Seaga SM10 Installation Manual

Operator’s Manual

Seaga Manufacturing, Inc.

700 Seaga Drive

Freeport, IL USA 61032

www.seagamfg.com

SM10

Cold Beverage Merchandiser

INTRODUCTION

Congratulations on the purchase of your new Cold Beverage Merchandiser. The SM10 has been designed to give you
many years of dependable service. It requires little maintenance and is easy to set up and operate.

READ THIS MANUAL

COMPLETELY

Your SM10 is designed to operate simply and reliably, but to take full advantage of your vendor, please read this owner's
manual thoroughly. It contains important information regarding installation and operations, as well as a brief troubleshoot­ing guide.

EQUIPMENT INSPECTION

After you have received your SM10 and have it out of the box, place it on a secure surface for further inspection. Note:
Any damages that may have occurred during shipping must be reported to the delivery carrier immediately. Reporting dam­ages and the seeking of restitution is the responsibility of the equipment owner. The factory is willing to assist you in this
process in any way possible. Feel free to contact our Customer Care Department with any questions you may have on this
process.
Once you have your vendor located, we suggest that you keep this manual for future reference, or you can view this man­ual online at www

.seagamfg.com. Should any problems occur, refer to the section entitled “COMMON QUESTIONS AND

ANSWERS”. It is designed to help you quickly identify a problem and correct it.

MANUFACTURER'S WARRANTY

WHAT IS COVERED: Manufacturer warrants TO THE ORIGINAL PURCHASER ONLY that each item of equipment

manufactured is free from defects in material and workmanship under normal use and service. Manufacturer's obligation
under this warranty shall be limited to repair or replacement, at our plant, of any parts of the equipment which shall, with­in one year of the date of shipment to the original purchaser, be demonstrated to be defective. The original purchaser
may obtain repair or replacement of the equipment under this warranty by returning the defective item or entire vendor to
the Manufacturer, freight prepaid.

WHAT IS NOT COVERED: Manufacturer's warranty obligations DO NOT EXTEND TO OR INCLUDE installation
expenses, vandalism, or difficulties resulting from failure to operate equipment in accordance with Manufacturer's
instructions under competent supervision and difficulties due to changes in vended products which are beyond the con­trol of Manufacturer.

SPECIAL NOTE: Manufacturer is not responsible for any loss of income due to a vending machine being out of service
due to a warrantable item.

This warranty is in lieu of all other warranties, expressed or implied, including the warranty of merchantability and fitness
or use, and of all other obligations or liabilities on Manufacturer's part. Manufacturer neither assumes, nor authorizes any
other person to assume for it, any other liability in connection with the sale of equipment manufactured by itself. This war­ranty shall not apply to equipment manufactured or any part thereof which is subject to accident, negligence, alteration,
abuse, misuse or damage in shipment. The term "original purchaser," as used in this warranty, shall be deemed to mean
that person for whom the equipment is originally installed.

Manufacturer is not liable for any incidental, consequential or other damages of any kind whatsoever, directly or indirectly,
arising from the use of the equipment whether based upon theories of contract negligence or tort.

Effective 7/02

Seaga Manufacturing, Inc.

700 Seaga Drive

Freeport, IL 61032 U.S.A.

Online: www.seagamfg.com

For Technical Support & Service

Contact our Customer Care Dept.

8:30 a.m. - 4:00 p.m. CST. Mon thru Fri

815.297.9500 ext 160

815.297.1758 Fax

email: [e-mail]

For Part

s

Contact our Parts Dept.

8:30 a.m. - 4:00 p.m. CST. Mon thru Fri

815.297.9500 ext 160

815.297.1758 Fax

email: [e-mail]