TV3000
TRIPLE VEND
Operator’s Manual
Seaga Manufacturing, Inc.
700 Seaga Drive
Freeport, IL USA 61032
www.seagamfg.com
INTRODUCTION
Congratulations on the purchase of your new Triple Vend. This Triple Vend has been designed to give you many years of dependable service. It requires little maintenance and is easy to set up and operate.
READ THIS MANUAL COMPLETELY
Your Triple Vend is designed to operate simply and reliably, but to take full advantage of the vendor, please read this owner's manual thoroughly. It contains important information regarding installation and operations, as well as a brief troubleshooting guide.
EQUIPMENT INSPECTION
After you have received your Triple Vend and have it out of the box, place it on a secure surface for further inspection. Note: Any damages that may have occurred during shipping must be reported to the delivery carrier immediately. Reporting damages and the seeking of restitution is the responsibility of the equipment owner. The factory is willing to assist you in this process in any way possible. Feel free to contact our Customer Care department with any questions you may have on this process.
Once you have your vendor located, we suggest that you keep this manual for future reference, or you can view this manual online at www.seagamfg.com. Should any problems occur, refer to the section entitled “COMMON QUESTIONS AND ANSWERS”. It is designed to help you quickly identify a problem and get it remedied.
MANUFACTURER'S WARRANTY
WHAT IS COVERED:
Manufacturer warrants TO THE ORIGINAL PURCHASER ONLY that each item of equipment manufactured is free from defects in material and workmanship under normal use and service. Manufacturer's obligation under this warranty shall be limited to repair or replacement, at our plant, of any parts of the equipment which shall, within one year of the date of shipment to the original purchaser, be demonstrated to be defective. The original purchaser may obtain repair or replacement of the equipment under this warranty by returning the defective item or entire vendor to the Manufacturer, freight prepaid.
WHAT IS NOT COVERED:
Manufacturer's warranty obligations DO NOT EXTEND TO OR INCLUDE installation expenses, vandalism, or difficulties resulting from failure to operate equipment in accordance with Manufacturer's instructions under competent supervision and difficulties due to changes in vended products which are beyond the control of Manufacturer.
SPECIAL NOTE: Manufacturer is not responsible for any loss of income due to a vending machine being out of service due to a warrantable item.
This warranty is in lieu of all other warranties, expressed or implied, including the warranty of merchantability and fitness or use, and of all other obligations or liabilities on Manufacturer's part. Manufacturer neither assumes, nor authorizes any other person to assume for it, any other liability in connection with the sale of equipment manufactured by itself. This warranty shall not apply to equipment manufactured or any part thereof which is subject to accident, negligence, alteration, abuse, misuse or damage in shipment. The term "original purchaser," as used in this warranty, shall be deemed to mean that person for whom the equipment is originally installed.
Manufacturer is not liable for any incidental, consequential or other damages of any kind whatsoever, directly or indirectly, arising from the use of the equipment whether based upon theories of contract negligence or tort.
Effective 9/01
For Technical Support & Service |
For Parts |
Contact our Customer Care Dept. |
Contact our Parts Dept. |
8:30 a.m. - 4:00 p.m. CST. Mon thru Fri |
8:30 a.m. - 4:00 p.m. CST. Mon thru Fri |
815.297.9500 ext 160 |
815.297.9500 ext 160 |
815.297.1758 Fax |
815.297.1758 Fax |
email: customercare@seagamfg.com |
email: parts@seagamfg.com |
S e a g a M a n u f a c t u r i n g , I n c .
700 Seaga Drive
Freeport, IL 61032 U.S.A. Online: www.seagamfg.com
The Triple Vend
TV3000
Top Lid
Product Window
Coin Mechanism
Product Chute Door
Spill Tray
Pedestal Tube
Base
(Rear view with Rear Door open)
Rear |
Clean Out Chutes |
Door |
Product Chutes
Coin Trays
Threaded Flange