Seaga CM3050 Installation Manual

$300 Capacity Change Maker

Operator’s Manual

Seaga Manufacturing, Inc

700 Seaga Drive

Freeport, IL USA 61032

www.seagamfg.com

1

INTRODUCTION

g

Congratulations on the purchase of your new ChangeMaker. This ChangeMaker has been designed to give you many years of
dependable service. It requires little maintenance and is easy to set up and operate.

READ THIS MANUAL COMPLETELY

Your ChangeMaker is designed to operate simply and reliably, but to take full advantage of your vendor, please read this owner’s
manual thoroughly. It contains important information regarding installation and operations, as well as a brief trouble-shooting guide.

EQUIPMENT INSPECTION

After you have received your machine and have it out of the box, place it on a secure surface for further inspection. Note: Any damages
that may have occurred during shipping must be reported to the delivery carrier immediately. Reporting damages and the seeking of
restitution is the responsibility of the equipment owner. The factory is willing to assist you in this process in any way possible. Feel free
to contact our Customer Care Department with questions you may have on this process.
Once your have your vendor located, we suggest that you keep this manual for future reference, or you can view this manual online at
www.seagamfg.com
to help you quickly identify a problem and correct it.

. Should any problems occur, refer to the section entitled “ COMMON QUESTIONS AND ANSWERS”. It is designed

MANUFACTURER’S WARRANTY

WHAT IS COVERED:

Manufacturer warrants TO THE ORIGINAL PURCHASER ONLY that each item of equipment manufactured is free from defects in
material and workmanship under normal use and service. Manufacturer’s obligation under warranty shall be limited to repair or
replacement, at our plant, of any parts of the equipment, which shall, within one year of the date of shipment to the original purchase,
be demonstrated to be defective. The original purchaser may obtain repair or replacement of the equipment under warranty by returning
the defective item or entire vendor to the Manufacturer, freight prepaid.

WHAT IS NOT COVERED:

Manufacturer’s warranty obligations DO NOT EXTEND TO OR INCLUDE installation expenses, vandalism, or difficulties resulting from
failure to operate equipment in accordance with Manufacturer’s instructions under competent supervision and difficulties due to
changes in vended products, which are beyond the control of manufacturer.
SPECIAL NOTE: Manufacturer is not responsible for any loss of income due to a vending machine being out of service due to a
warrantable item.

This warranty is in lieu of all the other warranties, expressed or implied, including the warranty of merchantability and fitness or use, and
of all other obligations or liabilities on Manufacturer’s part. Manufacturer neither assumes, nor authorizes any other person to assume
for it, any other liability in connection with the sale of equipment manufactured by itself. This warranty shall not apply to equipment
manufactured or any part thereof which is subject to accident, negligence, alteration, abuse, misuse, or damage in shipment. The term
“original purchaser”, as used in this warranty, shall be deemed to mean that person for whom the equipment is originally installed.

Manufacturer is not liable for any incidental, consequential or other damages of any kind whatsoever, directly or indirectly, arising from
the use of the equipment whether based upon theories of contract negligence or tort.

For Service and Customer Care:
8:30 a.m. - 4:00 p.m. CST. Mon thru Fri

815.297.9500 ext 160

815.297.1758 Fax
email: [e-mail]

Seaga Manufacturing, Inc.

700 Seaga Drive

Freeport, IL 61032 U.S.A.

www.seagamfg.com

Unit 8, Caebach, Off Builders Street

Llandudno North Wales LL30 1DR

2

For Service and Customer Care:
9:00 a.m. - 5:30 p.m. Mon thru Fri

[phone]
[phone] Fax
email: [e-mail]

Seaga UK Ltd.

www.sea

a.co.uk

LCD Display

Bill Validator

Front Door

Change
Catcher

Locks

Case

Interior View

Bill Validator

Coin Hopper

Coin Hopper
Assembly

LCD

Bill Tray

Door Holding
Chain

3