PRODUCT SPECIFICATION |
video transmission |
|
|
FT85011A/FR85011A Fiber Transmitter and Receiver
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO WITH BIDIRECTIONAL DATA
Product Features
•8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
•Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron® Communication
•Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
•Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
•Multimode Fiber Support for Distances up to 6 km
•Single-Mode Fiber Support for Distances up to 46 km
•Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
•Compatible with NTSC, PAL, and SECAM Video Standards
•Meets NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
•No Performance Adjustments Required
•12 VDC or 24 VAC Power Supply
Available in multimode and single-mode versions, the FT85011A/ FR85011A fiber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber. In addition, patent-pending technology provides the solution for allowing Coaxitron® pan/tilt/ zoom (PTZ) control data to be transmitted the full distance of the fiber (up to 6 km for multimode fiber and up to 46 km for single-mode fiber). When using single-mode fiber, the FT85011A transmitter and the FR85011A receiver offer an exceptional optical power budget of
•Stand-Alone and Rack-Mountable Modular Design
•LED Indicators for Monitoring of Signal Status, Laser Status, Data Activity, and Operating Power
ONE |
|
ONE |
|
VIDEO |
|
VIDEO |
|
INPUT |
|
OUTPUT |
|
FT85011A |
|
FR85011A |
|
TRANSMITTER |
ONE |
RECEIVER |
|
DATA |
DATA |
||
FIBER |
|||
|
|
SINGLE-CHANNEL VIDEO
AND BIDIRECTIONAL DATA APPLICATION
28 dB.
Modular in design, the FT85011A and FR85011A units can be rack mounted or can be used as stand-alone modules. Rack mounting is accomplished using the RK5000 Series rack mount chassis. Stand-alone modules can be placed on a desktop or can be mounted to a wall.
In addition to compatibility with each other, the FT85011A transmitter and the FR85011A receiver are compatible with other fiber models. The FT85011A transmitter is backward compatible with the FR85011 receiver. The FR85011A receiver is backward compatible with the FS85011 and FT85011 transmitters.
ONE |
|
ONE |
|
VIDEO |
|
VIDEO |
|
INPUT |
|
OUTPUT |
|
FT85011A |
|
FR85011A |
|
TRANSMITTER |
ONE |
RECEIVER |
|
COAXITRON |
COAXITRON |
||
FIBER |
|||
DATA |
DATA |
||
|
SINGLE-CHANNEL VIDEO
AND COAXITRON DATA APPLICATION
|
|
|
|
International Standards |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Organization Registered Firm; |
|
|
|
|
|
C2604 / NEW 7-06 |
|
|
|
|
|||
|
ISO 9001 Quality System |
|
|
|
|
|||
|
|
|
|
|
TECHNICAL SPECIFICATIONS
MODELS
FT85011A Transmitter and Compatible Receivers
|
Model No. |
|
Fiber Optic |
|
Optical |
Maximum |
|
|
|
|
|||
FT85011A |
|
|
Connector |
Wavelength |
Power |
Transmission |
Transmitter |
Compatible Receivers |
|
Type |
(Video/Data) |
Budget |
Distance |
|
|
Multimode (62.5/125 µm) |
|
|
|
|
FT85011AMSTR |
FR85011AMSTR |
|
ST |
1310/850 nm1 |
26 dB* |
6 km (3.7 mi)† |
|
FR85011MSTR |
|
ST |
1310/850 nm1 |
20 dB* |
6 km (3.7 mi)† |
|
|
Single-Mode (9/125 µm) |
|
|
|
|
FT85011ASSTR |
FR85011ASSTR |
|
ST |
1310/1550 nm |
28 dB* |
46 km (28.6 mi)‡ |
|
FR85011SSTR |
|
ST |
1310/1550 nm |
20 dB* |
30 km (18.6 mi)‡ |
FT85011ASFCR |
FR85011ASFCR |
|
FC |
1310/1550 nm |
28 dB* |
46 km (28.6 mi)‡ |
|
FR85011SFCR |
|
FC |
1310/1550 nm |
20 dB* |
30 km (18.6 mi)‡ |
*When using 50/125 µm multimode fiber, subtract 3 dB from the optical power budget.
†Maximum transmission distance is limited by fiber bandwidth.
‡Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.
Notes:
• For conformal coated models, replace the first letter F in the model number with the letter C. The conformal coated version of FT85011AMSTR, for example, is CT85011AMSTR.
• For models with higher optical power budgets, contact the factory.
Supplied Accessories
•Regulated switching power supply with multiple plug adapters (North American, Australian, United Kingdom, and European); 100-240 VAC, 50-60 Hz input, 12 VDC output
Note: In extreme temperature conditions, it is recommended that an industrial-rated outdoor power supply such as the Pelco® WCS1-4 power supply be used.
•Wall clip for attachment of single module to wall