Rockwell Automation 1326AB-Bxxxx-x2L User Manual

Read This First

High Resolution 1326AB Series Motors with IP67 Rating

(Catalog Nos: 1326AB-Bxxxx-x2L)

Introduction

Protecting the IP67 Rating and Ensuring Warranty Coverage

Read this publication before rotating the connector housing on an Allen-Bradley

• An absolute high resolution feedback device.

ATTENTION

1326AB motors with an IP67 environmental rating (-x2L suffix) are factory tested to verify sealing to IEC 529 specifications. The IP67 rating (dust tight and protected against water entry at one-meter temporary immersion) is invalidated if the connector housing is removed in the field, whether for purposes of rotating the housing to re-orient the connectors or for any other reason.

1326AB Series Motor equipped with:

High resolution 1326AB motors lose their IP67 rating if the connector housing is removed or rotated in the field.

Motor or component damage caused by or related to the rotation of the connector housing will not be covered under the manufacturer warranty.

ATTENTION

Should an installation require an alternate connector orientation, please contact your local Allen-Bradley representative to order a high resolution 1326AB motor with alternate connector orientation.

1326AB high resolution feedback devices contains ESD (Electrostatic Discharge) sensitive parts and assemblies. Follow static control precautions when you install, test, service, or repair this assembly.

Refer to Allen-Bradley publication 8000-4.5.2, Guarding Against Electrostatic Damage or any other applicable ESD Protection Handbook.

Failure to observe this precaution may result in damage to the equipment.

For more information refer to our web site: For Allen-Bradley Technical Support information refer to:

Allen-Bradley is a registered trademark of Rockwell Automation.

www.ab.com/motion

www.ab.com/support

or Tel: (1) 440.646.5800