Peerless-AV MIS660 User Manual

Installation and Assembly - Neck Security Fastener Pack for Philips Display Models: 26HFL5830D/27, 32HFL5860D/27, 37HFL5560D/27, 42HFL7580A/27, 42HFL5860D/27, 52HFL5580D/27

Model: MIS660

IMPORTANT! Read instruction sheet before you st art installation and assembly .

Before you start make sure all parts listed are included with your product.

Parts List

Description

A M5 x 25 mm socket pin serreated washer head screw 4 510-1122 B M6 x 20 mm socket pin serreated washer head screw 4 510-9554 C 5/32'' (4mm) security allen wrench 1 560-9646 D # 10 washer 4 540-9400 E M6 x 8 mm socket pin screw 4 520-1255

Qty. Part #

Some parts may appear slightly different than illustrated.

This product is UL Listed. It must be installed by a qualified

professional installer.

WARNING

• Do not overtighten! Overtightening may cause permanent damage to the screen. T orque to 26-35 in • lb (30-40 kg • cm).

Stand for 26" and 32" Screens

Slide screen onto base until holes align as shown in figure 1.1. Att ach screen to stand using four M5 x 25 mm socket pin serrated washer head screws (A) and flat washers (D) as shown in figure 1.2. Tighten with 4 mm security allen wrench (C).

fig 1.1

fig 1.2

1 of 2

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

ISSUED: 09-08-08 SHEET #: 125-9014-2

Stand for 37/52" Screens

Place screen adapter base on to base of stand and secure using four M6 x 20 mm socket pin serrated washer head screws (B) or four M6 x 8 mm socket pin screws (E).

SCREEN ADAPTER BASE

Slide adapter tubes into hole located on screen. Secure using two M5 x 25 mm socket pin serrated washer head screws (A) and washers (D).

BASE

B or E

BASE MAY BE DIFFERENT THAN ILLUSTRATED

2 of 2

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

All other brand and product names are trademarks or registered trademarks of their respective owners.

ISSUED: 09-08-08 SHEET #: 125-9014-2