Schwinn 431 Elliptical Assembly Manual
Do not print this page
©2007. Nautilus, Inc. All Rights Reserved. Schwinn is a registered trademark. Nautilus, Inc., World Headquarters, 16400 SE Nautilus Dr., Vancouver, WA 98683
ELLIPTICAL
ASSEMBLY GUIDE
ASSEMBLY GUIDE
001-7077-072809C
1
CONTENTS
Table of Contents
Hardware ................................................................................................2
Exploded View .......................................................................................4
Parts List .................................................................................................5
Assembly Instructions ..........................................................................6
Important Contact Numbers ...............................................................19
ATTENTION!
When unpacking the box, please inspect all styrofoam and
packaging before discarding.
Some parts are packaged on the outside of the
styrofoam packaging.
HARDWARE
2
Note: Please verify you have all correct parts and quantities before
assembling unit.
If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270.
M8 x 15L
BUTTON HEAD (32)
M8 x 20L
BUTTON HEAD (4)
M8 x 20L HEX HEAD
THREAD LOCK (4)
M8 WASHER
WIDE (4)
M5 x 10L
PHILLIPS HEAD (4)
M8 WASHER
REGULAR (36)
M8 x 25L FLAT HEAD
THREAD LOCK (6)
COTTER PIN (2)
END CAPS (2)
STAPLED TO THE HARDWARE CARD
M8 WAVE
WASHER (2)
3
HARDWARE
Note: Please verify you have all correct parts and quantities before
assembling unit.
If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270.
M8 WASHER
LOCKING (40)
M8 x 25L FLAT HEAD
THREAD LOCK (6)
ALLEN WRENCH (1)
COTTER PIN (2)
END CAPS (2)
WRENCHES (2)
STAPLED TO THE HARDWARE CARD
EXPLODED VIEW
4
ITEM
DESCRIPTION
A
Schwinn 431 Hardware Cards
B
SWN 431 ASSEMBLY MANUAL
C
Main Frame Assembly
D
Console Handle Assembly
E
Cup holder
F
Pivot shoulder cover
G
Movement arm wire cover
H
Console mast cover
I
Console Mast Assembly
J
Left Foot Assembly
K
Right Foot Assembly
L
Upper Right Handlebar Assembly
M
Upper Left Handlebar Assembly
N
Lower Left Handlebar Assembly
O
Lower Right Handlebar Assembly
P
Front Stabilizer Assembly
Q
Rear Stabilizer Assembly
R
Right Leg Assembly
S
Left Leg Assembly
T
130/230/430 Console Assembly
U
AC Adaptor, 9V - 500ma
V
Extrusion Assembly
W
Foot Mount Plate
X
Arm Pivot Rod
Y
45 mm Round Cover
Z
Extrusion Handlebar Assembly
Z
Q
P
J
A
B
U
S
W
W
Y
F
G
N
V
M
E
T
D
H
I
X
O
F
G
L
K
Y
R
C
EXPLODED VIEW
Loading...