FRONT SP |
SUPER WF |
ORDER NO.
RRV2496
SPEAKER SYSTEM
S-VS800VLRW
XJI/E
XJI/NC
This product is component of system.
|
Component |
System |
Service Manual |
Remarks |
||
|
|
|
|
|
|
|
COMPACT MINI COMPONENT |
X-VS800D |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
STEREO DVD CASSETE DECK RECEIVER |
XV-VS800 |
|
RRV0000 |
|
|
|
|
|
|
|
|
|
|
SPEAKER SYSTEM |
S-VS800VLRW |
|
RRV2496 |
This service manual |
|
|
|
|
|
|
|
|
|
SPEAKER SYSTEM |
S-A9LRC |
|
RRV2332 |
|
|
|
|
|
|
|
|
|
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 c PIONEER CORPORATION 2001
T – ZZV JULY 2001 Printed in Japan
S-VS800VLRW
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
( for Front Speaker)
The cosmetic baffle assy is attached to the cabinet by 4 external hexagon socket screws. To detach the cosmetic baffle assy, loosen these screws by the hexagon screw driver. Then carefully disconnect the wires of the woofer and mid-range mounted on the cosmetic baffle assy. To attach the cosmetic baffle assy, replace it on the cabinet correctly and secure with 4 screws.
The woofer is attached to the cosmetic baffle assy by 4 internal screws. To detach it ,unfasten these screws. When attaching it, face its terminal downward.
The mid-range is attached to the cosmetic baffle assy by 2 internal screws. To detach it, loosen these screws. Then carefully disconnect the wires of the tweeter mounted on the cosmetic baffle assy by adhesion. To attach the mid-range, face its terminal downward.
The network assy is connected to the input terminal. To detach it, disconnect the wire from the input terminal. To attach the network assy, connect the wire of the network assy to the input terminal correctly.
When exchange the tweeter, do it with the cosmetic baffle assy.
( for Super Woofer)
The cosmetic baffle assy is attached to the cabinet by 4 external hexagon socket screws. To detach the cosmetic baffle assy, loosen these screws by the hexagon screw driver. Then carefully disconnect the wires of the woofer mounted on the cosmetic baffle assy. To attach the cosmetic baffle assy, replace it on the cabinet correctly and secure with 4 screws.
The woofer is attached to the cosmetic baffle assy together with the cosmetic ring assy by 4 internal screws. To detach the woofer(cosmetic ring assy), lossen these screws. To attach the cosmetic ring assy, fit the notch of the cosmetic ring to the projection of the cosmetic baffle assy. To attach the woofer ,face its terminal downward and upward. To attach the cosmetic ring assy and woofer, replace it on the cosmetic baffle assy correctly and secure with 4 screws.
The network assy is attached to the bottom board by one internal screw and adhesive. To detach it, unfasten that screw and pry it out. To attach it, apply adhesive to the bottom board. Then press it to the bottom board, and secure with one screw.
When attaching the network assy, do it carefully so that each wire is not touched.
2