off.
¤ Press right or left (r) on the control
key to select On or Off.
Date:
Enter month/day in 4-digits format.
¤ Press the s key to move to the next
line.
The second line is marked with [ ] to
show it is active.
¤ Enter the date using the digit keys.
Appoint.: f On g
Date: 07.15
Time: 11:11
Notes: Appoint.
Î §§Save§§
Time:
Enter hours/minutes in 4-digit format.
¤ Press the s key.
The third line is marked with [ ] to show
it is active.
¤ Enter the date using the digit keys.
Notes:
Press the display key
§Edit§. Enter text
(max. of 16 characters) and press
§OK§.
¤ Press the s key.
The fourth line is marked with < > to
show it is active.
¤ Press the display key §Edit§ to open the
input field. Enter the text (page 38).
¤ Press the display key §OK§.
¤ Save changes.
You will see the ¼ icon.
¤ Press the display key §Save§.
¤ Always subsequently press and hold
the a key.
The handset will change to idle status and
display the icon ¼.
12
Making calls
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / telephony.fm / 16.09.2005
Making calls
Making an external call
External calls are calls using the public telephone network.
~c Enter the number and press
the talk key.
Or:
c~ Press and hold the talk key
c and then enter the
number.
You can cancel the dialling operation with
the end call key a.
Ending a call
a Press the end call key.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by displaying on
the screen and by flashing of the handsfree key d.
You can take the call in the following
ways:
¤ Press the talk key c.
¤ Press the display key §Accept§.
¤ Press the handsfree key d.
If the handset is in the base station and
the Auto Answer function is activated
(page 29), the handset will take a call
automatically when you lift it from of the
base station.
If the ringtone is intrusive press the display
key
§Silence§. You can take the call as long as
it remains displayed on the screen.
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met.
u Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification):
number of the caller is transmitted
– CLIP (Calling Line Identification Pres-
entation): number of the caller is
indicated
u You have arranged CLIP with your net-
work provider.
u The caller has arranged CLI with the
network provider.
Notes:
– Dialling using the directory, quick dial list
(page 1, page 14) or last number redial list
(page 9, page 17) saves time re-entering
numbers and network provider prefixes ("IP
numbers").
– You can programme the keys of your phone
with numbers from the directory
(page 27).
13
Making calls
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / telephony.fm / 16.09.2005
Call display with CLIP/CLI
If the number of the caller is stored in your
directory, you will see their name.
1Ring symbol
2 Number or name of caller
The following is displayed in place of the
number:
u External, if no number is transmitted.
u Withheld, if the caller has withheld Call-
ing Line Identification .
u Unavailable, if the caller has not
arranged Calling Line Identification.
Handsfree operation
With handsfree operation, instead of holding the handset to your ear you can put it
down, e.g. on the table in front of you to
allow others to participate in the call.
Activating/deactivating handsfree
Activating while dialling
~d Enter the number and press
the handsfree key.
¤ You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
d Press the handsfree key.
During a call switch the handsfree on or
off.
If you wish to place the handset in the
base station during a call:
¤ Press and hold the handsfree key d
while placing the handset in the base
station. If handsfree key d does not
light up, press the key again.
How to adjust the volume, see page 29.
Muting
You can deactivate the microphone in
your handset during an external call.
The other party hears a wait melody.
u Press the control key on the
left to mute the handset.
” Press the display key to reacti-
vate the microphone.
Å
1234567890
§Accept§ §§§Silence§§
1
2
14
Using the directory and lists
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / directories.fm / 16.09.2005
Using the directory and lists
The options are:
u Directory,
u Quick dial list
u Last number redial list,
u Calls list.
You can store a maximum of 200 entries in
the directory and quick dial list (the actual
number depends on the size of the individual entries).
You can create a personalised directory
and quick dial list for your own individual
handset. You can also send lists/entries to
other handsets (page 15).
Directory and quick dial list
In the directory you store numbers and
matching names.
¤ With the handset in idle status open the
directory by pressing s.
In the quick dial list you can store prefixes
of network providers.
¤ Open the quick dial list using the C
key.
Length of entries
Number: max. 32 digits
Name: max. 16 English characters(8
Chinese characters)
Storing a number in the directory
s ¢ New Entry
¤ Change multiple line input:
Number:
Enter number
Name:
Enter name.
Annivers.:
Enter anniversary if required (page 16).
¤ Save changes.
If your phone is connected to a PABX,
please note page 35.
Storing a number in the quick dial list
C ¢ New Entry
¤ Change multiple line input:
Number:
Enter number.
Name:
Enter name.
¤ Save changes.
Selecting entries in the directory and
quick dial list
s / C Open directory or quick dial
list.
You have the following options:
u Use q to scroll through the entries
until the required name is selected.
u Enter the first characters (max. 10) of
the name, scroll to the entry with s if
required.
Dialling with the directory/
quick dial list
s / C ¢ s (select entry)
c Press the talk key. The number
is dialled.
Notes:
– For quick access to a number from the
directory or the quick dial list, you can
assign the number to a key (page 27).
– How to enter names, see page 19 and page
38.
15
Using the directory and lists
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / directories.fm / 16.09.2005
Managing entries in the directory/
quick dial list
s / C ¢ s (select entry)
Viewing an entry
§View§ Press the display key.
The entry is displayed.
Back with
§OK§.
Editing an entry
§View§ / Edit
Press display keys one after the
other.
¤ Carry out changes and save.
Using other functions
s / C ¢ s (Select entry)
¢ v (open menu)
The following functions can be selected
with q:
Display Number
Edit or enhance a stored number. Then
dial or call up further functions by
pressing ©.
Edit Entry
Edit a selected entry.
Delete Entry
Delete a selected entry.
VIP Entry (directory only)
Mark a directory entry as VIP (Very
Important Person) and assign it a particular ringtone. You will now be able to
tell VIP calls from the ringtone.
Requirement: Calling Line Identification (page 12).
Copy Entry
Send a single entry to a handset
(page 15).
Delete List
Delete all entries in the directory/quick
dial list.
Copy List
Send complete list to a handset
(page 15).
Available Memory
Display the available entries in the
directory and quick dial list (page 14).
Sending the directory/quick dial list to
another handset
Requirements:
u The sending and receiving handsets
must both be registered to the same
base station.
u The other handset and base station can
send and receive directory entries.
s / C
¢ s (Select entry)
¢ v (open menu) ¢ Copy Entry /
Copy List
~ Enter the internal number of
the receiver handset. You see
Copying entry.
§Yes§ / §No§ Press the display key.
A successful transfer is confirmed by a
message and the confirmation tone at the
receiver handset.
Please note:
u Entries with identical numbers are not
overwritten in the receiver handset.
u The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
Loading...