METROTUNETM |
SABINE |
® |
|
MT9000 T O N E G E N E R A T O R |
|
|
|
DIGITAL METRONOME |
|
|
|
C H R O M A T I C T U N E R |
|
|
|
|
|
|
|
|
|
|
|
Congratulations on purchasing a Sabine MetroTune MT9000. The MetroTune combines a great combination of music accessories in one compact unit.
BUTTONS & FUNCTIONS (Color Coded Labels)
Tuner: Dark Grey
Metronome: Purple
Tone Generator: Green
¼-inch input jack
CALIB / TEMPO / PITCH Up & Down buttons:
Each click increases/decreases the value one step at a time until the maximum/minimum value is reached (values cycle at end of range).
Earphone jack
VOLUME wheel:
Adjusts speaker volume for Metronome and Tone Generator.
TUNER / METRO / TONE switch:
Selects the Tuner, Metronome or Tone Generator function.
|
|
POWER button: |
|
|
|
||
Built-in |
Press |
once to |
|
microphone |
power |
on or off. |
|
BEAT / NOTE Up & Down buttons:
Each click increases/decreases the value one step at a time until the maximum/minimum value is reached (values cycle at end of range).
MT9000ETRONOMEINSTRUCTIONS
METRONOME |
Tempo indicator |
1. Press the POWER button to turn on your MT9000.
2. Slide the TUNER / METRO / TONE switch to METRO (Metronome).
Tempo:
1. Use the TEMPO Up or Down button to select your tempo. The new tempo will appear in the upper right-hand corner of the LCD and the metronome will immediately change to that tempo. The MT9000 gives you two visual cues (LCD & LED) and a wood-block tone.
2. Use the VOLUME wheel to adjust the volume or mute the sound.
Accented Downbeat indicator
Accented Downbeats:
Create an accented downbeat to indicate the beginning of a measure or phrase by pressing the BEAT Up or Down button until the desired Downbeat appears in the upper left-hand corner of the LCD. The downbeat settings are 0-7. The default is 0. The current Downbeat status will be displayed as long as the unit is in metronome mode. The LEDs flash green on the accented beat.
Common Rhythm Figures
Press the BEAT Up or Down button until one of the Rhythm Figures appears, then scroll to the desired figure.
Common Rhythm
Duplet |
Figure indicator |
Triplet
Quadruplet
Triplet with rest
Quadruplet with rests
LCD Example of
Quadruplet with rests at 98 beats-per-minute
TUNER &TONE GENERATOR INSTRUCTIONS
CHROMATICTUNER
1.Press the POWER button to turn on your MT9000.
2.Slide the TUNER / METRO / TONE switch to TUNER (Chromatic Tuner)
3.Using either the ¼” input or built-in microphone, play the note or string you wish to tune. The played note will appear in the upper left hand corner of the LCD.
The MT9000 gives you two visual cues for tuning: LCD needle and LEDs. The left LED flashes yellow when flat, the right flashes red when sharp and both light green when in tune. Adjust your instrument until the needle centers on "0" and both LEDs light green.
Example of a slightly flat E note
Calibrate Chromatic Tuner:
1.Press the CALIB Up or Down button until the desired frequency appears under PITCH in the LCD (example given at right: 442 Hz). The tuner’s scale is now shifted to that pitch. To return the tuner to standard A = 440 Hz, press the CALIB Up or Down button until 440 Hz appears.
TONE GENERATOR
1.Press the POWER button to turn on your MT9000.
2.Slide the TUNER / METRO / TONE switch to TONE (Tone Generator).
3.Use the NOTE Up or Down button to select the note. The Tone Generator range is from A2 to C6.
4.Use the VOLUME wheel to adjust the volume.
Calibrate Tone Generator:
1.Press the PITCH Up or Down button until the desired alternate frequency for A appears under the words PITCH in the LCD (example given at right: 445 Hz). The Tone Generator’s scale is now shifted to that pitch. To return the Tone Generator to standard A = 440 Hz, press the PITCH Up or Down button until 440 Hz appears.
Calibrating the Tuner to A=442 Hz
Calibrating the Tone Generator to A=445MT9000Hz,-OpGuide4C selected-021122-W.pmd - hto
Loading...