Seaga VC3000 Installation Manual

VC3000

MULTI FUNCTION VENDOR

Operator’s Manual

1

g

INTRODUCTION

Congratulations on the purchase of your VC3000. This VC3000 Multi Function Vendor has been designed to give you many years
of dependable service. It requires little maintenance and is easy to set up and operate.

READ THIS MANUAL COMPLETELY

Your VC3000 vendor is designed to operate simply and reliably, but to take full advantage of your vendor, please read this owner’s
manual thoroughly. It contains important information regarding installation and operations, as well as a brief trouble-shooting guide.

EQUIPMENT INSPECTION

After you have received your vendor and have it out of the box, place it on a secure surface for further inspection. Note: Any
damages that may have occurred during shipping must be reported to the delivery carrier immediately. Reporting damages and the
seeking of restitution is the responsibility of the equipment owner. The factory is willing to assist you in this process in any way
possible. Feel free to contact our Customer Care Department with questions you may have on this process.
Once your have your vendor located, we suggest that you keep this manual for future reference, or you can view this manual online
at www.seagamfg.com
designed to help you quickly identify a problem and correct it.

WHAT IS COVERED:

Manufacturer warrants TO THE ORIGINAL PURCHASER ONLY that each item of equipment manufactured is free from defects in
material and workmanship under normal use and service. Manufacturer’s obligation under warranty shall be limited to repair or
replacement, at our plant, of any parts of the equipment, which shall, within one year of the date of shipment to the original
purchase, be demonstrated to be defective. The original purchaser may obtain repair or replacement of the equipment under
warranty by returning the defective item or entire vendor to the Manufacturer, freight prepaid.

WHAT IS NOT COVERED:

Manufacturer’s warranty obligations DO NOT EXTEND TO OR INCLUDE installation expenses, vandalism, or difficulties resulting
from failure to operate equipment in accordance with Manufacturer’s instructions under competent supervision and difficulties due to
changes in vended products, which are beyond the control of manufacturer.
SPECIAL NOTE: Manufacturer is not responsible for any loss of income due to a vending machine being out of service due to a
warrantable item.

This warranty is in lieu of all the other warranties, expressed or implied, including the warranty of merchantability and fitness or use,
and of all other obligations or liabilities on Manufacturer’s part. Manufacturer neither assumes, nor authorizes any other person to
assume for it, any other liability in connection with the sale of equipment manufactured by itself. This warranty shall not apply to
equipment manufactured or any part thereof which is subject to accident, negligence, alteration, abuse, misuse, or damage in
shipment. The term “original purchaser”, as used in this warranty, shall be deemed to mean that person for whom the equipment is
originally installed.

Manufacturer is not liable for any incidental, consequential or other damages of any kind whatsoever, directly or indirectly, arising
from the use of the equipment whether based upon theories of contract negligence or tort.

For Service and Customer Care:
8:30 a.m. - 4:00 p.m. CST. Mon thru Fri

815.297.9500 ext 160

815.297.1758 Fax
email: [e-mail]

Seaga Manufacturing, Inc.

Freeport, IL 61032 U.S.A.

. Should any problems occur, refer to the section entitled “COMMON QUESTIONS AND ANSWERS”. It is

MANUFACTURER’S WARRANTY

For Service and Customer Care:
9:00 a.m. - 5:30 p.m. Mon thru Fri

[phone]
[phone] Fax
email: [e-mail]

Seaga UK Ltd.

700 Seaga Drive

Unit 8, Caebach, Off Builders Street

Llandudno North Wales LL30 1DR

www.sea

amfg.com

www.seaga.co.uk

2

Table of Contents

SECTION 1 – SPECIFICATIONS

Physical characteristics………………………………………………………………….4
Environment………………………………………………………………………………4
Electrical requirements…………………………………………………………………4

SECTION 2 – INSTALLATION

Location……………………………………………………………………………………5
Lock………………………………………………………………………………………...5

SECTION 3 – OPERATION

Display…………………………………………………………………………………… 6
Service Mode…………………………………………………………………………… 6-17
Delivery System…………………………………………………………………………18
Product Trays……………………………………………………………………………18
Loading Product………………………………………………………………………. 18-19

SECTION 4 – TROUBLE SHOOTING

3

SECTION 1 SPECIFICATIONS

PHYSICAL CHARACTERISTICS

• Height : 72” [ 183 cm]

• Width : 35” [ 85 m ]

• Depth : 35.5” [ 91 cm ]

• Weight : 520 lbs [236 Kg]

• Finish : Powder Coat paint

• Number of Trays : 6

• Maximum Selection : 32 standard

• Maximum Capacity : 344 standard

ENVIRONMENT

• Location Environment: Indoors only

Electrical Requirement

The VC3000 requires one (1) 120 VAC 12 Amps grounded outlet and the VC3000F requires 220 VAC.

Fig. 1
Exterior View

LED Display

Display Window

Key Pad

Front Door

Lock

Product Door

Bill Validator

Coin Slot

Coin Return
Button

Coin Return
Door

4

Figure 2

Interior View

Light

Display Board

Control Board
and Red
Service Mode
Button

Red Main
Power Switch

Door Wire
Harness

SECTION 2 INSTALLATION

LOCATION

Upon Receipt of the unit, inspect for any shipping damage and report directly to the carrier. When relocating the unit, it
should not be tipped

LOCK

Your VC3000 vendor has one Lock, more commonly known as T-handle lock. To unlock the Front Panel, insert key
and turn clockwise ¼ turn. When unlocked the ‘T’ of the Lock will pop out from its base. Turn the ‘T’ 15 to 20 times
counter clock wise to unlock the door. To Lock the door turn the ‘T’ handle clockwise 15 to 20 times and then push the
‘T’ inside the Lock to lock the door. Key can now be removed.

5

SECTION 3 OPERATION

DISPLAY

The VFD Display (Figure 3) is a 2 x 20 Text Display. The display shows the customer the amount of money entered
into the vendor and the cost of their selection. It shows the operator the Service Mode functions for setting the various
functions of the vendor.

Figure 3

SERVICE MODE

A 1 2

B 3 4

C 5 6

D 7 8

9 = EXIT
10 = ENTER

↑ = Scroll UP
↓ = Scroll Down

E 9

F 10

G

Sales mode keypad Four Service mode Button of keypad

↑ ↓

EXIT

ENTER

↑ ↓

6