Parr Instrument Parr Magnetic Drive Shields User Manual
688M
Parr Magnetic Drive Shields
Installation Instructions
Parr Magnetic Drive Shields are intended to protect users against a rotating magnetic drive and its
attachments inclusive of the shaft and coupling.
Typical installation steps are as follows:
1. Attach rear bracket to overarm or support plate (as applicable, depending on reactor style)
using round head machine screws provided
2. Attach shield to rear bracket using thumb screws provided
Note: Portions of the rotating magnetic drive close to the reactor head may not be completely covered
by the magnetic drive guard. The user is hereby warned against this residual hazard. Parr believes that
an attempt to eliminate this hazard would result in loss of functionality of the equipment.
COMPACT STYLE
C
C
B
B
A
A
D
B
D
D
BENCHTOP AND FLOORSTAND
CART STYLE
C
A
688M R00 05/06/14
A Bracket
B Shield
C Round Head Machine Screw
D Thumb Screw
P
arr Instrument Company
211 53rd Street • Moline, Illinois 61265 USA 1-309-762-7716 • 1-800-872-7720 • Fax: 1-309-762-9453
E-mail: parr@parrinst.com • www.parrinst.com
Loading...