Schwinn 270,Journey 2.5 Assembly Manual / Owner's Manual

Manual en Espa_ol LaSno Ar_ericano_ http://www_schwinn_itness_cor_ ASSEMBLY _ANUAL /OWNEFI_S I_/IANUAI-
Important Safety Instructions -Assembly 3
Safety Warning Labels / Serial Number 4 Specifications 5 Before Assembly 5
Parts 6 Hardware 7 Tools 7
Assembly 8 Moving the Machine 18 Leveling the Machine 19
Important Safety Instructions 20 Features 21
Console Features 22
Adjustments Power Up / Idle Mode Quick Start Program
User Profiles Pausing or Stopping
Results / Cool Down Mode
GOAL TRACK Statistics Console Service Mode Maintenance
Maintenance Parts
Troubleshooting Warranty Sears Customer Warranty
27 27 27 28 28 33 34 34 36 37 38 40 42 43
To validate warranty support, keep the original proof of purchase and record the following information: Serial Number
Date of Purchase To register your product warranty, go to: vcw_.SchwinnFitness.com/register
Or call 1 (800) 605-3369. if you have questions or problems with your product, please call 1 (800) NAUTILUS (628-8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.Nautituslnc.com - Customer Service: North America (800) 605-3369, csnts@nautitus.com I outside U.S. +01-360-859-5180, technics@nautitus.com I Printed in China 2013 Nautilus, Inc.
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
A
Obeythe following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
o
Keep bystanders and children away from the product you are assembling at all times.
o
Do not connect power supply to the machine until instructed to do so.
o
Do not assemble this machine outdoors or in a wet or moist location.
o
Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
o
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
o
Set up this machine on a solid, level, horizontal surface.
o
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
If replacement parts are necessary, use only genuine Nautilus@ replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.
Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.
o
Do all assembly steps inthe sequence given. Incorrect assembly can lead to injury or incorrect function.
o
This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at aclose range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult the "Safety Warning Labels and Serial Number" section to determine the location of the magnets on this product.
SerialNumber
\
Manufacture Date: YY/MM
P-65 _.STM TPCH
compliant ;ompliant compliant
CEC..40(
compliant
SCHWINN _ Nautilus, Inc, =
18225 NE RiverSide Parkway, Poland, Or. 97230 www.nautilus.com Phone:I-800-NAUTILUS Brand: SCHWINN Modeh 270,Journey 2,5, Echelon 2,5 Electrical Rating: 9V DC,1.5A Accuracy Class: n/a Usage Class: H / Consumer use only.
Maximum User Weight: 3001b (136kg) _"*'_1-_7 Equipment Type: Fitness
Made in: China
Patent: www.nautilusinc.com/IP 8002048_B
L-_
Read, understand and obeyall warnings on this machine.
Keep children away.
Not intended for use by anyone under 14 years of age.
Prior to use, read and understand the Owner's Manual.
Injury or death is possible if Caution is not used while using this
machine.
The maximum user weight for this machine is 300 Ibs (136 kg).
Replace any "Caution" "Warning" or "Danger" label that is illegible, damaged, or removed.
The heart rate displayed may be inaccurate and should be used for
reference only.
/
FCCCompliance
A Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
300 Ibs. (136 kg)
_._ MaximumUserWeight:
49.9" PowerRequirements:
(126.8 cm) Operational Voltage:
>_64" RegulatoryApprovals:
(162.5 cm) AC Power Adapter:
_" (70.3 cm)
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.
Operating Current:
Operational Voltage 9VDC
1500 mA
UL listed, CECcertified (or equivalent), Rated 120V 60Hz Input, 9VDC, 1500mA Output.
Class 2.
BeforeAssembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74.6" x 110.5" (189.5 cm x 280.5 cm).
BasicAssemblyTips Follow these basic points when you assemble your machine:
Read and understand the "Important Safety Instructions" before assembly.
Collect all the pieces necessary for each assembly step. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
The assembly can require 2 people.
17
16
15
14
13
/
,,'/ /
,i/ !
ii
12
ii
Item lily Description Item lily Description
1 1 Console 10 1 AC Adapter
2 1 Water Bottle Holder 11 1 Left Pedal 3 1 Seat Back 12 1 Front Stabilizer
4 1 Seat Cover 13 1 Right Pedal 5 1 Seat Frame Assembly 14 1 Upper Shroud 6 1 Seat Bottom 15 1 Shroud Cap
7 1 Seat Adjustment Handle 16 1 Console Mast 8 1 Rear Stabilizer 17 1 MP3 Cord
9 1 Frame
,J,,{¢>_
Item Qty Description
A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12
C 4 Flat Washer, M8 D 8 Lock Washer, M8
E 10 Flat Washer, M6
Tools
Included NotIncluded
Item Qty Description
F 2 Phillips Head Screw,
G 14 Lock Washer, M6
H 4 Curved Washer, M6
I 4 Phillips Head Screw,
J 4 Curved Washer, M8
(recommended)
M5xl 2
M6x25
6 mm 4mm
1. AttachStabilizersto Frame
Note: Hardware is pre-installed and not on the Hardware Card. *
I
/
/
/
2. Attachthe SeatFrameAssemblyto the SeatRail
NOTICE: Do not crimp the Heart Rate ©able. Once all hardware has been inserted, be sure to fully tighten it.
X2
5
3. AttachSeatPadsto SeatFrameAssembly
3
X8
i
I
4. Attach Coverto Frame Assembly
4
/ / /
/
/
!
5. AttachSeatAdjustmentHandleto FrameAssembly
6. Connectthe CablesandAttachthe ConsoleMastto FrameAssembly
NOTICE: Do not crimp Console Cables.
16
14
X4
//
/ //
7. RemoveHardwarefromConsole
NOTICE: Do not crimp the cable. Note: Hardware is pre-installed and not on the Hardware Card. *
8. ConnectCablesand Attach Console to FrameAssembly
NOTICE:Align the clips on the cable connectors and make sure the connectors lock. Do not crimp cables.
1
#2
//ii/
Loading...
+ 30 hidden pages