PB440TG1
WOOD PELLET GRILL & SMOKER
BARBECUE-FUMOIR À GRANULES DE BOIS
IMPORTANT, READ CAREFULLY, RETAIN FOR FUTURE REFERENCE. MANUAL MUST BE READ BEFORE OPERATING!
IMPORTANT, PRENEZ CONNAISSANCE DE CE DOCUMENT ET CONSERVEZ-LE POUR RÉFÉRENCE ULTÉRIEURE. VOUS DEVEZ LIRE CE GUIDE AVANT D’UTILISER LE BARBECUE !
FOR OUTDOOR AND HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE. RÉSERVÉ À L'USAGE EXTÉRIEUR ET RÉSIDENTIEL UNIQUEMENT. NON DESTINÉ À UN USAGE COMMERCIAL.
TAILGATING &
TRAVEL POSITION
POSITION D'ACCROCHAGE
ET DE VOYAGE
MODEL / MODÈLE : PB440TG1 PART / PIÈCE : 72445, 72448
5005166
UL SUB.2728
PATIO POSITION
POSITION
DU PATIO
INSTRUCTIONS AND RECIPES | INSTRUCTIONS ET RECETTES
WARNING: Please read the entire manual before installation and use of this electric, pellet fuel burning appliance. Failure to follow these instructions could result in property damage, bodily injury or even death. Contact local building or fire officials about restrictions and installation inspection requirements in your area.
AVERTISSEMENT : Veuillez lire l'intégralité du manuel avant l'installation et l'utilisation de cet appareil électrique, à granules. Ne pas suivre ces instructions peut entraîner des dégâts matériels ou des blessures corporelles graves pouvant aller jusqu'à la mort. Contactez les responsables locaux de la construction ou des incendies au sujet des restrictions et des exigences d'inspection de l'installation dans votre région.
RECIPES |
INCLUDED |
||
|
INCLUSES |
||
RECETTES |
|||
|
ENGLISH
SAFETY INFORMATION
MAJOR CAUSES OF APPLIANCE FIRES ARE A RESULT OF POOR MAINTENANCE AND A FAILURE TO MAINTAIN REQUIRED CLEARANCE TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE USED ONLY IN ACCORDANCE TO THE FOLLOWING INSTRUCTIONS.
Please read and understand this entire manual before attempting to assemble, operate or install the product. This will ensure you receive the most enjoyable and trouble-free operation of your new wood pellet grill. We also advise you retain this manual for future reference.
DANGERS AND WARNINGS
You must contact your local home association, building or fire officials, or authority having jurisdiction, to obtain the necessary permits, mission or information on any installation restrictions, such as any grill being installed on a combustible surface, inspection requirements or even ability to use, in your area.
1.A minimum clearance of 305mm (12 inches) from combustible constructions to the sides of the grill, and 305mm (12 inches) from the back of the grill to combustible constructions must be maintained. Do not install appliance on combustible floors, or floors protected with combustible surfaces unless proper permits and permissions are obtained by authorities having jurisdiction. Do not use this appliance indoors or in an enclosed, unventilated area. This wood pellet appliance must not be placed under overhead combustible ceiling or overhang. Keep your grill in an area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
Should a grease fire occur, turn the grill OFF and leave the lid closed until the fire is out. Do not unplug the power cord. Do not throw water on the unit. Do not try to smother the fire. Use of an all-class (class ABC) approved fire extinguisher is valuable to keep on site. If an uncontrolled fire does occur, call the Fire Department.
2.Keep electrical supply cords and the fuel away from heated surfaces. Do not use your grill in the rain or around any water source.
3.After a period of storage, or non-use, check the fire pot for obstructions, the hopper for foreign objects, and any air blockage around the fan intake or rear barrel exhaust holes. Clean before use. Regular care and maintenance is required to prolong the lifespan of your unit. If the grill is stored outside during the rainy season or seasons of high humidity, care should be taken to insure that water does not get into the hopper. When wet or exposed to high humidity, wood pellets will expand greatly, decompose, and may jam the feed system. Always disconnect the power, before performing any service or maintenance.
Do not transport your grill while in use or while the grill is hot. Ensure the fire is completely out and that the grill is completely cool to the touch before moving.
4.It is recommended to use heat-resistant barbecue mitts or gloves when operating the grill. Do not use accessories not specified for use with this appliance. Do not put a barbecue cover or anything flammable in the storage space area under the barbecue.
5.To prevent fingers, clothing or other objects from coming in contact with the auger feed system, the appliance is equipped with a metal safety screen, mounted to the interior of the hopper. This screen must not be removed unless directed by Customer Service or an authorized dealer.
This appliance is not recommended for children, persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are under direct supervision or instruction by a person responsible for their safety.
6. Parts of the barbecue may be very hot, and serious injury may occur. Keep young children and pets away while in use.
2
7.Do not enlarge igniter holes or fire pots. Failure to follow this warning could lead to a fire hazard and bodily harm and will void your warranty.
8.Product may have sharp edges or points. Contact may result in injury. Handle with care.
DISPOSAL OF ASHES
Ashes should be placed in a metal container with a tight-fitting lid. The closed container of ashes should be placed on a noncombustible floor or on the ground, well away from all combustible materials, pending final disposal. When ashes are disposed by burial in soil, or otherwise locally dispersed, they should be retained in a closed container until all cinders have thoroughly cooled.
WOOD PELLET FUEL
This pellet cooking appliance is designed and approved for pelletized, all natural, wood fuel only. Any other type of fuel burned in this appliance will void the warranty and safety listing. You must only use all natural wood pellets, designed for burning in pellet barbecue grills. Do not use fuel with additives.
Do not use spirit, petrol, gasoline, lighter-fluid or kerosene for lighting or refreshing a fire in your grill. Keep all such liquids well away from the appliance when in use.
At this time of printing, there is no industry standard for barbecue wood pellets, although most pellet mills use the same standards to make wood pellets for domestic use. Further information, can be found at www.pelletheat.org or the Pellet Fuel Institute.
Contact your local dealer on the quality of pellets in your area, and for information on brand quality. As there is no control over the quality of pellets used, we assume no responsibility to damage caused by poor quality of fuel.
CREOSOTE
Creosote, or soot, is a tar-like substance. When burning, it produces black smoke with a residue which is also black in color. Soot or creosote is formed when the appliance is operated incorrectly, such as: blockage of the combustion fan, failure to clean and maintain the burn area, or poor air-to-fuel combustion.
It is dangerous to operate this appliance should the flame become dark, sooty, or if the fire pot is overfilled with pellets. When ignited, this creosote makes an extremely hot and uncontrolled fire, similar to a grease fire. Should this happen, turn the unit OFF, let it cool completely, then inspect for maintenance and cleaning. It commonly accumulates along exhaust areas.
If creosote has formed within the unit; allow the unit to warm up at a low temperature, turn off the appliance, then wipe away any formation with a hand towel. Similar to tar, it is much easier to clean when warm, as it becomes liquid.
CARBON MONOXIDE (“the silent killer”)
Carbon monoxide is a colorless, odorless, tasteless gas produced by burning gas, wood, propane, charcoal or other fuel. Carbon monoxide reduces the blood’s ability to carry oxygen. Low blood oxygen levels can result in headaches, dizziness, weakness, nausea, vomiting, sleepiness, confusion, loss of consciousness or death. Follow these guidelines to prevent this colorless, odorless gas from poisoning you, your family, or others:
•See a doctor if you or others develop cold or flu-like symptoms while cooking or in the vicinity of the appliance. Carbon monoxide poisoning, which can easily be mistaken for a cold or flu, is often detected too late.
•Alcohol consumption and drug use increase the effects of carbon monoxide poisoning.
Carbon monoxide is especially toxic to mother and child during pregnancy, infants, the elderly, smokers, and people with blood or circulatory system problems, such as anemia, or heart disease.
SAFETY LISTING
In accordance with the procedures and specifications listed in the UL SUBJECT 2728-2009 "pellet fuel cooking appliances" and ULC/ORD C272 and CANADIAN CSA C22.2 #3 "for electrical features of fuel burning equipment." Pit Boss Grills pellet cooking appliances have been independently tested and listed by INTERTEK (an accredited testing laboratory) to ETL, UL, ULC and CSA standards.
ENGLISH
3
ENGLISH
COPYRIGHT NOTICE
Copyright 2018. All right reserved. No part of this manual may be copied, transmitted, transcribed, stored in a retrieval system, in any form or by any means without expressed written permission of,
Dansons Inc.
3411 North 5th Avenue, Suite 500, Phoenix, AZ, USA 85013 sales@pitboss-grills.com | service@pitboss-grills.com www.pitboss-grills.com
Toll-Free: 1-877-303-3134, Fax: 1-877-303-3135
4
TABLE OF CONTENTS
Safety Information ........................................................... |
2 |
Parts & Specs...................................................................... |
6 |
Assembly Preparation...................................................... |
7 |
Assembly Instructions |
|
Expanding The Cart Base............................................................ |
7 |
Mounting The Wheels To The Legs .......................................... |
7 |
Securing The Lid Stopper ........................................................... |
8 |
Installing The Hopper To The Barrel ........................................ |
8 |
Assembling The Handles............................................................. |
8 |
Installing the Thermometer....................................................... |
9 |
Placing The Grease Bucket.......................................................... |
9 |
Installing The Cooking Components ....................................... |
9 |
Connecting To A Power Source................................................ |
10 |
Operating Instructions |
|
Grill Environment........................................................................ |
10 |
Grill Temperature Ranges........................................................... |
11 |
Understanding The Temperature Probe ................................ |
12 |
Tailgating and Travel Position................................................... |
12 |
Understanding The Control Board........................................... |
13 |
Understanding The "P" Setting............................................... |
14 |
Hopper Priming Procedure...................................................... |
14 |
First Use – Grill Burn-Off........................................................... |
15 |
Preheating..................................................................................... |
15 |
Automatic Start-Up Procedure................................................ |
15 |
Manual Start-Up Procedure..................................................... |
16 |
Shutting Off Your Grill............................................................... |
16 |
Care & Maintenance......................................................... |
16 |
Using Wood Pellet Fuel.................................................. |
18 |
Cooking Guidelines.......................................................... |
18 |
Tips & Techniques............................................................ |
20 |
Troubleshooting ............................................................... |
21 |
Electrical Wire Diagram.................................................. |
23 |
Replacement Parts |
|
Grill Replacement Parts ............................................................ |
24 |
Hopper Replacement Parts...................................................... |
25 |
Warranty |
|
Conditions..................................................................................... |
25 |
Exceptions.................................................................................... |
26 |
Ordering Replacement Parts.................................................... |
26 |
Contact Customer Service......................................................... |
26 |
Warranty Service ........................................................................ |
26 |
Accessories Sold Separately.......................................... |
27 |
Recipes............................................................................... |
28 |
ENGLISH
5
ENGLISH
PARTS & SPECS
Part# Description
1 Porcelain-Coated Steel Upper Cooking Rack
2Porcelain-Coated Steel Cooking Grids (x2)
3Thermometer Kit
4Lid Stopper
5Power Cord Bracket
6Probe Wire Casing
7Flame Broiler Slider
8Flame Broiler Main Plate
9Hopper Assembly, Drop Chute Plate and Screw
10 Handle Bezel (x4)
11 Lid Handle, Barrel Handle (x2)
12 Main Barrel
13 Grease Bucket
14 Wheel (x2) A Screw (x4) B Washer (x4)
C Locking Washer (x4) D Wheel Cotter Pin (x2) E Wheel Washer (x2)
F Wheel Axle Pin (x2)
NOTE: Due to ongoing product development, parts are subject to change without notice. Contact Customer Service if parts are missing when assembling the unit.
PB – ELECTRIC REQUIREMENTS
110-120V, 3.3AMP, 60HZ, 275W, 3-PRONG GROUNDED PLUG
1
2
5
6 |
7 |
3 |
|
|
9
10
11
12
13
14
A D
B E
C F
4
8
MODEL |
UNIT ASSEMBLED (WxHxD) |
UNIT WEIGHT |
COOKING AREA |
TEMP. RANGE |
DIGITAL FEATURES |
||
|
|
1,011mm x 1,029mm x 564mm |
40.1 kg |
Main - 2,200 cm² / 341 sq. in. |
82-260°C |
Eight temperature |
|
PB |
|
presets, start-up and |
|||||
PB440TG1 |
Upper Rack - 800 cm² / 124 sq. in. |
||||||
/ 39.8” x 40.5” x 22.2” |
/ 88.4 lb |
/ 180-500°F |
cool-down cycles, |
||||
TOTAL - 3,300 cm² / 465 sq. in. |
|||||||
|
|
|
|
|
electric igniter |
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
6
ASSEMBLY PREPARATION
Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister pack after removing from the protective shipping carton. Before assembly of product, review all parts and reference the parts list. If any part is missing or damaged, do not attempt to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss Customer Service for parts: Monday through Sunday, 4am - 8pm PST (EN/FR/ES).
service@pitboss-grills.com | Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
IMPORTANT: To ease installation, using two people is helpful (but not necessary) when assembling this unit.
Tools required for assembly: screwdriver and level. Tools not included.
ASSEMBLY INSTRUCTIONS
NOTE: For all of the following steps, do not tighten any screws completely until all screws for that step have been installed. Once all screws have been installed, then tighten them securely.
1. EXPANDING THE CART BASE
Parts Required:
1 x Main Barrel (#12)
Installation:
•Place a piece of cardboard on the floor to prevent scratching the unit. Lay the main barrel on its back on the cardboard, lid facing upward. Open the right side of the cart first by pressing down firmly on the right folding bar (A), then swing open the right side cart legs. Once the legs are extended, the right folding bar will spring back into the locked position. Ensure the diagonal support bar extends completely and locks into a brace position, then tighten the two folding bar knobs. Note illustration 1A.
•Next, open the left side of the cart by press down firmly on the left folding bar (to unlock) and pull out the left side cart legs until extended. Once open, the left folding bar will spring back into the locked position. Note illustration 1B.
IMPORTANT: The folding bar on each pair of cart legs should always be in a locking position (raised up) when the grill is in use.
2. MOUNTING THE WHEELS TO THE LEGS
Parts Required:
2 |
x |
Wheel (#14) |
2 |
x Wheel Cotter Pin (xD) |
|
2 |
x |
Wheel Washer (xE) |
2 |
x Wheel Axle Pin (xF) |
Installation:
•Attach the wheel to the leg by inserting the wheel axle pin through the wheel, then the leg hole, wheel washer, and finally secure using the wheel cotter pin. Note illustration for order. Repeat installation for the other wheel.
Once installed, from the rear of the grill, lift the grill into an upright position.
1A |
A |
B |
C |
1B |
2 |
ENGLISH
7
ENGLISH
3. SECURING THE LID STOPPER
Parts Required:
1 |
x Lid Stopper (#4) |
Installation:
•Secure the lid stopper onto the top of the main barrel using the pre-installed screw on the top of the main barrel.
4.INSTALLING THE HOPPER TO THE BARREL
Parts Required:
1 |
x Hopper Assembly, Drop Chute Plate and Screw (#9) |
|
1 |
x Probe Wire Casing (#6) |
|
4 |
x |
Screw (#A) |
4 |
x |
Locking Washer (#B) |
4 |
x |
Washer (#C) |
1 |
x Power Cord Bracket (#5) |
Installation:
•Secure the drop chute screw to the drop chute plate, and insert into the horizontal slit on the rear side of the hopper.
•Align the fire pot end of the hopper assembly into the opening on the end of the main barrel. Insert only half-way, then carefully slide the hopper assembly completely into the opening on the end of the main barrel. Secure the hopper assembly to the main barrel, from the inside of the barrel, using four screws, locking washers, and washers. Take care not to over-tighten to avoid stripping the screws. Note illustration 4A.
•On the rear side of the hopper, connect the silver grill probe temperature wires – extruding from the main barrel – to the wire connections from the rear of the hopper assembly. Remove the two pre-mounted screws. Tuck the excess wire into the probe wire casing, placing the wire distinctly in the divet along the edge to avoid pinching. Next, secure the probe wire casing to the hopper using the two screws previously removed. Note illustration 4B.
IMPORTANT: Ensure the grill probe temperature wires do not get pinched. Damage to the grill probe temperatures wires may result in incorrect readings, or inability to funtion.
•Secure the power cord bracket using the two screws pre-installed on the rear side of the hopper, above the drop chute plate. Note illustration 4C.
5.ASSEMBLING THE HANDLES
Parts Required:
1x Lid Handle (#11)
2x Barrel Handle (#11)
4 x Handle Bezel (#10)
Installation:
•Remove the pre-installed screws from the lid handle. From inside the barrel lid, insert one screw to protrude to the outside. Add a bezel on the screw, then hand-tighten the screw (from the inside) into the lid handle. Repeat for the other side. Note illustration 5A.
3 |
|
|
4A |
|
|
|
|
REAR VIEW |
A |
C |
B |
4B |
|
|
4C |
|
|
5A |
|
|
8
•On the non-hopper side of the main barrel, repeat same installation for the barrel handle. Note illustration 5B.
NOTE: Use the barrel handle to move the grill when the unit is expanded into its full, upright position.
6. INSTALLING THE THERMOMETER
Parts Required:
1 |
x Thermometer Kit (#3) |
Installation:
•Remove the pre-installed nut from the thermometer. Insert the thermometer into the hole provided on the top of the lid on the main barrel, then secure by re-installing the nut from the inside. Rotate the thermometer so the text is level and upright.
NOTE: If rotation is askew, this will result in incorrect readings.
7. PLACING THE GREASE BUCKET
Parts Required:
1 |
x Grease Bucket (#13) |
Installation:
•Place the grease bucket on the spout hook on the end of the main barrel. Ensure it is level to avoid grease spills.
8.INSTALLING THE COOKING COMPONENTS
Parts Required:
2 |
x |
Cooking Grids (#2) |
1 |
x Upper Cooking Rack (#1) |
|
1 |
x Flame Broiler Main Plate (#8) |
|
1 |
x |
Flame Broiler Slider (#7) |
Installation:
•Insert the flame broiler main plate into the main grill. Rest the flame broiler main plate on the built-in ledge (on the inside right) of the main grill that directs grease towards the grease bucket. Slide the entire piece to the left side, and the two slots on the flame broiler main plate will fit into the rounded ledge above the fire pot. It will sit slightly at a downward angle. Note illustration 8A.
NOTE: If the main plate is on the base of the barrel, it is installed incorrectly.
•Place the flame broiler slider on top of the flame broiler main plate, covering the slotted openings. Ensure the raised tab is on the left, to easily adjust for direct or indirect flame when cooking. Note illustration 8B. Both flame broiler parts are lightly coated with oil to avoid rusting when shipped.
NOTE: When the flame broiler slider is open, and direct flame is used while cooking, do not leave the grill unattended for any period of time.
•Place the cooking grids, side-by-side, on the grid ledge inside the main grill.
•The unit is now completely assembled.
NOTE: To maintain the searing and grilling performance of your cooking grids, regular care and maintenance Is required.
5B
6
7
8A
8B
ENGLISH
9
ENGLISH
9. CONNECTING TO A POWER SOURCE |
|
9 |
NOTE: Before plugging your Pit Boss into any electrical outlet, ensure the temperature dial is in the OFF position.
•STANDARD OUTLET
This appliance requires 110 volt, 60hz, 275w, 5 amp service. It must be a 3-prong grounded plug. Ensure grounded end is not broken off before use. The control uses a 5 amp, 120 volt, fast-blow fuse to protect the board from the igniter.
•GFCI OUTLETS
This appliance will work on most GFCI outlets, with a recommended size of 15 amp service. If your GFCI outlet is highly sensitive to power surges, it will likely trip during the start-up phase of operation. During the start-up phase, the igniter draws 200-700 watts of electricity which can be too much power for a GFCI outlet to handle. Each time it trips, it increases in sensitivity. If the GFCI keeps tripping, replace the outlet or change to a non-GFCI outlet.
•ON THE ROAD
Disconnect the igniter from the main wiring harness. Use the manual start-up procedure. A Pit Boss unit can operate using a 12 volt, 100 watt inverter plugged into your automobile outlet. To use the automatic igniter, it is recommended to use a minimum of a 1000 watt inverter.
IMPORTANT: Disconnect unit from power source when not in use.
FAST-BLOW FUSE, 5 AMP
OPERATING INSTRUCTIONS
With today’s lifestyle of striving to eat healthy and nutritious foods, one factor to consider is the importance of reducing fat intake. One of the best ways to cut down on fat in your diet is to use a low fat method of cooking, such as grilling. As a pellet grill uses natural wood pellets, the savory wood flavor is cooked into the meats, reducing the need for high sugar content sauces.
Throughout this manual, you will notice the emphasis on grilling food slowly at LOW or MEDIUM temperature settings.
GRILL ENVIRONMENT
1. WHERE TO SET-UP THE GRILL
With all outdoor appliances, outside weather conditions play a big part in the performance of your grill and the cooking time needed to perfect your meals. The Pit Boss, because of its single wall construction, should be considered as a 2 to 3 season grill, depending on where you live.
All Pit Boss units should keep a minimum clearance of 305mm (12 inches) from combustible constructions, and this clearance must be maintained while the grill is operational. This appliance must not be placed under overhead combustible ceiling or overhang. Keep your grill in an area clear from combustible materials, gasoline and other flammable vapors and liquids.
2. COLD WEATHER COOKING
As it becomes cooler outside, that does not mean that grilling season is over! The crisp cool air and heavenly aroma of smoked foods will help cure your winter blues.
Follow these suggestions on how to enjoy your grill throughout the cooler months:
•If smoking at low temperatures fails, increase the temperature slightly to achieve the same results.
•Organize – Get everything you require ready in the kitchen before you head outdoors. During the winter, move your grill to an area that is out of the wind and direct cold. Check local bylaws regarding the proximity of your grill in
10
relation to your home and/or other structures. Put everything you need on a tray, bundle up tight, and get it done!
•To help keep track of the outside temperature, place an outdoor thermometer close to your cooking area. Keep a log or history of what you cooked, the outdoor temperature, and the cooking time. This will help later down the road to help you determine what to cook and how long it will take.
•In very cold weather, increase your preheating time by at least 20 minutes.
•Avoid lifting the lid any more than necessary. Cold gusts of wind can completely cool your grill temperature. Be flexible with your serving time; add about 10 – 15 minutes extra cooking time each time you open the lid.
•Have a heated platter or a dish cover ready to keep your food warm while making the trip back inside.
•Ideal foods for winter cooking are those that require little attention, such as roasts, whole chickens, ribs, and turkey. Make your meal preparation even easier by adding simple items such as vegetables and potatoes.
3.HOT WEATHER COOKING
As it becomes warmer outdoors, the cooking time will decrease. Proper dress is important when it gets really hot: shorts, shirt, shoes, hat, apron and a generous slab of suntan lotion is recommended.
Follow these few suggestions on how to enjoy your grill throughout the hot months:
•Adjust your cooking temperatures downward. This helps to avoid unwanted flare-ups.
•Use a meat thermometer to determine the internal temperature of your foods. This helps in preventing your meat from over cooking and drying out.
•Even in hot weather it is still better to cook with the lid of your grill down.
•You can keep foods hot by wrapping them in foil, and placing them in an insulated cooler. Stuff crumpled up newspaper around the foil and this will keep food hot for 3 to 4 hours.
GRILL TEMPERATURE RANGES
Temperature readouts on the control board may not exactly match the thermometer. All temperatures listed below are approximate and are affected by the following factors: outside ambient temperature, the amount and direction of wind, the quality of pellet fuel being used, the lid being opened, and the quantity of food being cooked.
•HIGH TEMPERATURE (205-315°C / 401-599°F)
This range is best used to sear and grill at a high heat. Use in tandem with the flame broiler (slide plate) for indirect or direct flame cooking. With the flame broiler open, direct flame is used to create those “blue” steaks, as well as flamekissed vegetables, garlic toast or s’mores! When the flame broiler is closed, the air circulates around the barrel, resulting in convection heat. High temperature is also used to preheat your grill, burn-off the cooking grids, and to achieve high heat in extreme cold weather conditions.
•MEDIUM TEMPERATURE (135-180°C / 275-356°F)
This range is best for baking, roasting, and finishing off that slow smoked creation. Cooking at these temperatures will greatly reduce the chances of a grease flare-up. Ensure that the flame broiler slider in the closed position, covering the slotted openings. Great range for cooking anything wrapped in bacon, or where you want versatility with control.
•LOW TEMPERATURE (80-125°C / 176-257°F)
This range is used to slow roast, increase smoky flavor, and to keep foods warm. Infuse more smoke flavor and keep your meats juicy by cooking longer at a lower temperature (also known as low and slow). Highly recommended for the big turkey at Thanksgiving, juicy ham at Easter, or the huge holiday feast.
Smoking is a variation on true barbecuing and is truly the main advantage of grilling on a wood pellet grill. Hot smoking, another name for low and slow cooking, is generally done between 80-125oC / 176-257oF. Hot smoking works best when longer cooking time is required, such as large cuts of meats, fish, or poultry.
TIP: To intensify that savory flavor, switch to SMOKE (low) temperature range immediately after putting your food on the grill. This allows the smoke to penetrate the meats.
The key is to experiment with the length of time you allow for smoking, before the meal is finished cooking. Some outdoor chefs prefer to smoke at the end of a cook, allowing the food to keep warm until ready to serve. Practice makes perfect!
ENGLISH
11
ENGLISH
UNDERSTANDING THE TEMPERATURE PROBE
Located inside the main barrel is the temperature probe. It is a small, vertical piece of stainless steel. The temperature probe measures the internal temperature of the unit. When the temperature is adjusted on the Control Board, the temperature probe will read the actual temperature inside the unit and adjust to the desired temperature.
IMPORTANT: The temperature of your unit is highly affected on ambient outdoor weather, quality of pellets used, flavor of pellets, and the quantity of food being cooked.
TAILGATING AND TRAVEL POSITION
Collapsing your grill into the travel and tailgating position allows the grill to be used in very limited space and can easily tuck away for storage. Built with its own carrying handle, you just became a griller-on-the-go! Get fired up for the game, enjoy a weekend away, or start grilling on your home patio; there is always good reason for a quick and easy meal with your grill!
|
HOW TO COLLAPSE (A-B-C-D) |
|
|
1. |
Ensure the unit is unplugged, and the grease bucket is removed. Remove the |
|
|
cooking components from inside the main barrel, and place aside. |
|
|
NOTE: It is recommended to have the hopper empty, or near empty, to avoid |
|
|
spilling pellets when the unit is changing positions. |
|
2. |
Holding the handle on the end of the hopper, press down firmly on the left folding |
|
|
bar (to unlock) and fold in the legs with wheels. As the legs tuck beneath the main |
|
|
barrel, carefully rest the unit on the floor in a triangular position. |
A |
3. |
Next, holding the handle on the barrel end, unscrew the two folding bar knobs. |
|
Press down firmly on the right folding bar (to unlock), and push in the stationary |
|
|
|
|
|
|
legs to tuck beneath the main barrel. |
|
4. |
Replace the cooking components inside the main barrel, and replace the grease |
|
|
bucket on the spout hook. The grill is now ready for tailgating! |
HOW TO EXPAND (D-C-B-A)
|
1. |
Ensure the unit is unplugged, and the grease bucket is removed. Remove the |
|
|
|
|
cooking components from inside the main barrel, and place aside. |
|
B |
NOTE: It is recommended to have the hopper empty, or near empty, to avoid |
|
|
|
|
spilling pellets when the unit is changing positions. |
|
2. |
Holding the handle on the barrel end, tip the unit almost vertical to press down |
|
|
|
|
firmly on the right folding bar (to unlock) and pull out the stationary legs. Once the |
|
|
|
legs are extended, the right folding bar will spring back into the locked position. |
|
|
|
Ensure the diagonal support bar extends and locks into a brace position, then |
|
|
|
tighten the two folding bar knobs. Rest the unit in a triangular position. |
|
3. |
Next, holding the handle on the end of the hopper, carefully lift the hopper side of |
|
|
|
|
the unit, and pivot the grill away from you. Squat down and press down firmly on |
|
|
|
the left folding bar (to unlock) and pull out the legs with wheels until extended. |
C |
4. |
Replace the cooking components inside the main barrel, and replace the grease |
|
|
|
|
bucket on the spout hook. The grill is now ready for use! |
|
|
|
NOTE: Another way to expand the unit is to carefully tip the grill backwards |
|
|
|
so it lies on its back side – mind that the lid of the main barrel does not swing |
|
|
|
open. Expand using same details as above. Then, from the rear of the grill, |
|
|
|
lift the grill into an upright position. |
|
|
|
|
|
|
IMPORTANT: Unless the unit is changing positions, the folding bar should remain |
|
D |
|
in the locking position (raised up). |
12
UNDERSTANDING THE CONTROL BOARD
“P” SET |
ACTUAL ˚F |
SET
|
300 |
“P” SET |
|
250 |
350 |
||
|
|||
225 |
|
400 |
|
200 |
|
450 |
|
Smoke |
|
475 |
|
Off |
|
High |
WWW.PITBOSS-GRILLS.COM
FEATURE DESCRIPTION
The Temperature Control Dial allows you to set your desired smoking temperature. Rotate the knob to select from Smoke, any of the eight temperature presets, or High.
The Off Setting on the Temperature Control Dial is Off the off mode for the unit. The unit will not function
on this setting.
The Smoke Setting on the Temperature Control
Smoke Dial is the start-up mode for the unit. The grill operates at the lowest temperature, without the
fire going out.
The High Setting on the Temperature Control
High Dial is the highest heat level for the unit. The grill operates at the highest temperature. When
the lid is open, the grill will run at this speed to compensate for the loss of heat in the barrel.
|
The LEDScreen is used as the information center for |
|
“P” SET ACTUAL ˚F |
||
SET |
your unit. The LED screen will display your desired |
|
cook temperature (SET), actual cook temperature |
||
|
||
|
(ACTUAL), and the "P" setting selected ("P" SET). |
|
|
||
|
See Troubleshooting for more information on |
|
|
error codes. |
READOUT DESCRIPTION
888Displays once connected to AC power.
Flashing |
Grill temperature is below 66˚C |
|
/ 150˚F. |
Flashing • • • |
Indicates the igniter is on. |
|
“P” SET |
|
"P" SET |
Indicates the current "P" setting |
|
|
|
|
|
selected. |
|
|
|
|
SET |
Indicates the desired cooking |
|
|
|
|
|||
|
SET |
|
|||
|
|
|
temperature. |
|
|
|
|
|
ErH |
The grill has overheated. |
|
|
|
|
|
|
|
|
|
|
ErR |
Temperature probe wire not |
|
|
|
|
|
connecting. |
|
|
|
|
ErP |
Power interruption while in |
|
|
|
|
|
operation. |
|
|
|
|
|
|
|
“P” SET |
The "P" SET Button is used to select one of the |
||||
eight temperature fine tunings. Use this feature |
|||||
|
|
|
to change the "P" setting to accommodate to |
||
|
|
|
your cooking style and cooking environment, as |
||
|
|
|
preferred. With a short push of the recessed button, |
||
|
|
|
the setting increases from P0 to P7, then repeats. |
||
|
|
|
Adjustments are best made when the Temperature |
||
|
|
|
Control Dial is set to Smoke, which allows for |
||
|
|
|
manual control of the pellet feed system. Default |
||
|
|
|
setting is "P4". |
|
|
ENGLISH
13
ENGLISH
UNDERSTANDING THE "P" SETTING
The main benefit to the "P" SET (setting) button is that it allows the cook to have fine tuned control of their grill to compensate for ambient temperature, humidity, wind, environmental changes, pellet fuel type and quality.
When the recessed "P" SET button is pushed, the “P” setting displayed on the LCD screen will flash and change to the next value (upward). Once P7 is reached, it will restart at P0. There are eight “P” settings, ranging from P0 to P7. The recessed "P" SET button can be pushed using a thin-tipped object, such as a pen tip, toothpick, kabob skewer, or screwdriver.
IMPORTANT: Do not push the "P" SET button too hard, as this may cause damage. Only a light push is needed.
|
AUGER CYCLE (seconds) |
|
"P" SET |
ON |
OFF |
P0 |
18 |
55 |
P1 |
18 |
70 |
P2 |
18 |
85 |
P3 |
18 |
100 |
*P4 |
18 |
115 |
P5 |
18 |
130 |
P6 |
18 |
140 |
P7 |
18 |
150 |
*default setting
1. USING THE "P" SETTING IN SMOKE MODE
Anytime the temperature dial is set to SMOKE, such as the start-up cycle, the auger will run on more of a manual mode of cooking versus using one of the preset dial temperatures.
First, the auger will continuously turn and feed pellets for four minutes. After four minutes, the auger begins to run a feed cycle based on the "P' setting selected on the Digital Control Board. The default setting is P4.
•MORE SMOKE FLAVOR, LESS HEAT (↑ “P” SETTING / ↓ FUEL FEED)
When hot smoking – increasing the infusion of more natural wood flavor – increase the "P" setting to allow for longer cycles between auger feeds. This results in keeping a lower temperature output, which increases cook time (also known as low and slow). This results in a deeper smoke ring and more smoke flavor. Care must be taken when using the higher "P" settings, such as P6 or P7, as this could result in the fire going out in the fire pot.
•LESS SMOKE FLAVOR, MORE HEAT (↓ “P” SETTING / ↑ FUEL FEED)
A lower "P" setting will result in a higher grill temperature output and higher pellet consumption due to more frequent cycles.
IMPORTANT: When selecting a SMOKE setting after a temperature dial preset (such as preheating at high heat), the auger will continuously turn and feed pellets for four minutes. This will momentarily raise the temperature, but temperature will decrease and stabilize once the "P" setting cycle begins (approximately five to ten minutes).
2. USING THE "P" SETTING WITH A TEMPERATURE DIAL PRESET
Anytime the temperature dial is set to one of the temperature dial presets (95-245°C / 200-475°F), the auger will run on a controlled setting of pellet feeding to maintain the preset temperature selected.
Once the grill has preheated on SMOKE, select the desired temperature using the temperature dial presets. The auger will begin to run continuously until the desired preset temperature is reached. Once reached, the auger will run a feed cycle based on the "P' setting selected on the Digital Control Board, aiming to hold at the preset temperature selected.
NOTE: When using a temperature dial preset, lowering the "P" setting, such as P1, will decrease large fluctuations in temperature. Similar to a campfire, fueling the fire pot (fire) more frequently will result in less heat fluctuation.
HOPPER PRIMING PROCEDURE
These instructions should be followed the first time the grill is ignited, and each time the grill runs out of pellets in the hopper:
1.Remove all cooking components from the interior of the grill.
2.Open the hopper lid. Make sure there are no foreign objects in the auger or hopper.
3.With the Temperature Control Dial to the Off position, plug the power cord into a power source.
4.Turn the Temperature Control Dial to the Smoke position. Check the following items:
•That the auger is turning. Do not place fingers or objects in the auger tube. This can cause injury.
•Place your hand above the fire pot and feel for air movement. Do not place your hand or fingers inside the fire pot. This can cause injury.
•After approximately a minute, you should smell the igniter burn off and begin to feel the air getting warmer. The igniter tip does not glow red hot. Do not touch the igniter. This item gets extremely hot and will burn.
14
5.Turn the Temperature Control Dial to Off.
6.Fill the hopper with all natural barbecue wood pellets.
7.Turn the Temperature Control Dial to Smoke. Wait approximately 3 minutes for the pellets to start dropping into the fire pot from the auger tube. Once pellets begin to drop into the fire pot, turn the Temperature Control Dial to Off.
8.After grill has cooled, re-install the cooking components into grill. The grill is now ready to use.
FIRST USE – GRILL BURN-OFF
Once your hopper has been primed and before cooking on your grill for the first time, it is important to complete a grill burn-off. Start the grill and operate at high heat (over 233°C / 451°F) with the lid down for 30 to 40 minutes to burn-off the grill and rid it of any foreign matter.
PREHEATING
It is important to allow your grill to preheat before every cook session. This allows the grill and cooking grids to heat up quicker, kill off bacteria and other pathogens leftover from past grill sessions, and the grill is then able to maintain its cooking temperature once your food is placed in the cooking area. Preheat with the lid closed.
IMPORTANT: The outside ambient temperature, weather conditions, and quality of wood pellets will all affect your cooking temperature. Observe the time it takes to reach your desired temperature, and adjust your cooking time as needed.
AUTOMATIC START-UP PROCEDURE
1.Ensure the Temperature Control Dial is in the Off position. Plug the power cord into a grounded power source.
2.Check fire pot to ensure there is no obstruction for proper ignition. Open the hopper lid. Ensure there are no foreign objects in the hopper or auger feed system. Fill hopper with dry, barbecue hardwood pellets.
3.Open the barrel lid. The lid must remain open during the start-up cycle.
4.Turn the Temperature Control Dial to Smoke. This will activate the start-up cycle. The auger feed system will begin to turn, the igniter will begin to glow and the fan will supply air to the fire pot. The grill will produce smoke while the startup cycle is taking place. The pellets will have ignited once the smoke has cleared. To confirm the start-up cycle has begun properly, listen for a torchy roar, and notice some heat being produced.
5.Preheat your grill. Close the lid. Turn the Temperature Control Dial to 177°C / 350°F, to allow the unit to preheat for approximately 15 to 20 minutes.
6.After preheating is complete, you are ready to enjoy your grill!
IMPORTANT: When selecting a Smoke setting after a Temperature Control Dial preset (such as preheating at high heat), the auger will continuously turn and feed pellets for four minutes. This will momentarily raise the temperature, but temperature will decrease and stabilize once the "P" setting cycle begins (approximately five to ten minutes).
IGNITER FAILURE PROCEDURE
If for any reason your electric igniter fails, check the following steps, or start your grill using the manual method.
1.Turn the Temperature Control Dial to the Off position. Open the lid. Remove the cooking components from the grill. Remove all unburnt pellets and ash from the fire pot. Avoid touching the igniter to avoid injury, as it will be extremely hot.
2.Once all parts are removed and cleaned, turn the Temperature Control Dial to Smoke. Check the following:
•Visually confirm that the igniter is working by placing your hand above the fire pot and feeling for heat.
•Visually confirm that the igniter is protruding approximately 13mm / 0.5 inches in the fire pot.
•Visually confirm that the auger is dropping pellets into the fire pot.
•Confirm that the combustion fan is working by listening for it.
3.If any of the above points are not working, follow Troubleshooting instructions.
ENGLISH
15
MANUAL START-UP PROCEDURE
ENGLISH
1.Ensure the Temperature Control Dial to the Off position. Plug the power cord into a grounded power source.
2.Open the hopper lid. Ensure there are no foreign objects in the hopper or auger feed system. Fill hopper with dry, all natural hardwood barbecue pellets.
3.Open the barrel lid. Remove the cooking components to expose the fire pot. Check fire pot to ensure there is no obstruction for proper ignition. Place a generous handful of pellets into the fire pot. Squirt a gelled fire starter, or other appropriate pellet starter, over the top of the pellets. A small amount of solid fuel fire starter, such as one composed of sawdust and wax, or wood shavings, is also appropriate. Add another small amount of pellets over the fire pot.
NOTE: Do not use spirit, petrol, gasoline, lighter-fluid or kerosene for lighting or refreshing a fire in your grill.
4.Light the contents of the fire pot using a long match or long-nosed lighter. Allow the starter to burn for 3 to 5 minutes. Do not attempt to add more starter into the fire pot. This can cause injury.
5.Quickly and carefully replace the cooking components to the inside of the barrel. The lid must remain open during the start-up cycle.
6.Continue start-up by following steps four through six of Automatic Start-Up Procedure.
SHUTTING OFF YOUR GRILL
1.When finished cooking, turn the Temperature Control Dial to 177°C / 350°F and close the lid. Let your grill run for 5 to 10 minutes to go through its normal cleaning method. If you have been preparing foods that are extra greasy, allow the grill to burn-off for an extra 10 to 20 minutes. This will reduce the chance of causing a grease fire for the next start-up.
2.Once the grill burn-off is complete, keep the lid closed and turn the Temperature Control Dial down to 93°C / 200°F for five minutes to allow any pellets to burn out.
3.After five minutes, with the lid remaining closed, turn the Temperature Control Dial to the Off position. The auger system will stop feeding fuel and the flame will burn out, and the fan will continue to run until the cool-down cycle is complete.
CARE AND MAINTENANCE
Any Pit Boss unit will give you many years of flavorful service with minimum cleaning. An important step is allowing the grill and cooking grids to self-clean by running the grill at a high temperature for 5 to 10 minutes after each use. Follow these cleaning and maintenance tips to service your grill:
1.HOPPER ASSEMBLY
•The hopper includes a clean-out feature to allow for ease of cleaning and change out of pellet fuel flavors. To empty, locate the plate and the cover of the drop chute on the back side of the hopper. Place a clean, empty pail under the drop chute cover, then remove the cover piece. Unscrew the plate, slide outwards, and pellets will empty.
NOTE: Use a long handled brush or shop-vac to remove excess pellets, sawdust, and debris for a complete clean-out through the hopper screen.
PLATE
COVER
•Check and clean off any debris from the fan air intake vent, found on the bottom of the hopper. Once the hopper access panel is removed (see Electric Wire Diagram for diagram), carefully wipe off any grease build-up directly on the fan blades. This ensures airflow is sufficient to the feed system.
16
2. PROBES
• Kinks or folds in the probe wires may cause damage to the part. Wires should be rolled up in a large, loose coil.
• Although the probes are stainless steel, do not place in the dishwasher or submerge in water. Water damage to the internal wires will cause the probe to short-out, causing false readings. If a probe is damaged, it should be replaced.
3. |
INSIDE SURFACES |
|
|
|
|
|
• It is recommended to clean your fire pot after every few uses. This will ensure proper ignition and avoid any hard |
|
|||
|
build-up of debris or ash in the fire pot. |
|
|
|
|
|
|
|
|
||
|
• Use a long-handled grill cleaning brush, remove any food or build-up from the cooking grids. Best practice is to do |
|
|||
|
this while they are still warm from a previous cook. Grease fires are caused by too much fallen debris on the cooking |
ENGLISH |
|||
|
components of the grill. Clean the inside of your grill on a consistent basis. In the event you experience a grease fire, |
||||
|
|
||||
|
keep the grill lid closed to choke out the fire. If the fire does not go out quickly, carefully remove the food, turn the |
|
|||
|
grill off, and shut the lid until the fire is completely out. Lightly sprinkle baking soda, if available. |
|
|||
|
• Check your grease tray often, and clean out as necessary. Keep in mind the type of cooking you do. |
|
|||
|
IMPORTANT: Due to high heat, do not cover the flame broiler or probes with aluminum foil. |
|
|||
4. |
OUTSIDE SURFACES |
|
|
|
|
|
• Wipe your grill down after each use. Use warm soapy water to cut the grease. Do not use oven cleaner, abrasive |
|
|||
|
cleansers or abrasive cleaning pads on the outside grill surfaces. All painted surfaces are not covered under |
|
|||
|
warranty, but rather are part of general maintenance and upkeep. For paint scratches, wearing, or flaking of the |
|
|||
|
finish, all painted surfaces can be touched up using high heat BBQ paint. |
|
|||
|
• Use a grill cover to protect your grill for complete protection! A cover is your best protection against weather and |
|
|||
|
outside pollutants. When not in use or for longterm storage, keep the unit under a cover in a garage or shed. |
|
|||
|
|
CLEANING FREQUENCY TIME TABLE (NORMAL USE) |
|
||
ITEM |
|
CLEANING FREQUENCY |
CLEANING METHOD |
|
|
Bottom of Main Grill |
Every 5-6 Grill Sessions |
Scoop Out, Shop-Vac Excess Debris |
|
|
|
Fire pot |
Every 2-3 Grill Sessions |
Scoop Out, Shop-Vac Excess Debris |
|
|
|
Cooking Grids |
After Each Grill Session |
Burn Off Excess, Grill Cleaning Brush |
|
|
|
Flame Broiler |
Every 5-6 Grill Sessions |
Scrape Main Plate with Slider, Do Not Wash Clean |
|
|
|
Grease Tray |
After Each Grill Session |
Scrub Pad & Soapy Water |
|
|
|
Auger Feed System |
When Pellet Bag is Empty |
Allow Auger to Push Out Sawdust, Leaving Hopper Empty |
|
|
|
Hopper Electric Components |
Once A Year |
Dust Out Interior, Wipe Fan Blades with Soapy Water |
|
|
|
Air Intake Vent |
Every 5-6 Grill Sessions |
Dust, Scrub Pad & Soapy Water |
|
|
|
Temperature Probe |
Every 2-3 Grill Sessions |
Scrub Pad & Soapy Water |
|
|
17
ENGLISH
USING WOOD PELLET FUEL
They appear no thicker than the eraser on the end of a pencil. People who see them for the first time think they look like rabbit food; however, there is nothing small about the heat or flavor in barbecue wood pellet fuel. These clean-burning barbecue wood pellets generate about 8200 BTU’s per pound with very little ash, a low moisture content (5-7%), and are carbon neutral.
Barbecue wood pellets are produced by pure raw material (sawdust) being pulverized with a hammer-mill, and the material is pushed through a die with pressure. As the pellet is forced through the die, it is cut, cooled, screened, vacuumed, and then bagged for consumer use. Check with your local dealer for flavors available in your area.
HICKORY BLEND
Rich, smoky bacon-like flavor. Considered the “Kings of the Woods”
MESQUITE BLEND
Strong, tangy, spicy flavor. Think Tex-Mex cuisine.
APPLE BLEND
Smoky, mild sweetness flavor. Highly recommended for baking.
CHERRY BLEND
Slightly sweet, but also tart. Gives a rosy tint to light meals.
WHISKEY BARREL BLEND
Strong, sweet smoke with aromatic tang. Perfect for red meats.
COMPETITION BLEND
Perfect blend of sweet, savory, and tart. Used by many professional grillers.
NOTE: Always store wood pellets in a dry area. Avoid any contact or exposure to moisture will result in lower heat output or cause the pellets to swell and break apart. Use a moisture proof, resealable tub or bucket for proper storage.
COOKING GUIDELINES
Smoking and grilling styles of cooking can give you different results based on time and temperature. For best results, keep a record of what you cooked, at what temperature, how long you cooked for, and the results. Adjust to your taste for the next time. Practice makes perfect.
The culinary art of hot smoking refers to longer cooking times, but results in more natural wood flavor (and a sought-after smoke ring) on your meats. Higher cooking temperatures result in a shorter cooking time, locking in less smoke flavor.
TIP: For best results, allow time for meats to rest after cooking. This allows the natural juices to migrate back into the meat fiber, giving a much juicer, flavorful cut. Resting times can be as little as 3 minutes and up to 60 minutes, depending on the size of the protein.
STYLE OF |
HOT SMOKING |
ROAST |
|
BAKING |
GRILL/BAKE |
|
SEAR |
|||
COOKING |
(Very Low) |
(Low) |
|
(Medium) |
(Medium/High) |
|
(High) |
|||
Temp Range |
93-135°C / 199-275°F |
135-162°C / 275-323°F |
|
162-190°C / 323-374°F |
190-232°C / 374-449°F |
232-260°C / 449-500°F |
||||
|
|
|
|
|
|
|
|
|||
POULTRY |
Size |
|
Rare - 54°C / 130°F |
|
Medium - 60°C / 140°F |
|
Well Done - 77°C / 170°F |
|||
Turkey (whole) |
4.5-5.0 kg / 10-11 lbs. |
|
|
|
|
|
|
|
Grill 90 - 120 minutes |
|
|
5.3-6.4 kg / 12-14 lbs. |
|
|
|
|
|
|
|
Grill 110 - 140 minutes |
|
|
6.8-7.7 kg / 15-17 lbs. |
|
|
|
|
|
|
|
Grill 130 - 160 minutes |
|
|
8.2-10.0 kg / 18-22 lbs. |
|
|
|
|
|
|
|
Grill 140 - 170 minutes |
|
|
10.4-11.3 kg / 23-25 lbs. |
|
|
|
|
|
|
|
Grill 150 - 180 minutes |
|
Chicken (whole) |
1.36-2.26 kg / 3-5 lbs. |
|
|
|
|
|
|
|
Grill 1 - 1.5 hours |
|
Drumsticks, Breasts |
0.45 - 0.86 kg / 1 - 1½ lbs. |
|
|
|
|
|
|
Grill 30-60 minutes |
||
Small Game Birds |
0.45 - 0.86 kg / 1 - 1½ lbs. |
|
|
|
|
|
|
Grill 30-45 minutes |
||
Duck |
1.36-2.26 kg / 3-5 lbs. |
|
|
|
|
|
|
|
Roast or grill 2 - 2.5 hours |
18
PORK |
SIZE |
Precooked to Reheat |
Medium |
Well Done |
|||
60°C / 140°F |
|
66°C / 150°F |
71°C / 160°F |
||||
|
|
|
|||||
|
|
|
|
|
|
|
|
Ham |
2.5 cm / 1" |
12 minutes |
|
|
|
|
|
(Fully Cooked & |
1.36-1.81 kg / 3-4 lbs. |
50 minutes - 1 hour |
|
|
|
|
|
Boneless Portion, |
1.81-2.72 kg / 4-6 lbs. |
1 - 2 hours |
|
|
|
|
|
Smoked Picnic |
2.26-3.62 kg / 5-8 lbs. |
1 - 2½ hours |
|
|
|
|
|
Whole & Bone-In) |
4.53-5.44 kg / 10-12 lbs. |
2 - 2¾ hours |
|
|
|
|
|
Loin Roast |
1.36-1.81 kg / 3 - 4 lbs. |
|
|
1 - 2 hours |
2 - 3 hours |
||
Rib Crown Roast |
1.81-2.26 kg / 4 - 5 lbs. |
|
|
1½ - 2 hours |
2 - 3 hours |
||
Chop |
1.9-2.5 cm / ¾" - 1" |
|
|
10 - 12 minutes |
|
|
|
(loin, rib) |
3.1-3.9 cm / 1¼" - 1½" |
|
|
14 - 18 minutes |
|
|
|
Tenderloin |
1.9-2.5 cm / ¾" - 1" |
|
|
20 - 30 minutes |
30 - 45 minutes |
||
Loin Roast (boneless) |
1.36-2.26 kg / 3-5 lbs. |
|
|
1¼ - 1¾ hours |
1¾ - 2½ hours |
||
Boston Butt |
3.62-4.53 kg / 8-10 lbs. |
|
|
|
|
93 - 98°C / 200 - 210°F |
|
(Pork Shoulder) |
|
|
|
|
|
Internal Temperature |
|
|
|
|
|
|
|
|
|
BEEF |
SIZE |
HEAT |
Rare - 54°C / 130°F |
Medium - 60°C / 140°F |
Well Done - 65°C / 150°F |
||
Steak (New York, |
1.9 cm / ¾" |
High |
Sear 8-10 minutes |
|
|
||
Porter-house, Rib- |
2.5 cm / 1" |
|
Sear 10-12 minutes |
|
|
||
eye, Sirloin, T-bone, |
3.8 cm / 1½" |
|
Sear 10 minutes, grill 8-10 minutes |
|
|
||
or Tenderloin) |
5 cm / 2" |
|
Sear 10 minutes, grill 10-14 minutes |
|
|
||
Skirt Steak |
0.6 - 12.7 cm / ¼" - ½" |
High |
Sear 5-7 minutes |
|
|
||
Flank Steak |
0.45 - 0.86 kg |
Medium |
Sear 4 minutes, grill 8-10 minutes |
|
|
||
|
/ 1 - 1½ lbs., 1.9 cm / ¾" |
|
|
|
|
|
|
Kabob |
2.5 - 3.8 cm / 1 - 1½" cubes |
Medium |
Grill 10 - 12 minutes |
|
|
||
Tenderloin, whole |
1.58 - 1.81 kg / 3½ - 4 lbs. |
High/Medium |
Sear 10 minutes, grill 15-20 minutes |
|
|
||
Ground Beef Patty |
1.9 cm / ¾" |
High/Medium |
Sear 4 minutes, grill 4-6 minutes |
|
|
||
Rib-eyeRoast(boneless) |
2.26 - 2.72 kg / 5 - 6 lbs. |
Medium |
Grill 1½ - 2 hours |
|
|
||
Tri-tip Roast |
0.9 - 1.13 kg / 2 - 2½ lbs. |
High/Medium |
Sear 10 minutes, grill 20-30 minutes |
|
|
||
Rib Roast |
5.44 - 6.35 kg / 12 - 14 lbs. |
Medium |
2½ - 2¾ hours |
|
|
||
Veal Loin Chop |
2.5cm / 1" |
Medium |
10 - 12 minutes direct |
|
|
||
Brisket |
7.25 - 3.62 kg / 16 -18 lbs. |
Hot Smoke |
Cook until internal temperature reaches 91°C / 195°F |
||||
|
|
|
|
|
|||
LAMB |
Size |
Rare - 54°C / 130°F |
Medium - 60°C / 140°F |
Well Done - 71°C / 160°F |
|||
Roast (fresh) |
2.26 - 2.72 kg / 5 - 6 lbs. |
|
|
1 - 2 hours |
|
|
|
Rib Crown Roast |
1.36-2.26 kg / 3-5 lbs. |
|
|
1 - 1½ hours |
1½ hours |
||
|
|
|
|
|
|||
SEAFOOD |
Size |
Rare - 54°C / 130°F |
Medium - 60°C / 140°F |
Well Done - 82°C / 180°F |
|||
Fish (whole) |
0.5 kg / 1 lb. |
|
|
|
|
Grill 10 - 20 minutes |
|
|
0.9 - 1.1 kg / 2 - 2½ lbs. |
|
|
|
|
Grill 20 - 30 minutes |
|
|
1.4 kg / 3 lbs. |
|
|
|
|
Grill 30 - 45 minutes |
|
Fish (filets) |
0.6-1.3 cm / ¼” - ½” |
|
|
|
|
Grill 3 - 5 minutes, until flaky |
|
Lobster Tail |
0.15 kg / 5 oz. |
|
|
|
|
Grill 5 - 6 minutes |
|
|
0.3 kg / 10 oz. |
|
|
|
|
Grill 10 - 12 minutes |
|
|
|
|
|
|
|||
WILD GAME |
Size |
Rare - 60°C / 140°F |
Medium - 71°C / 160°F |
Well Done - 77°C / 170°F |
|||
Roast (fresh) |
2.26 - 2.72 kg / 5 - 6 lbs. |
|
|
1 - 1½ hours |
1½ - 2 hours |
||
Large Cuts (fresh) |
3.62-4.53 kg / 8-10 lbs. |
|
|
1 hours |
1½ hours |
ENGLISH
19
TIPS & TECHNIQUES
Follow these helpful tips and techniques, passed on from Pit Boss owners, our staff, and customers just like you, to become more familiar with your grill:
1. FOOD SAFETY
• Keep everything in the kitchen and cooking area clean. Use different platters and utensils for the cooked meat than the ones you used to prepare or transport the raw meat out to the grill. This will prevent cross contamination of bacteria. Each marinade or basting sauce should have its own utensil.
ENGLISH |
• |
Keep hot foods hot (above 60ºC / 140ºF), and keep cold foods cold (below 3ºC / 37ºF). |
|
||
|
• |
A marinade should never be saved to use at a later time. If you are going to use it to serve with your meat, be sure |
|
|
to bring it to a boil before serving. |
|
• |
Cooked foods should not be left out in the heat for more than an hour. Do not leave hot foods out of refrigeration |
|
|
for more than two hours. |
|
• |
Defrost and marinade meats by refrigeration. Do not thaw meat at room temperature or on a counter top. Bacteria |
|
|
can grow and multiply rapidly in warm, moist foods. Wash hands thoroughly with hot, soapy water before starting |
|
|
any meal preparation and after handling fresh meat, fish and poultry. |
|
2. COOKING PREPARATION |
|
|
• |
When switching from a high temperature to a low temperature, lift the lid and leave it open until the actual |
|
|
temperature is close to your desired temperature. This speeds up the process and ensures the fire will not go out. |
|
• |
Be prepared, or Mise en Place. This refers to preparing the cooking recipe, fuel, accessories, utensils, and all |
|
|
ingredients you require at grill side before you start cooking. Also, read the entire recipe, start to finish, before |
|
|
lighting the grill. |
|
• |
A BBQ floor mat is very useful. Due to food handling accidents and cooking spatter, a BBQ floor mat would protect |
|
|
a deck, patio, or stone platform from the possibility of grease stains or accidental spills. |
|
3. GRILLING TIPS AND TECHNIQUES |
|
|
• |
To infuse more smoke flavor into your meats, cook longer and at lower temperatures (also known as low and slow). |
|
|
Meat will close its fibers after it reaches an internal temperature of 49ºC / 120ºF. Misting, or mopping, are great ways |
|
|
to keep meat from drying out. |
|
• |
While searing your meats, cook with the lid down. Always use a meat thermometer to determine the internal |
|
|
temperature of the foods you are cooking. Smoking foods with hardwood pellets will turn meats and poultry pink. |
|
|
The band of pink (after cooking) is referred to as a smoke ring and is highly prized by outdoor chefs. |
|
• |
Sugar-based sauces are best applied near the end of cooking to prevent burning and flare-ups. |
|
• |
Leave open space between the foods and the extremities of the barrel for proper heat flow. Food on a crowded grill |
|
|
will require more cooking time. |
|
• |
Use a set of long-handled tongs for turning meats, and a spatula for turning burgers and fish. Using a piercing |
|
|
utensil, such as a fork, will prick the meat and allow the juices to escape. |
|
• |
Foods in deep casserole dishes will require more time to cook than a shallow baking pan. |
|
• |
It’s a good idea to put cooked food onto a heated platter, keeping the food warm. Red meats, such as steak and |
|
|
roasts, benefit from resting for several minutes before serving. It allows the juices that were driven to the surface |
|
|
by heat to ease back to the center of the meat, adding more flavor. |
20