Philips 74HCT241U, 74HCT241PW, 74HCT241N, 74HCT241DB, 74HCT241D Datasheet
...
DATA SH EET
Product specification
File under Integrated Circuits, IC06
September 1993
INTEGRATED CIRCUITS
74HC/HCT241
Octal buffer/line driver; 3-state
For a complete data sheet, please also download:
•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
September 1993 2
Philips Semiconductors Product specification
Octal buffer/line driver; 3-state 74HC/HCT241
FEATURES
• Output capability: bus driver
• ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT241 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT241 are octal non-inverting buffer/line
drivers with 3-state outputs. The 3-state outputs are
controlled by the output enable inputs 1OE and 2OE.
QUICK REFERENCE DATA
GND = 0 V; T
amb
=25°C; tr=tf= 6 ns
Notes
1. C
PD
is used to determine the dynamic power dissipation (PD in µW):
PD=CPD× V
CC
2
× fi+∑(CL× V
CC
2
× fo) where:
fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V
CC
2
× fo) = sum of outputs
CL= output load capacitance in pF
VCC= supply voltage in V
2. For HC the condition is VI= GND to V
CC
For HCT the condition is VI= GND to VCC− 1.5 V
ORDERING INFORMATION
See
“74HC/HCT/HCU/HCMOS Logic Package Information”
.
SYMBOL PARAMETER CONDITIONS
TYPICAL
UNIT
HC HCT
t
PHL
/ t
PLH
propagation delay
1An to 1Yn;
2An to 2Y
n
CL= 15 pF; VCC= 5 V 7 11 ns
C
I
input capacitance 3.5 3.5 pF
C
PD
power dissipation capacitance per buffer notes 1 and 2 30 30 pF
September 1993 3
Philips Semiconductors Product specification
Octal buffer/line driver; 3-state 74HC/HCT241
PIN DESCRIPTION
PIN NO. SYMBOL NAME AND FUNCTION
11
OE output enable input (active LOW)
2, 4, 6, 8 1A
0
to 1A
3
data inputs
3, 5, 7, 9 2Y
0
to 2Y
3
bus outputs
10 GND ground (0 V)
17, 15, 13, 11 2A
0
to 2A
3
data inputs
18, 16, 14, 12 1Y
0
to 1Y
3
bus outputs
19 20E output enable input (active HIGH)
20 V
CC
positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol
Loading...