Multimedia Projector
MODEL PLC-XP46
PLC-XP46L (Lensless)
Owner’s Manual
TO THE OWNER
Before operating this projector, read this manual thoroughly and operate the projector properly.
This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Trouble-shooting” section of the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.
SAFETY PRECAUTIONS
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
●This projector produces intense light from the projection lens. Do not stare directly into the lens as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.
●This projector should be set in the way indicated. If not, it may result in a fire hazard.
● Take appropriate space on the top, sides and rear of the projector |
|
SIDE and TOP |
|
REAR |
|
|||||
cabinet for allowing air circulation and cooling the projector. 20cm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Minimum distance should be taken. If the projector is to be built |
|
|
|
|
|
|
|
|
|
|
into a compartment or similarly enclosed, the minimum distances |
|
|
|
|
|
|
|
|
||
must be maintained. Do not cover the ventilation slot on the |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|||
projector. Heat build-up can reduce the service life of your |
|
50cm |
|
50cm |
|
|
50cm |
|
||
|
|
|
|
|
||||||
projector, and can also be dangerous. |
|
|
|
|
|
|
|
|
||
●Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.
●Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.
●If the projector is not to be used for an extended time, unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
2
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power cord or plug is damaged or frayed.
b.If liquid has been spilled into the projector.
c.If the projector has been exposed to rain or water.
d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.
e.If the projector has been dropped or the cabinet has been damaged.
f.When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
Voor de klanten in Nederland
Bij dit product zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.
3
COMPLIANCES
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number |
: PLC-XP46/PLC-XP46L |
Trade Name |
: Sanyo |
Responsible party |
: SANYO FISHER COMPANY |
Address |
: 21605 Plummer Street, Chatsworth, California 91311 |
Telephone No. |
: (818)998-7322 |
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be
unable to insert the plug into the outlet, contact your electrician. |
GROUND |
|
AC Power Cord for the United Kingdom :
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.
The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ············Earth
Blue ·································Neutral Brown ······························Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol 
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING : THIS APPARATUS MUST BE EARTHED.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
4
TABLE OF CONTENTS
FEATURES AND DESIGN |
6 |
PREPARATION |
7 |
NAME OF EACH PART OF PROJECTOR |
7 |
SETTING-UP PROJECTOR |
8 |
CONNECTING AC POWER CORD |
8 |
POSITIONING PROJECTOR |
9 |
LENS INSTALLATION |
9 |
ADJUSTABLE FEET |
10 |
MOVING PROJECTOR |
10 |
CONNECTING PROJECTOR |
11 |
TERMINALS OF PROJECTOR |
11 |
CONNECTING TO COMPUTER |
12 |
CONNECTING TO VIDEO EQUIPMENT |
13 |
COMPUTER MODE |
22 |
SELECTING INPUT SOURCE |
22 |
SELECTING COMPUTER SYSTEM |
22 |
PC ADJUSTMENT |
23 |
AUTO PC ADJUSTMENT |
23 |
MANUAL PC ADJUSTMENT |
24 |
COMPATIBLE COMPUTER SPECIFICATIONS |
26 |
PICTURE IMAGE ADJUSTMENT |
27 |
IMAGE LEVEL SELECT |
27 |
IMAGE LEVEL ADJUSTMENT |
28 |
PICTURE SCREEN ADJUSTMENT |
29 |
VIDEO MODE |
30 |
SELECTING INPUT SOURCE |
30 |
SELECTING VIDEO SYSTEM |
31 |
PICTURE IMAGE ADJUSTMENT |
32 |
IMAGE LEVEL SELECT |
32 |
IMAGE LEVEL ADJUSTMENT |
33 |
BEFORE OPERATION |
14 |
PICTURE SCREEN ADJUSTMENT |
34 |
|
|
||
OPERATION OF REMOTE CONTROL |
14 |
SETTING |
35 |
|
|
||
LASER POINTER FUNCTION |
14 |
SETTING MENU |
35 |
REMOTE CONTROL BATTERIES INSTALLATION |
15 |
||
TOP CONTROLS AND INDICATORS |
16 |
|
|
OPERATING ON-SCREEN MENU |
17 |
APPENDIX |
37 |
HOW TO OPERATE ON-SCREEN MENU |
17 |
||
FLOW OF ON-SCREEN MENU OPERATION |
17 |
|
|
MENU BAR |
18 |
OPERATING WIRELESS MOUSE |
37 |
|
|
||
BASIC OPERATION |
19 |
|
|
TURNING ON / OFF PROJECTOR |
19 |
LAMP REPLACEMENT |
39 |
ADJUSTING SCREEN |
20 |
LAMP REPLACE COUNTER |
39 |
ZOOM ADJUSTMENT |
20 |
TROUBLESHOOTING |
40 |
FOCUS ADJUSTMENT |
20 |
TECHNICAL SPECIFICATIONS |
42 |
LENS SHIFT ADJUSTMENT |
20 |
|
|
KEYSTONE ADJUSTMENT |
20 |
|
|
PICTURE FREEZE FUNCTION |
21 |
|
|
NO SHOW FUNCTION |
21 |
|
|
P-TIMER FUNCTION |
21 |
|
|
SOUND ADJUSTMENT |
21 |
|
|
TRADEMARKS
●Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
●IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
●Windows and PowerPoint are registered trademarks of Microsoft Corporation.
●Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective corporation.
5
FEATURES AND DESIGN
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
Compact Design |
|
Digital Zoom (for Computer) |
This projector is extremely compact in size and weight. It is designed to carry and work anywhere you wish to use.
Compatibility
This projector widely accepts various video and computer input signals including;
●Computers
IBM-compatible or Macintosh computer up to 1280 x 1024 resolution.
●6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL- N color system can be connected.
●Component Video
Component video signal, such as a DVD player output high definition TV signals including 480i, 480p, 575i, 575p, 720p, 1035i or 1080i, can be connected.
●S-Video
S-Video signal, such as a S-VHS VCR output signal, can be connected.
High Resolution Image
This projector provides 1024 x 768 dots resolution for computer input and 800 horizontal TV lines. Resolution from a computer between XGA (1024 x 768) and SXGA (1280 x 1024) is compressed into 1024 x 768 dots. This projector cannot display image of over 1280 x 1024 dots. When resolution of your computer is over than 1280 x 1024, reset a computer output for lower resolution.
Multi-Scan System
This projector has Multi-Scan System to conform to almost all computer output signals quickly. There is no need for troublesome manual adjustment of frequency and other settings.
One-Touch Auto PC Adjustment
Incoming computer video signals are recognized and best adjustment is automatically set by Auto PC Adjustment. No complicated setup is necessary and projection is always precise.
Motor-driven Lens Shift
Projection lens can be moved up and down with motordriven lens shift function. This function makes it easy to provide projected image where you want.
Zoom and focus can be also adjusted with motor-driven operation.
Digital Zoom function adjusts image size to approx. 1/4 ~ 49 times of original image size, allowing you to focus on crucial information at a presentation.
Keystone Correction
Positioning of a projector may result in distorted image being displayed in a trapezoid shape. Keystone Correction solves this problem by digitally altering projection to produce undistorted images.
Power Management
Power Management function is provided to reduce power consumption while a projector is not in use.
This Power Management function operates to turn Projection Lamp off when a projector detects signal interruption and any button is not pressed over 5 minutes. Projection Lamp is automatically turned on again when a projector detects signal or any operation button is pressed.
This projector is shipped with this function ON.
Digital Visual Interface
This projector is equipped with DVI 24-pin terminal for connecting DVI output from a computer.
Laser Pointer Function
Remote Control Unit supplied with this projector includes Laser Pointer function. This function helps you to make a smart presentation on a projected screen.
Wireless Mouse
Remote Control Unit supplied with this projector has Wireless Mouse function for a connected computer. This function enables you to operate both projector and computer with Remote Control Unit only.
Multilanguage Menu Display
Operation menu is displayed in; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean or Japanese.
PJ-Net Organizer (Optional)
PJ-Net Organizer is an optional product to control and set up a projector via the network cable. By accessing to the connected projector using the web browser on your computer. It can be controlled and set up the projector remotely. Contact the sales dealer where you purchased this projector for optional parts.
6
PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET
TOP CONTROLS
AND INDICATORS
PROJECTION LENS
|
|
|
|
AIR INTAKE |
|
|
|
|
VENT |
LENS COVER |
|
|
|
INFRARED |
SPEAKERS |
REMOTE RECEIVER |
|||
BACK OF CABINET |
POWER CORD |
|
TERMINALS |
INFRARED |
EXHAUST VENT |
CONNECTOR |
AND CONNECTORS |
REMOTE RECEIVER |
|
|
|
|
||
|
|
|
|
|
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.
● Do not put a flammable object near this vent. ● Keep rear grills at least 3’(1 m) away from any object, especially heat-sensitive object.
● Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power LAMP COVER of Cooling Fans.
CARRYING
HANDLE
When attached the PJ-Net organizer (optional part) to the projector, remove the these parts. Refer to the owner's manual in the optional PJ-Net organizer.
BOTTOM OF CABINET
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
● Do not cover vent slots.
● Keep side clear of any objects. Obstructions may block cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
PREPARATION
SETTING-UP PROJECTOR
CONNECTING AC POWER CORD
This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure of type of power supply being in use.
Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.)
CAUTION
For safety, unplug AC Power Cord when an appliance is not used.
When this projector is connected to outlet with AC Power Cord, an appliance is in Stand-by Mode and consumes a little electric power.
Connect AC Power Cord (supplied) to a projector. AC outlet must be near this equipment and must be easily accessible.
NOTE ON POWER CORD
AC Power Cord must meet requirement of country where you use a projector.
Confirm an AC plug type with chart below and proper AC Power Cord must be used.
If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
Projector side |
|
|
|
|
|
AC Outlet side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
For the U.S.A. and Canada |
For Continental Europe |
For the U.K. |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ground |
|
|
|
|
||
To POWER CORD |
|
|
|
|
|
To the AC Outlet. |
|
To the AC Outlet. |
|
|
|||
CONNECTOR on your |
|
|
To the AC Outlet. |
|
(200 - 240 V AC) |
|
|
(120 V AC) |
|
|
|||
projector. |
|
|
(200 - 240 V AC) |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
PREPARATION
POSITIONING PROJECTOR
●This projector is designed to project on a flat projection surface.
●Projector can be focused from 4.6’ (1.4m) ~ 48.3’ (14.7m).
●Refer to figure below to adjust screen size.
ROOM LIGHT
Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image.
|
|
|
48.3’(14.7m) |
|
|
|
36.1’(11.0m) |
Max. Zoom |
400” |
|
|
24.0’(7.3m) |
||
|
|
|
|
|
11.8’(3.6m) |
300” |
|
308” |
|
200” |
|
|||
4.6’(1.4m) |
|
|
|
|
|
231” |
Min. Zoom |
|
|
|
100” |
|
||
40” |
154” |
|
|
|
|
|
|
||
77” |
|
|
|
|
|
|
|
|
|
31” |
|
|
|
|
Screen |
|
Max. Zoom |
|
40” |
|
|
100” |
|
|
150” |
|
|
200” |
|
|
250” |
|
|
300” |
|
|
400” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Min. Zoom |
|
31” |
|
|
77” |
|
|
115” |
|
|
154” |
|
|
192” |
|
|
231” |
|
|
308” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Distance |
|
4.6’ (1.4m) |
|
|
11.8’ (3.6m) |
|
|
17.7’ (5.4m) |
|
|
24.0’ (7.3m) |
|
|
30.2’ (9.2m) |
|
|
36.1’ (11.0m) |
|
|
48.3’ (14.7m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LENS SHIFT ADJUSTMENT
Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below.). Refer to P 20 for operation.
Highest (10 : 0) 
Lowest (1 : 1)
1
10 : 0
1
LENS INSTALLATION (For Lensless model PLC-XP46L only)
Before setting up a projector, install Projection Lens on
Projector.
1. Before installation, check where a projector is used and |
COVER CAP |
prepare suitable lens. For specifications of a Projection Lens, |
|
contact sales dealer where you purchased a projector. |
|
2. For installation, refer to installation manual in the optional lens.
NOTE;
When install the lens, remove the cover cap in the projector.
9
PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees.
1 |
Lift front of a projector and pull FEET LOCK LATCHES |
|
|
|
on both sides of a projector. |
|
|
2 |
Release FEET LOCK LATCHES to lock ADJUSTABLE |
|
|
|
FEET and rotate ADJUSTABLE FEET to fine tune |
|
|
|
position and tilt. |
|
|
3 |
To shorten ADJUSTABLE FEET, lift front of a projector |
|
|
|
and pull and undo FEET LOCK LATCHES. |
|
|
|
Position and keystone distortion of image can be adjusted |
|
|
|
using Menu Operation. (Refer to P 20 and 35.) |
|
|
|
NOTE : |
ADJUSTABLE FEET |
FEET LOCK |
|
|
LATCHES |
|
|
THIS PROJECTOR SHOULD BE SET IN THE WAY |
|
|
|
|
|
|
|
INDICATED. PROJECTION LAMP MAY MALFUNCTION. |
|
|
MOVING PROJECTOR
Use Carry Handle when moving a Projector.
When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet.
When this projector is not in use for an extended period, put it into case (dust cover) supplied with this projector.
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
●Do not drop or bump a projector, otherwise damages or malfunctions may result.
●When carrying a projector, use a suitable carrying case.
●Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.
10
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
COMPUTER INPUT
TERMINALS (DIGITAL/ANALOG)
Connect computer (digital/analog) output to one of these terminals. (Refer to P12.)
INPUT 1
|
|
|
|
-D) |
|
|
|
|
|
|
R/C |
USB |
|
RESET |
CONTROL PORT |
||
1 |
|
|
|
2 |
|
G |
B |
|
R |
H/V |
V |
Cb/Pb |
|
Cr/Pr |
|
|
|
|
|
|
INPUT 2 |
|
|
VIDEO/Y Cb/Pb |
Cr/Pr |
R–AUDIO–L |
S–VIDEO |
||
|
|||||
|
|
|
|
|
) |
|
|
|
INPUT 3 |
|
|
R/C JACK
When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied).
CONTROL PORT CONNECTOR
When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P12.)
VIDEO INPUT JACKS |
|
AUDIO INPUT JACKS |
|
S-VIDEO INPUT JACK |
|
|
Connect composite video |
Connect an audio output |
|
5 BNC INPUT JACKS |
|
|||
|
output from video equipment |
from video equipment to |
||
Connect component video |
to VIDEO/Y jack or connect |
these jacks. |
||
component video outputs to |
(Refer to P13.) |
|||
output (Y, Cb, Cr or Y, Pb, Pr) |
||||
VIDEO/Y, Cb/Pb and Cr/Pr |
|
|||
from video equipment to |
|
|||
jacks. (Refer to P13.) |
|
|||
VIDEO/Y, Cb/Pb and Cr/Pr |
|
|||
jacks or connect computer |
|
|
||
output {5 BNC Type (Green, |
|
|
||
Blue, Red, Horiz. Sync and |
|
|
||
Vert. Sync.)} from computer |
|
|
||
to G, B, R, H/V and V jacks. |
|
|
||
(Refer to P12 and 13.) |
|
|
||
Connect S-VIDEO output from video equipment to this jack. (Refer to P13.)
11
CONNECTING PROJECTOR
CONNECTING TO COMPUTER
Cables used for connection ( = Cable or adapter is not supplied with this projector.)
• VGA Cable (HDB 15 pin) |
• USB Cable |
• DVI-Digital Cable (for Single Link T.M.D.S.) |
• MAC Adapter (When connecting to Macintosh computer) |
• BNC Cable |
• Audio Cables (RCA x 2 and Mini Plug (stereo) x 1) |
• Control Cable for PS/2 Port, Serial Port or ADB Port |
|
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
Desktop type |
Laptop type |
Monitor Output |
|
|
|
Monitor Output |
USB port |
Audio Output Serial port |
PS/2 port |
ADB port |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB |
Audio |
Control Cable |
Control Cable |
Control Cable |
|
MAC Adapter |
DVI |
Cable |
for Serial Port |
for PS/2 Port |
for ADB Port |
|
|
Cable |
||||||
|
|
|
|
|
|||
BNC |
Set slide switches |
Cable |
|
(stereo) |
Terminal |
Terminal |
Terminal |
according to chart |
|
|
|||||
Cable |
|
|
|
|
|
|
|
below. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VGA Cable
|
|
|
|
|
COMPUTER |
Use one of these Control |
|
|
|
|
|
AUDIO IN 1 or 2 |
|
|
|
|
|
|
Cables corresponding with |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
terminal of your computer. |
|
USB |
|
|
|
|
|
COMPUTER IN ANALOG |
|
|
|
COMPUTER IN DIGITAL |
|
CONTROL |
|
|
|
|
|
||
|
|
|
|
|
|
PORT |
|
|
INPUT 1 |
|
|
|
|
ANALOG |
|
DIGITAL(DVI-D) |
|
|
||
|
|
|
|
R/C JACK |
|
|
USB |
|
RESET |
AUDIO 2 |
CONTROL PORT |
|
|
AUDIO 1 |
|
|
|
|
|
|
G |
B |
R |
H/V |
V |
|
|
VIDEO/Y Cb/Pb |
Cr/Pr |
|
|
INPUT 2 |
|
VIDEO/Y Cb/Pb Cr/Pr |
R–AUDIO–L |
S–VIDEO |
|
||
|
(MONO) |
|
|
INPUT 3 |
|
MAC ADAPTER
Set switches as shown in table |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
below depending on RESOLU- |
ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
TION MODE that you want to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
ON |
|
|
DIP |
|
|
|
|
|||||||
use before you turn on projec- |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
tor and computer. |
|
|
OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
1 |
2 |
3 |
4 |
|
|
|
|
5 |
|
|
|
6 |
|
|
|||
|
13" MODE (640 x 480) |
ON |
ON |
OFF |
OFF |
OFF |
|
|
|
OFF |
|
||||||||
|
16" MODE (832 x 624) |
OFF |
ON |
OFF |
ON |
OFF |
|
|
|
OFF |
|
||||||||
|
19" MODE (1024 x 768) |
OFF |
ON |
ON |
OFF |
OFF |
|
|
|
OFF |
|
||||||||
|
21" MODE (1152 x 870) |
ON |
ON |
ON |
ON |
OFF |
|
|
|
OFF |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminals
of a Projector
NOTE :
When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on.
12
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
Cables used for connection ( = Cable is not supplied with this projector.)
•Video Cable (RCA x 1 or RCA x 3)
•BNC Cable
•S-VIDEO Cable
•Audio Cable (RCA x 2)
Video Source (example)
Component video output equipment.
Video Cassette Recorder |
Video Disc Player |
(such as DVD player or high-definition TV source.) |
|
Composite |
Component Video Output |
Composite |
Component Video Output Audio Output S-VIDEO Output |
|||||||||||||
Video Output |
(Y, Cb/Pb, Cr/Pr) |
Video Output |
(Y, Cb/Pb, Cr/Pr) |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Video Cables |
|
|
|
|
(RCA x 1 or |
|
|
Audio Cable |
S-VIDEO |
RCA x 3) |
|
|
||
BNC Cable |
|
(RCA x 2) |
Cable |
|
|
|
|||
VIDEO |
Y - Cb/Pb - Cr/Pr VIDEO |
Y - Cb/Pb - Cr/Pr |
AUDIO IN |
S-VIDEO |
|
|
INPUT 1
ANALOG |
DIGITAL(DVI-D) |
R/C JACK
AUDIO 1 |
USB |
RESET |
|
CONTROL PORT |
||
|
|
AUDIO 2 |
|
|
||
G |
B |
|
R |
H/V |
|
V |
VIDEO/Y |
Cb/Pb |
|
Cr/Pr |
|
|
|
|
|
|
INPUT 2 |
|
|
|
VIDEO/Y Cb/Pb Cr/Pr |
R–AUDIO–L |
S–VIDEO |
||||
|
||||||
(MONO)
INPUT 3
Terminals
of a Projector
NOTE :
When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet.
13
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
Left Side
ON
ALL
OFF
ALL-OFF SWITCH
When using Remote Control Unit, turn this switch to “ON.” And turn it to “ALL OFF” when it is not used.
LASER POINTER INDICATOR
Lights red while laser beam is emitted from Laser Light Window.
MENU BUTTON
Used to select MENU operation. (P17, 18)
SELECT BUTTON
Used to execute item selected, or to expand or compress image in DIGITAL ZOOM +/– mode. (P29)
It is also used as a PC mouse in Wireless Mouse Operation. (P37)
LASER BUTTON
Used to operate Laser Pointer Function. Laser beam is emitted while pressing this button within 1 minute.
When using this Laser Pointer for more than 1 minute, release LASER button and press it again.
ON-OFF
ZOOM FOCUS VOLUME
LOCK
MUTE D.ZOOM INPUT
MENU
LASER
KEYSTONE
LENS SHIFT
NO SHOW |
FREEZE |
AUTO PC ADJ. |
IMAGE |
P-TIMER |
|
POWER ON-OFF BUTTON
Used to turn projector on or off. (P19)
INPUT BUTTON
Used to select input source. (P22)
POINT BUTTON
Used to move a pointer on ONSCREEN MENU, adjust each item, or pan image in DIGITAL ZOOM +/– mode. (P29)
It is also used as a PC mouse in Wireless Mouse Operation. (P37)
When pressing center of this button, it works as SELECT button.
RIGHT CLICK BUTTON
Used as a PC mouse in Wireless Mouse Operation. (P37)
P-TIMER BUTTON
Used to operate P-TIMER function. (P21)
LASER POINTER FUNCTION
This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window. When LASER button is pressed, laser light goes on. And when LASER button is being pressed for more than 1 minute or LASER button is released, light goes off. LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser beam is being emitted.
Laser emitted is a class II laser; therefore, do not look into Laser Light Window or shine laser beam on yourself or other people. Three marks bellow are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result hazardous radiation exposure.
These caution labels are put on remote control.
LASER POINTER INDICATOR
Laser Light Window 
14
Loading...