Samsung SL-M4030ND, M4030 Service Manual

MonoLaserPrinter

ProXpressM4030series SL-M4030ND

(Ver1.00)

MANUAL

SERVICE

MonoLaserPrinter

1.Precautions

2.ProductSpecicationsandDescription

3.DisassemblyandReassembly

4.Troubleshooting

5.SystemDiagram

6.ReferenceInformation

Contents

RefertotheservicemanualintheGSPN(seetherearcover)formoreinformation.

Contents

1.Precautions......................................................................................................................................1−1

1.1.Safetywarning........................................................................................................................1−1

1.2.Cautionforsafety....................................................................................................................1−2

1.2.1.Toxicmaterial.............................................................................................................1−2

1.2.2.Electricshockandresafetyprecautions.........................................................................1−2

1.2.3.Handlingprecautions...................................................................................................1−4

1.2.4.AssemblyandDisassemblyprecautions...........................................................................1−4

1.2.5.Disregardingthiswarningmaycausebodilyinjury............................................................1−5

1.3.ESDprecautions......................................................................................................................1−6

2.ProductSpecicationsandDescription..................................................................................................2−1

2.1.ProductOverview....................................................................................................................2−1

2.2.Specications..........................................................................................................................2−2

2.2.1.General.....................................................................................................................2−2

2.2.2.Printspecication........................................................................................................2−4

2.2.3.PaperHandlingspecication..........................................................................................2−5

2.2.4.SoftwareandSolution..................................................................................................2−7

2.2.5.Supplies.....................................................................................................................2−8

2.2.6.MaintenancePart.........................................................................................................2−8

2.2.7.Option.......................................................................................................................2−9

2.3.SystemConguration...............................................................................................................2−10

2.4.FeedingSystem.......................................................................................................................2−14

2.4.1.FeedingSystemOverview.............................................................................................2−14

2.4.2.Cassette.....................................................................................................................2−17

2.4.3.Pick-UpUnit..............................................................................................................2−18

2.4.4.MPF(Multi-PurposeFeeder)Unit...................................................................................2−18

2.5.ImageCreation........................................................................................................................2−19

2.5.1.Printingprocessoverview.............................................................................................2−19

2.5.2.TonerCartridge...........................................................................................................2−20

2.6.Fuserunit...............................................................................................................................2−21

2.7.LaserScanningUnit(LSU)........................................................................................................2−22

2.7.1.LaserScanningUnitOverview.......................................................................................2−22

2.7.2.LaserScanningOpticalpath..........................................................................................2−23

2.8.DriveSystem..........................................................................................................................2−24

2.8.1.DriveMotors..............................................................................................................2−24

2.8.2.MainDriveUnit..........................................................................................................2−25

2.8.3.ExitDriveUnit...........................................................................................................2−26

2.8.4.TrayLiftingDriveUnit.................................................................................................2−27

2.9.HardwareConguration............................................................................................................2−28

Contents

2.9.1.Mainboard.................................................................................................................2−30

2.9.2.OPE..........................................................................................................................2−31

2.9.3.SO-DIMMPBA..........................................................................................................2−33

2.9.4.CRUMPBA...............................................................................................................2−33

2.9.5.SCFboard..................................................................................................................2−34

2.9.6.NFCOptionalBoard(SL-NWE001X).............................................................................2−35

2.9.7.SMPSboard...............................................................................................................2−36

2.9.8.HVPSboard...............................................................................................................2−38

2.9.9.ElectricalPartsLocation...............................................................................................2−40

3.DisassemblyandReassembly..............................................................................................................3−1

3.1.Precautionswhenreplacingparts................................................................................................3−1

3.1.1.Precautionswhenassemblinganddisassembling...............................................................3−1

3.1.2.PrecautionswhenhandlingPBA.....................................................................................3−1

3.1.3.ReleasingPlasticLatches..............................................................................................3−2

3.2.Replacingthemaintenancepart..................................................................................................3−3

3.2.1.FuserUnit..................................................................................................................3−3

3.2.2.TransferRoller............................................................................................................3−5

3.2.3.SeparationRoller.........................................................................................................3−6

3.2.4.Pick-upRollerandForwardRoller..................................................................................3−7

3.2.5.SCFSeparationRoller..................................................................................................3−8

3.2.6.SCFPick-upRollerandForwardRoller...........................................................................3−9

3.3.ReplacingthemainSVCpart.....................................................................................................3−10

3.3.1.RightCover................................................................................................................3−10

3.3.2.LeftCover..................................................................................................................3−11

3.3.3.RearCover.................................................................................................................3−12

3.3.4.MainBoard................................................................................................................3−13

3.3.5.HVPSBoard...............................................................................................................3−14

3.3.6.SMPSBoard...............................................................................................................3−15

3.3.7.DuplexMotor.............................................................................................................3−16

3.3.8.FuserDriveUnit.........................................................................................................3−17

3.3.9.MainDriveUnit..........................................................................................................3−18

3.3.10.CST-LiftingDriveUnit.................................................................................................3−19

3.3.11.PaperSizeSensor........................................................................................................3−20

3.3.12.OPEBoard.................................................................................................................3−21

3.3.13.LSU..........................................................................................................................3−22

3.3.14.ExitUnit....................................................................................................................3−23

3.3.15.Bin-FullSensor...........................................................................................................3−24

3.3.16.MPUnit....................................................................................................................3−25

3.3.17.MPRoller..................................................................................................................3−27

3.3.18.SecondCassetteFeeder(OptionalTray)...........................................................................3−28

Contents

3.3.18.1.PBA-SCF....................................................................................................3−28

3.3.18.2.LiftUnit......................................................................................................3−29

3.3.18.3.Clutch.........................................................................................................3−30

3.3.18.4.DriveUnit...................................................................................................3−31

4.Troubleshooting................................................................................................................................4−1

4.1.Controlpanel..........................................................................................................................4−1

4.2.UnderstandingtheLEDs...........................................................................................................4−2

4.3.UpdatingFirmware..................................................................................................................4−3

4.3.1.UpdatethermwarebyusingtheUSBport......................................................................4−3

4.3.2.UpdatingfromtheNetwork..........................................................................................4−4

4.4.Clearingpaperjams..................................................................................................................4−8

4.5.Usefulmanagementtools..........................................................................................................4−22

4.5.1.SyncThru™WebService..............................................................................................4−22

4.5.2.SamsungEasyPrinterManager......................................................................................4−25

4.6.ServiceMode..........................................................................................................................4−27

4.7.Troubleshooting......................................................................................................................4−32

4.7.1.Procedureofcheckingthesymptoms...............................................................................4−32

4.7.2.ErrorCodeandTroubleshooting.....................................................................................4−33

4.7.2.1.11–2Txx(PaperMismatcherror)......................................................................4−37

4.7.2.2.Ax-xxxx(Motor_Fan_Sensorerror)..................................................................4−38

4.7.2.3.Cx-xxxx(TonerCartridgeerror).......................................................................4−41

4.7.2.4.H1-xxxx(OptionalCassetteerror)....................................................................4−44

4.7.2.5.Mx-xxxx(Jam_Paperhandlingerror)................................................................4−55

4.7.2.6.Sx-xxxx(Systemerror)..................................................................................4−62

4.7.2.7.U1-xxxx(Fusererror)....................................................................................4−67

4.7.2.8.U2-xxxxtype(LSU)errorcode........................................................................4−68

4.7.3.Imagequalityproblem..................................................................................................4−69

4.7.4.Othererrors................................................................................................................4−83

5.SystemDiagram................................................................................................................................5−1

5.1.BlockDiagram........................................................................................................................5−1

5.2.ConnectionDiagram.................................................................................................................5−2

6.ReferenceInformation........................................................................................................................6−1

6.1.ToolforTroubleshooting...........................................................................................................6−1

6.2.Glossary.................................................................................................................................6−2

6.3.TheSamplePatternfortheT est..................................................................................................6−8

6.4.ModelNameandCode.............................................................................................................6−9

6.5.DocumentRevisionList............................................................................................................6−10

1.Precautions

Inordertopreventaccidentsanddamagestotheequipmentpleasereadtheprecautionslistedbelowcarefullybefore servicingtheproductandfollowthemclosely .

1.1.Safetywarning

1)Onlytobeservicedbyafactorytrainedservicetechnician.

Highvoltagesandlasersinsidethisproductaredangerous.Thisproductshouldonlybeservicedbyafactorytrained servicetechnician.

2)UseonlySamsungreplacementparts.

Therearenouserserviceablepartsinsidetheproduct.Donotmakeanyunauthorizedchangesoradditionstothe productasthesecouldcausetheproducttomalfunctionsandcreateanelectricshocksorrehazards.

3)LaserSafetyStatement

TheprinteriscertiedintheU.S.toconformtotherequirementsofDHHS21CFR,chapter1SubchapterJfor ClassI(1)laserproducts,andelsewhereiscertiedasaClassIlaserproductconformingtotherequirementsof IEC/EN60825-1:2014.ClassIlaserproductsarenotconsideredtobehazardous.Thelasersystemandprinterare designedsothereisneveranyhumanaccesstolaserradiationaboveaClassIlevelduringnormaloperation,user maintenanceorprescribedservicecondition.

1.Precautions

•Wavelength:800nm

•Beamdivergence

-Parallel:11degrees

-Perpendicular:35degrees

•Maximumpowerofenergyoutput:12mW

WARNING

NeveroperateorservicetheproductwiththeprotectivecoverremovedfromLaser/Scannerassembly.Thereected beam,althoughinvisible,candamageyoureyes.

Whenusingthisproduct,thesebasicsafetyprecautionsshouldalwaysbefollowedtoreduceriskofre,electric shock,andpersonalinjury.

4)Lithiumbatterynotreplaceablebyuser

1.Precautions

1.2.Cautionforsafety

1.2.1.Toxicmaterial

Thisproductcontainstoxicmaterialsthatcouldcauseillnessifingested.

1)Pleasekeepimagingunitandtonercartridgeawayfromchildren.Thetonerpowdercontainedintheimagingunitand tonercartridgemaybeharmful,andifswallowed,youshouldcontactadoctor.

1.2.2.Electricshockandresafetyprecautions

Failuretofollowthefollowinginstructionscouldcauseelectricshockorpotentiallycauseare.

1)Useonlythecorrectvoltage,failuretodosocoulddamagetheproductandpotentiallycauseareorelectricshock.

2)Useonlythepowercablesuppliedwiththeproduct.Useofanincorrectlyspeciedcablecouldcausethecableto overheatandpotentiallycauseare.

3)Donotoverloadthepowersocket,thiscouldleadtooverheatingofthecablesinsidethewallandcouldleadtoare.

4)Donotallowwaterorotherliquidstospillintotheproduct,thiscancauseelectricshock.Donotallowpaperclips,pins orotherforeignobjectstofallintotheproduct,thesecouldcauseashortcircuitleadingtoanelectricshockorrehazard.

5)Nevertouchtheplugsoneitherendofthepowercablewithwethands,thiscancauseelectricshock.Whenservicing theproduct,removethepowerplugfromthewallsocket.

6)Usecautionwheninsertingorremovingthepowercord.Whenremovingthepowercord,gripitrmlyandpull.The powercordmustbeinsertedcompletely,otherwiseapoorcontactcouldcauseoverheatingleadingtoare.

7)Takecareofthepowercable.Donotallowittobecometwisted,bentsharplyaroundcornersorpowercablemaybe damaged.Donotplaceobjectsontopofthepowercable.Ifthepowercableisdamageditcouldoverheatandcausea re.Exposedcablescouldcauseanelectricshock.Replacethedamagedpowercableimmediately,donotreuseor repairthedamagedcable.Somechemicalscanattackthecoatingonthepowercable,weakeningthecoverorexposing cablescausingreandshockrisks.

1.Precautions

8)Ensurethatthepowersocketsandplugsarenotcrackedorbrokeninanyway.Anysuchdefectsshouldberepaired immediately.T akecarenottocutordamagethepowercableorplugswhenmovingthemachine.

9)Usecautionduringthunderorlightningstorms.Samsungrecommendsthatthismachinebedisconnectedfromthe powersourcewhensuchweatherconditionsareexpected.Donottouchthemachineorthepowercordifitisstill connectedtothewallsocketintheseweatherconditions.

10)A voiddampordustyareas,installtheproductinacleanwellventilatedlocation.Donotpositionthemachineneara humidierorinfrontofanairconditioner.Moistureanddustbuiltupinsidethemachinecanleadtooverheatingand causeareorcausepartstorust.

11)Donotpositiontheproductindirectsunlight.Thiswillcausethetemperatureinsidetheproducttorisepossiblyleading totheproductfailingtoworkproperlyandinextremeconditionscouldleadtoare.

12)Donotinsertanymetalobjectsintothemachinethroughtheventilatorfanorotherpartofthecasing,itcouldmake contactwithahighvoltageconductorinsidethemachineandcauseanelectricshock.

13)WhenreplacingtheSMPSboard,pleasewait5minutesafterunpluggingthepowercord,thenreplaceit.Y ou cangetashockbytheelectricdischarge.

1.Precautions

1.2.3.Handlingprecautions

Thefollowinginstructionsareforyourownpersonalsafetytoavoidinjuryandsoasnottodamagetheproduct.

1)Ensuretheproductisinstalledonalevelsurface,capableofsupportingitsweight.Failuretodosocouldcause theproducttotiporfall.

2)Theproductcontainsmanyrollers,gearsandfans.Takegreatcaretoensurethatyoudonotcatchyourngers,hairor clothinginanyoftheserotatingdevices.

3)Donotplaceanysmallmetalobjects,containersofwater,chemicalsorotherliquidsclosetotheproductwhichifspilled couldgetintothemachineandcausedamageorashockorrehazard.

4)Donotinstallthemachineinareaswithhighdustormoisturelevels,besideonopenwindoworclosetoahumidieror heater.Damagecouldbecausedtotheproductinsuchareas.

5)Donotplacecandles,burningcigarettes,etcontheproduct,Thesecouldcauseare.

6)Ensurethatthemachineisinstalledandusedinproperareatomeetthetemperatureandhumidityspecications.

•IfthemachineisstoredatbelowzeroCelsiusforalongtime,donotusethemachineinstantlyaftermovement.It canmalfunction.Takecareofthemachinestorage.IfthemachineisstoredatbelowzeroCelsiusforalongtime, keepthemachineatroomtemperatureandinstallit.

1.2.4.AssemblyandDisassemblyprecautions

1)ReplacepartscarefullyandalwaysuseSamsungparts.T akecaretonotetheexactlocationofpartsandalsocable routingbeforedismantlinganypartofthemachine.Ensureallpartsandcablesarereplacedcorrectly.Pleasecarryout thefollowingproceduresbeforedismantlingtheproductorreplacinganyparts.

2)Ensurethatpowerisdisconnectedbeforeservicingorreplacinganyelectricalparts.

3)Disconnectinterfacecablesandpowercables.

4)Onlyuseapprovedspareparts.Ensurethatpartnumber,productname,anyvoltage,currentortemperaturerating arecorrect.

5)Whenremovingorre-ttinganypartsdonotuseexcessiveforce,especiallywhenttingscrewsintoplastic.

6)Takecarenottodropanysmallpartsintothemachine.

7)HandlingoftheOPCDrum

•TheOPCDrumcanbeirreparablydamagedifitexposedtolight.TakecarenottoexposetheOPCDrumeither todirectsunlightortouorescentorincandescentroomlighting.Exposureforaslittleas5minutescandamage thesurfaceofthephotoconductivepropertiesandwillresultinprintqualitydegradation.T akeextracarewhen servicingtheproduct.RemovetheOPCDrumandstoreitinablackbagorotherlightproofcontainer.T ake carewhenworkingwiththeCovers(especiallythetopcover)openaslightisadmittedtotheOPCareaandcan damagetheOPCDrum.

•TakecarenottoscratchthegreensurfaceofOPCDrumUnit.IfthegreensurfaceoftheDrumCartridgeis scratchedortouchedtheprintqualitywillbecompromised.

1.2.5.Disregardingthiswarningmaycausebodilyinjury

1)Becarefulwiththehightemperaturepart.

Thefuserunitworksatahightemperature.Usecautionwhenworkingontheprinter.Waitforthefuserunitto cooldownbeforedisassembly.

2)Donotputngersorhairintotherotatingparts.

Whenoperatingaprinter,donotputhandorhairintotherotatingparts(Paperfeedingentrance,motor,fan,etc.). Ifdo,youcangetharm.

1.Precautions

3)Whenyoumovetheprinter,usesafeliftingandhandlingtechniques.

Thisprinterisheavy .Usetheliftinghandleslocatedoneachsideofthemachine.Backinjurycouldbecausedif youdonotliftcarefully.

4)Ensuretheprinterisinstalledsafely.

Ensuretheprinterisinstalledonalevelsurface,capableofsupportingitsweight.Failuretodosocouldcausethe printertotiporfallpossiblycausingpersonalinjuryordamagingtheprinter.

5)Donotinstalltheprinteronaslopingorunstablesurface.Afterinstallation,doublecheckthattheprinterisstable.

1.Precautions

1.3.ESDprecautions

Certainsemiconductordevicescanbeeasilydamagedbystaticelectricity.Suchcomponentsarecommonlycalled “ElectrostaticallySensitive(ES)Devices”orESDs.ExamplesoftypicalESDsare:integratedcircuits,someeldeffect transistors,andsemiconductor“chip”components.Thetechniquesoutlinedbelowshouldbefollowedtohelpreducethe incidenceofcomponentdamagecausedbystaticelectricity.

CAUTION

Besurenopowerisappliedtothechassisorcircuit,andobserveallothersafetyprecautions.

1)Immediatelybeforehandlingasemiconductorcomponentorsemiconductor-equippedassembly,drainoffany electrostaticchargeonyourbodybytouchingaknownearthground.Alternatively,employacommerciallyavailable wriststrapdevice,whichshouldberemovedforyourpersonalsafetyreasonspriortoapplyingpowertotheunit undertest.

2)AfterremovinganelectricalassemblyequippedwithESDs,placetheassemblyonaconductivesurface,suchas aluminumorcopperfoil,orconductivefoam,topreventelectrostaticchargebuildupinthevicinityoftheassembly.

3)UseonlyagroundedtipsolderingirontosolderordesolderESDs.

4)Useonlyan“anti-static”solderremovaldevice.Somesolderremovaldevicesnotclassiedas“anti-static”can generateelectricalchargessufcienttodamageESDs.

5)DonotuseFreon-propelledchemicals.Whensprayed,thesecangenerateelectricalchargessufcienttodamageESDs.

6)DonotremoveareplacementESDfromitsprotectivepackaginguntilimmediatelybeforeinstallingit.Most replacementESDsarepackagedwithallleadsshortedtogetherbyconductivefoam,aluminumfoil,oracomparable conductivematerial.

7)ImmediatelybeforeremovingtheprotectiveshortingmaterialfromtheleadsofareplacementESD,touchtheprotective materialtothechassisorcircuitassemblyintowhichthedevicewillbeinstalled.

8)MaintaincontinuouselectricalcontactbetweentheESDandtheassemblyintowhichitwillbeinstalled,until completelypluggedorsolderedintothecircuit.

9)MinimizebodilymotionswhenhandlingunpackagedreplacementESDs.Normalmotions,suchasthebrushingtogether ofclothingfabricandliftingone’sfootfromacarpetedoor,cangeneratestaticelectricitysufcienttodamageanESD.

2.ProductSpecicationsandDescription

2.1.ProductOverview

2.ProductSpecicationsandDescription

1)Speed

•Upto40ppminA4(42ppminLetter)

2)Processor

•DualCore1GHz

3)Memory(Std/Max)

•256MB/2GB

4)Interfaces

•High-SpeedUSB2.0

•10/100/1000BaseTXEthernet

•4LineLCD

5)Tonercartridgeyield

•Initial:6,000pages

•Standard:10,000pages

•Highyield:20,000pages

2.ProductSpecicationsandDescription

2.2.Specications

ProductSpecicationsaresubjecttochangewithoutnotice.

NOTE

Thespecicationinthismanualisthereferenceinformationforserviceengineer.Donotusethisspecicationforsales.

2.2.1.General

ItemSpecication

ProcessorCPUDualCore1GHz(C4N+A1000)

OperationalPanel4LineLCD

LED7EA(PowerKey/ECO/Status/Navigation) UserInterface

Key/Button18EA(3x4Numerickey,Power,ECO,Menu,OK,Start,Stop)

Memory

Interface

WarmupTime

Temperature

Humidity

NoiseLevel

Standard256MB

Max.(Option)2GB

USB(Device)Hi-SpeedUSB2.0

USB(Host)Hi-SpeedUSB2.0

USB(EDI)Yes

WiredLANStd(Ethernet10/100/1000BaseTX)

WirelessLANOption(IEEE802.11b/g/n)

NFCOption(Active)

RJ11ConnectorYes

FromSleepLessthan16sec

PowerOffLessthan35sec

Operating10to30°C(50to86°F)

Storage-20to40°C(-4to104°F)

Operating20to80%RH

Storage10to90%RH

StandbyLessthan30dB(A)

PrintModeLessthan53dB(A)

ReadyLessthan50W

Normaloperation700W

PowerConsumption

Dimension(WxDxH)421.4x405.9x351mm(16.6x16x13.8inches)

WeightMachinewithsupplies16.6kg(36.6lb)

Max/Peak1100W

Sleep1.21W

PowerOff0.1W

TEC1.9KWh/week

ItemSpecication

2.ProductSpecicationsandDescription

Reliability&Service

RecommendedMonthly PrintingV olume(AMPV)

Max.MonthlyPrint V olume

1,500-14,000pages

120,000pages

2.ProductSpecicationsandDescription

2.2.2.Printspecication

ItemSpecication

SimplexUpto40ppminA4(42ppminLetter) PrintSpeed

DuplexUpto20ipminA4(20ipminLetter)

ReadyModeAsfastas7sec FPOT

SleepModeLessthan18.5sec

Optical(Standard)1200x600dpi Resolution

EnhancedUpto1,200x1,200dpieffectiveoutput(1,200x600x2bit)

PrinterLanguagesPCL5e/PCL6/PostScript3/PDFDirectV1.7/XPS/TIFF/URF

/PWG

PCL96ScalableFonts(IncludeOCR-A/OCR-B)/1Bitmap Font

Postscript3136ScalableFonts

ClientOSSupport

NetworkProtocol

WindowsWindowXP(32/64bit)/V ista(32/64bit)/2003Server(32/64bit)/

2008Server(32/64bit)/Win7(32/64bit)/2008ServerR2(64bit)/ Win8(32/64bit)/Win8.1(32bit/64bit)/2012Server(64bit)/2012 ServerR2(64bit)

Linux•RedHatEnterpriseLinux5,6,7

•Fedora13,14,15,16,17,18,19,20,21

•openSUSE11.3,11.4,12.1,12.2,12.3,13.1,13.2

•Ubuntu10.04,10.10,11.04,11.10,12.04,12.10,13.04,13.10,

14.04,14.10

•SUSELinuxEnterpriseDesktop11,12

•Debian6,7

•Mint13,14,15,16,17

UNIX•SunSolaris9,10,11(x86,SP ARC)

•HP-UX11.0,11iv1,11iv2,11iv3(PA-RISC,Itanium)

•IBMAIX5.1,5.2,5.3,5.4,6.1,.7.1(PowerPC)

MacOSMacOS:X10.6-10.10

BasicStandardTCP/IP(Raw),IPassign(DHCP ,BOOTP ,AutoIP),

HTTP,HTTPs,IPP ,IPPs,WSD,SNMPv1/v2c/v3,SetIP ,SLP ,DNS, DDNS,Bongjour,WINS,LPD/LPR,ThinPrint,GoogleCloudPrint, SMTP,SMTPs,UPnP ,LDAP,Kerberos,SMB,IPSec,802.1x

Advanced(Wi-Fisupport:Opensystem,SharedKey,WP APersonal,WP A2

Personal(PSK),WP AEnterprise,WPA2Enterprise,WEP64, WEP128,TKIP,AES)

2.2.3.PaperHandlingspecication

ItemSpecication

2.ProductSpecicationsandDescription

StandardCapacity

Max.Capacity2850sheet(550standardcassette+100MP+4x550SCF)

Capacity550sheet@75g/m²(520sheet@80g/m²)

Mediasizes

Mediatypes

StandardCassetteTray

Mediaweight

Sensing

•550sheetCassetteTray@75g/m²

•100sheetMultiPurposeTray@75g/m²

A4/A5/A6/Letter/Legal/Ocio/Folio/JISB5/ISOB5/ Executive/Statement/PostCard4x6/EnvelopeMonarch/Envelope No9/EnvelopeNo10/EnvelopeDL/EnvelopeC5/Envelope C6/Custom

Plain/Thin/Bond/Punched/Pre-Printed/Recycled/Envelope /Label/CardStock/Letterhead/Thick/Colored/Archive/Cotton

SupportedWeight:60to163g/m²(16~43lb)

•ThinPaper(60~69g/m²)

•PlainPaper(70~90g/m²)

•ThickPaper(91~105g/m²)

•BondPaper(105~120g/m²)

•Cardstock(106~163g/m²)

•H/WInstallDetect:Y es

•PaperEmpty:Y es

•Paperlowleveldetect:Y es

•PaperT ypeDetect:No

•PaperSizeDetect:Y es

Multi-purposetray

Capacity

Mediasizes

Mediatype

Mediaweight

SensingPaperEmpty

•PlainPaper:100sheets@75g/m²

•Envelope:10sheets

Min:76.2mmx127mm(3"x5")

Max:216mmx356mm(8.5"x14.0")

Plain/Thin/Bond/Pre-printed/Recycled/Envelope/Label/ Cardstock/Thick/Cotton/Colored/Archive/Thicker/Punched/ Letterhead

SupportedWeight:60-220g/m²(16~59lb)

•ThinPaper(60-69g/m²)

•PlainPaper(70-90g/m²)

•ThickPaper(91-105g/m²)

•BondPaper(105-120g/m²)

•Cardstock(106-163g/m²)

•ThickerPaper(164-220g/m²)

2.ProductSpecicationsandDescription

ItemSpecication

Capacity550sheet@75g/m²(520sheet@80g/m²)

Mediasizes

A4/A5/Letter/Legal/Ocio/Folio/JISB5/ISOB5/Executive /Statement/EnvelopeNo9/EnvelopeNo10/EnvelopeDL/ EnvelopeC5/Custom

OptionalCassetteTray

OutputStacking

Mediatypes

Plain/Thin/Bond/Punched/Pre-Printed/Recycled/Envelope /Label/CardStock/Letterhead/Thick/Colored/Archive/Cotton

SupportedWeight:60-163g/m²(16-43lb)

•ThinPaper(60-69g/m²)

Mediaweight

•PlainPaper(70-90g/m²)

•ThickPaper(91-105g/m²)

•BondPaper(105-120g/m²)

•Cardstock:(106-163g/m²)

•H/WInstallDetect:Y es

•PaperEmpty:Y es

Sensing

•Paperlowleveldetect:Y es

•PaperT ypeDetect:No

•PaperSizeDetect:Y es

CapacityFace-Down:250sheets@80g/m²

OutputFullsensingYes

Max.Size216x356mm(8.5"x14")

Min.Size76.2x127mm(3"x5") Printingsize

Margin(T/B/L/R)T/B/L/R:1mm

SupportBuilt-in

MediasizesA4/Letter/Ocio/Folio/Legal/JISB5/ISOB5/Executive/

DuplexPrinting

Statement/A5

MediatypesPlain/Thin/Thick/Recycled/Bond/Pre-printed/Cotton/Colored

Mediaweight60~120g/m²(16-32lb)

2.2.4.SoftwareandSolution

ItemSpecication

AnywebPrintN/A

EasyPrinterManagerWindows/Mac

EasyColorManagerN/A

EasyDocumentCreatorN/A

2.ProductSpecicationsandDescription

Application

MobilePrinting

Solution

NetPCFaxN/A

DirectPrintingUtilityWindows

EasyDeployment Manager

EasyEcoDriverWindows

UniversalPrinterDriverWindows/Mac

GCP(GoogleCloudPrint)Y es

AirPrintYes

DeviceManagementSyncThru

OutputManagementCounThru

DocumentManagement andDistribution

SecuritySecuThru

MobilityAny#

Authentication(Local)Y es

Authentication(Network)Y es(Kerberos/SMB/LDAP)

IPAddressFilteringIPv4Filtering/IPv6Filtering/MACFiltering

HDDOverwrite (Standard)

Windows

SmarThruWorkFlow

N/A

HDDOverwrite(Max. Overwrites)

Security

SecurePrintYes

EncryptedSecurePrintN/A

EncryptedPDFMode (EncryptedScanning)

IPSecY es

SmartCard Authentication

N/A

2.ProductSpecicationsandDescription

2.2.5.Supplies

ItemsModelNameLife

Initial-Approx.6,000pages

StandardMLT-D201SApprox.10,000pages TonerCartridge

HighYieldMLT-D201LApprox.20,000pages

NOTE

DeclaredyieldvalueinaccordancewithISO/IEC19752.Thenumberofpagesmaybeaffectedbyoperatingenvironment, printinginterval,graphics,mediatypeandmediasize.

Dependingontheoptions,percentageofimageareaandjobmodeused,thetonercartridge’slifespanmaydiffer.

2.2.6.MaintenancePart

Someofthemachine’ spartshaveshorterlifespanthanmachine’slife.

Toensurethatthemachineproducesgoodcopiesandtoextenditsservicelife,itisrecommendedthatthesemaintenance partsatspecicintervalsbereplacedasinstructed.

ItemPartCodeLife

Pickup/Forwardroller

(forTray1)

Separationroller

(forTray1)

MPPickup/ForwardrollerJC90-01540A100,000pages

MPSeparationrollerJC73-00328A100,000pages

TransferrollerJC66-02842A100,000pages

FuserUnit•JC91-01023A(110V)

Pickup/Forwardroller

(forOptionalTray)

Separationroller

(forOptionalTray)

NOTE

JC93-00540B200,000pages

JC93-00540B100,000pages

90,000pages

•JC91-01024A(220V)

JC97-02259A200,000pages

JC97-02259A100,000pages

•Dependingontheprintpatternsandjobmodeused,thelifespanmaydiffer.

•RefertoChapter3.2.2forreplacingthemaintenanceparts.

2.2.7.Option

OptionList

ItemModelRemark

2.ProductSpecicationsandDescription

Optionaltrays(Tray2,Tray3,Tray4)SL-SCF4000

StandSL-DSK065S-

MemorymoduleSL-MEM0012GB

Wireless/NFCkitSL-NWE001XWireless+NFC

550Sheets(Plainpaper75g/m²(20lb bond))

2.ProductSpecicationsandDescription

2.3.SystemConguration

1)FrontView

1Controlpanel

2Coverforoptionalmemory*

3Frontcover

4Paperlevelindicator

5Optionaltrays**

6Tray1

7Multi-purposetray

*Openthiscovertoinstalltheoptionalmemoryandoptionaltray .

**Installtheoptionaltrayifitisnecessary.

8Outputtray

9Paperwidthguidesonamulti-purposetray

10Tonercartridge

11Outputsupport

12USBmemoryport

2)Rearview

2.ProductSpecicationsandDescription

1EDIportforcardreader

2Networkport

3USBport

4Power-switch

5Powerreceptacle

6Rearcover

7Duplexunit

2.ProductSpecicationsandDescription

3)SystemLayout

1Exit

2LSU

3FuserUnit

4Cassette

5Optionaltray

(SCF2nd,3th,4th,5th)

6Pickuproller/Separationroller/Forwardroller

7MPtray

8TonerCartridge

4)PaperPath

2.ProductSpecicationsandDescription

2.4.FeedingSystem

2.4.1.FeedingSystemOverview

ThefeedingsystempicksupapaperfromthecassetteorMPtrayandtransportsittothemachineinside.Itmainly consistsofthecassette,pickup/forward/reverse(separation)roller,feedroller,registrationroller,transferrollerunit,exit unit,duplexunitanddriveunit.

[FeedingSystemComponent]

2.ProductSpecicationsandDescription

No.Description

1Tray1Papertray

2Tray2Papertray

3Tray3Papertray

4Tray4Papertray

5Tray5Papertray

6Tray1pickup/separation/forwardrollers

7Tray2pickup/separation/forwardrollers

8Tray3pickup/separation/forwardrollers

9Tray4pickup/separation/forwardrollers

10Tray5pickup/separation/forwardrollers

No.Description

11MPTraypickup/separation/forwardrollers

12Tray1feedroller

13Tray2feedroller

14Tray3feedroller

15Tray4feedroller

16Tray5feedroller

17Registrationsensor

18Registrationroller

19Transferroller

20Exitsensor

2.ProductSpecicationsandDescription

No.Description

21Exitroller1

22Exitroller2

No.Description

23Exitroller3

24Binfullsensor

•Pick-Uproller(Tray1,2,3,4andMPTray)

-Thisrollerpicksupthepaperfromthetray.

•Forwardroller(Tray1,2,3,4andMPTray)

-Thisrollerisplacedagainstthereverseroller.Ittransportsthepaperfromthepickuprollertofeedroller.

•Reverseroller(Tray1,2,3,4andMPTray)

-Thisrollerisplacedagainsttheforwardrollerandtransportsonlyonesheettothefeedroller.Whentwosheetsof

paperormorearetransportedfromthepickuproller,theloadofthetorquelimiterofthereverserollerisheavier thanthefrictionalforcebetweenthesheets.Asaresult,thereverserollerisstoppedandthelowerpaperdoes notadvanceanyfurther.

•Feedroller

-Thisrollertransportsthepapersentfromtheforward/reverserollertotheregistrationroller.

•Registrationroller

-ThisrolleralignstheleadingedgeofthepaperandtransportsthepapertothetransferrollerAssy.

•Registrationsensor

-Thissensordetectsthattheleadingedgeofthepaperisarrivedtotheregistrationrollerandthetailedgepassed

bytheregistrationroller.

•ExitSensor

-Thissensordetectsthattheleadingedgeofthepaperisarrivedtotheexitroller1andthetailedgepassedbythe

exitroller1.

2.4.2.Cassette

Thecassettestorespapers.

Papersizeissetusingthepaperguideintray.

BasicCassette(Tray1)

2.ProductSpecicationsandDescription

•Specication

1)Structure:DrawerType

2)Paperseparation:Reverserollertype

3)Capacity:550Sheets(80g/m²paperstandard)

4)Paper

-Plainpaper:A6,Statement,A5,Executive,B5,A4,Letter,Folio,Ocio,Legal

-Autodetect:A5,Executive,B5,A4,Letter,Folio,Legal,Ocio(8Types)

-SpecialPaper:Envelope,Label,Cardstock

5)Weight:plainpaper60~163g/m²

6)Plateknockuplifttype:LiftMotor+UpLimitSensor

2.ProductSpecicationsandDescription

2.4.3.Pick-UpUnit

Whenpickuptakesplace,thepickuprollertransportsthepaper .TheKNOCK-UPmovesupbytheelevatingmotorand thepickuprollercomesintocontactwiththepaper.Theforwardrollerandtheseparationrollerservetomakesurethata singlesheetofpaperismovedtothepaperpath,andthepaperismovedasfarastheregistrationrollerbythework oftheverticalpathroller.

2.4.4.MPF(Multi-PurposeFeeder)Unit

TheMPFUnitallowsfeedingofspecialtymediastock,envelopes,andcustomsizepaper.

■Specication

1)Traycapacity:100sheets(80g/m²standardpaper)

2)MediaSize:Max8.5”×14”(215.9x355.67mm)/Min3”×5”(76.2x127mm)

3)Mediaweight:Plainpaper60~220g/m²

2.5.ImageCreation

2.5.1.Printingprocessoverview

Thismachineusesatonercartridge,transferroller,andLSUformonoprinting.

2.ProductSpecicationsandDescription

Thetonercartridgeasintegratedtypeconsistsofthetonerbottle,drumunitanddevelopmentunit.Thedrumunit consistsofanOPCdrum,chargeroller,cleaningroller,andcleaningblade.Thedevelopmentunitconsistsofthedeve. roller,supplyroller,Dr.blade,andagitator.

TheOPCdrumischargedwithanegativevoltagebythechargerollerandisexposedbythelightfromtheLSU(Laser Scanningunit).

ThelightproducedbyalasercreatesalatentimagebydischargingonthesurfaceoftheOPCdrum.Thenegativelycharged tonersareattractedtothelatentimageduetotheelectriceld.Thetoner(realimage)ontheOPCdrumaremovedtothe paperbythepositivebiasappliedtothetransferroller.

1)OPCdrumcharge:ThechargerollergivestheOPCdrumanegativecharge.

2)Laserexposure:Lightproducedbyalaserdiode(LD)hitsthechargedOPCdrumthroughthelensandmirrors.The machinecontrolsthelaserbeamon/offforthelatentimage.

3)Development:ThedevelopingrollercarriesthenegativelychargedtonertothelatentimageontheOPCdrumsurface.

4)Transfer:Thenegativelychargedtoneristransferredtothepaperbytransfervoltage.

5)CleaningforOPCdrum:ThecleaningbladeremoveremainingtonerontheOPCdrumsurfaceafterimagetransfer tothepaper.

2.ProductSpecicationsandDescription

2.5.2.TonerCartridge

Thetonercartridgeasintegratedtypeconsistsofthetonerbottle,drumunitanddevelopmentunit.

TheOPCdrumdiameteris24.03mm(circumference:about75.4mm)./Deverollerdiameteris14.07mm(circumference: about37mm).

Thetonercartridgeusesnonmagnetic1elementshattertypetoner,theremainingtonerisdetectedbyCRUMasDot Countmethod.

Aftertheimageismovedtotransferroller,theremainingtonerontheOPCdrumisremovedbythecleaningblade.

TheCRUMchipintonercartridgestoresinformationlikeaserialnumber,count.

Development

ThetonerissuppliedtotheAgitator-Toner1bytheAgitator-Toner2andmovesfromthesupplyrollertodeveroller.

AfterthesuppliedtonerondeverollerexitsfromtheDr .blade,itformsadeveloperbrush.Thentonerisattractedtothe surfaceoftheOPCdrumonlyinareasthecorrespondstotheimagearea.

+ 148 hidden pages