Q-See QSD9004, QSDR, QR User Manual

MMYYQQ--SSEEEE DDDDNNSS SSEETTU

P

P

Dynamic Domain Name Service (DDNS) provides the capability for a networked device using the

Internet Protocol Suite to notify a DDNS host to change the active DNS configuration of its

hostnames or addresses. This is a useful feature that your Q

and can be helpful in avoiding any issues that might occur due to frequent or unplanned

changes to your Public/WAN IP address. Enabling DDNS on your Q

you to connect to your device through a DDNS host such a

DVR system

User Manual for this device. Once you have enabled Port Forwarding, you can configu

DDNS information by following these steps:

Using a computer that is connected to the same network as your Q

http://myq

Click on the New User? Link at the bottom of

Complete the registration process by following the on

bottom of your screen (Figure 1

D

D

DVR system

. In order to facilitate

, you must first set up Port Forwarding as directed in the

See

see.com/reg.asp

screen directions and click the

U

GGUUIIDDEE FFOORR QQRR,, QQSSDDRR,, AANNDD QQS

S

99000044 DDVVRRSS

this ability on your Q-See

a.

Browser to go to
b.
c.

[Submit] button at the

-see.com.

(Figure 1)

-See DVR system

-See

s myq-see.com

your page (http://myq-

-

).

is equipped with

will allow

-

DVR, use your IE

re your

).

will ask you t

9) and cannot contain a hyphen. Once you choose your domain name,

click on the [Request Domain] button. This will generate a confirmation screen which

tells you if your Domain name is available and list an I

this is your current IP Address by going to

the same address listed in your confirmation screen (Figure

Once you have completed ste

. Domain names must start with

P address (Figure

and checking that it is

→

d. The next screen

an (a-z) or (0-

(Figure 2)

o create a domain name

e.

3).

www.myipaddress.com

2).

ps a-d, go to the DVR and go to Menu

(Figure 3)

2). Verify that

Network (Figure