NEXTUNE
NEXTUN E
DIGITAL G UITAR & BASS TUNER AND TONE GENERATOR
6Z
DIGITAL CHROMATIC TUNER AND TONE GENERATOR
MODEL
12Z
Congratulations on purchasing a Sabine NexTune. Your NexTune combines two great
music accessories in one compact unit.
Tuner Guitar or Bass
Mode Indicator
(Model 6z Only)
Tuner Mode:
Note being played
Tone Generator Mode:
Note being generated
BUILT-IN
MICROPHONE
BUILT-IN SPEAKER
TM
Tone Generator
Mode Indicator
Calibration Pitch
(A= 338, 339, 440,
441, 442, 443)
¼-INCH IN-PUT JACK
[YELLOW] [GREEN] [RED]
FLAT IN-TUNE SHARP
SABINE
ON BUTTON:
Press once to power on or
off
MODE BUTTON
• NexTune 6z: Selects
the Guitar or
BassTuner, or Tone
Generator function
• NexTune 12z: Selects
the ChromaticTuner or
Tone Generator function
UP & DOWN BUTTONS:
Each click changes the
value one step at a time
(values cycle at end of
range)
®
MT9000 INSTRUCTIONS
Instructions for Tuning
• The NexTune 6z is a 6-note automatic tuner. GUITAR mode will help you tune each of
the 6 strings on a guitar, and BASS mode will help you tune your 4-string bass.
• The NexTune 12z is a chromatic tuner and will automatically select the note being
played within a range of A#2 to C#6.
Position your tuner next to your instru-
1
ment, or connect to your instrument
using the ¼-inch input. Press the ON
button to power on your NexTune.
NexTune 6z
2
ton to select GUITAR or BASS tuner
mode.
NexTune 12z
ton to select the Chromatic Tuner mode.
NOTE: The unit will be silent in the Tuner
mode, and will emit a loud tone in the
Tone Generator mode.
3
Play the note or string you wish to tune. The played note
will appear in the upper left hand corner of the LCD.
The NexTune gives you two visual cues for tuning: LCD
needle and LEDs. The left LED flashes yellow when flat,
the right flashes red when sharp and the middle green
LED lights when in tune. Adjust your instrument until the
needle centers on "0" and the middle LED lights green.
TUNER INSTRUCTIONS
: Press the MODE but-
: Press the MODE but-
ON
MODE
ON
MODE
GUITAR & BASS
mode on model 6z
only.
TUNER INSTRUCTIONS
Instructions for Calibrating the Tuner
The NexTune allows you to calibrate your tuner to other than the standard A = 440 Hz.
ON
With the NexTune powered on,
1
press the MODE button until the unit
goes into Tuner mode.
Press the UP or DOWN button until
2
the desired frequency for the A3 note
appears under PITCH in the LCD.
In the example given at right, the
tuner’s scale has been shifted to reference A = 441 Hz instead of the
standard A = 440 Hz.
MODE
ON
MODE
NOTE: To return the tuner to standard A =
440 Hz, press the UP or DOWN button until
440 appears in the LCD under PITCH.
TONE GENERATOR INSTRUCTIONS
Using the Tone Generator
The Tone Generator emits a loud tone according to the note you specifiy.
ON
Press the ON button to turn on your
1
NexTune.
Press the MODE button until the
2
NexTune emits a loud tone and the
words TONE appear in the
NexTune's LCD. The note being
generated will appear in the upper
left corner of the LCD.
Use the UP or DOWN button to se-
3
lect the note. The Tone Generator
range is from A#2 to C#6.
MODE
ON
MODE
NexTune generating an A (440
Hz) note.
ON
MODE
NexTune generating an A#.
Loading...