Schneider Electric AX-MR16IN Specification Sheet
AX-MR16IN
Serial I/O Controller
Authentic Mercury MR serial Input/output (SIO)
devices represent the secondary level in Mercury’s
distributed architecture. The devices oer
exibility to our customers s, ensuring they can
choose the controller that best ts their needs.
Product at a glance
Features
• 16 programmable inputs;
2 programmable relay outputs
• 2-wire RS-485 communication
• AES 128 bit data encryption
• Universal I/O device characterization
• Configurable input parameters
• Universal system compatibility with
Authentic Mercury intelligent controllers
Benefits
• Initiates commands by operator, by time
schedules, or by events
• Allows for easy and compact clustering
of up to 16 uniquely monitored devices
• Allows standard and range based
supervision with end-of-line resistance
The multi-device AX-MR16IN interface panel is dedicated
to point control and monitoring and enables OEMs to
support 16 general-purpose input circuits. The circuits can
be individually set for sensitivity ranges, timing parameters
(normally-open or normally-closed operations) and
end-of- line resistance values. They can also be declared
supervised and non-supervised. Two programmable
relay outputs are configurable for fail-safe or fail secure
operation, supporting “On”, “Off”, “Pulse”, and “Repeating
Pulse” commands.
With these powerful control-point capacities onboard, the
AX-MR16IN can control outboard devices; it can also be
activated by the condition of selected system devices,
either locally or regionally, without host intervention.
The AX-MR16IN is an ideal choice for an interface panel that
provides OEMs the ability to monitor high concentrations of
inputs combined with low requirements for output control.
Application Notes
The AX-MR16IN is an essential component that supports
Mercury’s flexible, building-block approach to access
control system design. The AX-MR16IN provides the
capacity to link, control and respond to an array of
sensors. With its RS-485 connectivity, the AX-MR16IN can
be clustered or distributed to best suit each installation
environment.
AX-MR16IN
Serial I/O Controller
Electrical
Primary Power 12-24 VDC +/- 10%,
350 mA maximum
12Vdc @ 300mA nominal
24Vdc @ 220mA nominal
Communication RS–485, 2-wire, 4,000’
(twisted pair with shield, Belden 9841)
Inputs 16 General purpose: programmable
circuit type
2 Dedicated: Tamper and Power Monitor
Outputs 2 Relays: Form–C, 5 Amp 28 VDC
AccessXpert
Integration to Share
Enabled mobile applications
Fully web accessible
Powerful integrations
for Coordinated Control
Dimensions 6.0’ W x 8.0’ L x 1.0’ H,
(152mm W x 203mm L x 25mm H)
Temperature 32 – 158°F operational,
-67 – 185°F storage
Humidity 0 to 95% RHNC
Standards UL 294 Recognized
CE Compliant
RoHS
StruxureWare
Building Operation
Integration to Share Information
Integrated building management
Optimize building performance
Beyond Open
TM
IP Reader
© 2016 Schneider Electric. All rights reserved.
Mercury Dual
Door Controller
Mercury I/O
Security System
Controller SSC
Controller
PoE Edge Controller
Communicates with SSC
Loading...