PARKSIDE PNKP 105 B1 User manual [gb]

HOT GLUE GUN PNKP 105 B1
HOT GLUE GUN
Translation of the original instructions
HEISSKLEBEPISTOLE
Originalbetriebsanleitung
IAN 291780
ΠΙΣΤΌΛΙ ΘΕΡΜΌΚΌΛΛΗΣHΣ
Μετάφραση των αυθεντικών οδηγιών λειτουργίας
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τις δυο σελίδες με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
GB / IE / NI/CY Translation of t he original instructions Page 1 GR / CY Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα 15 DE / AT / CH Originalbetriebsanleitung Seite 29
Contents
Introduction .................................. 2
Intended use ..........................................2
Features .............................................3
Package contents ......................................3
Technical details .......................................3
General safety warnings for power tools in
household use ................................ 4
Additional safety instructions for glue guns ..................5
Original accessories/auxiliary equipment ...................6
Operation ................................... 6
Maintenance and cleaning ...................... 7
Disposal ..................................... 8
Disposal of the appliance ................................8
Kompernass Handels GmbH warranty ............ 9
Service ..................................... 11
Importer .................................... 11
Translation of the original Conformity Declaration . 12
PNKP 105 B1
GB│IE│NI│CY 
 1
HOT GLUE GUN PNKP 105 B1
Introduction
Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.
Intended use
This appliance is specifically intended for a variety of creative hobby applications involving the gluing of heat-sensitive materials such as paper, flowers, cardboard, packaging, plastics, leather, ceramics, glass and fabric. The material to be glued must be clean, dry and free of grease. Any other usage of or modification to the appliance is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage(s) attribut­able to misuse. The appliance is not intended for commercial use.
2 │ GB
│IE│NI│
CY
PNKP 105 B1
Features
Feeder shaft Power cable Trigger
Stand Nozzle Thermal protection for nozzle Glue sticks
Package contents
1 hot glue gun PNKP 105 B1 1 stand 6 glue sticks 1 set of operating instructions
Technical details
Rated voltage: 230V ~ 50Hz (AC) Rated power consumption: 5 W (20 W in operation) Operating temperature: 105–140°C Heating-up time: approx. 5 min. Protection class: II / For glue sticks: ø 7 mm e.g. PARKSIDE PNKPZ 3 A1
(double insulation)
PNKP 105 B1
GB│IE│NI│CY 
 3
General safety warnings for power tools in household use
CAUTION!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to use the appliance as a plaything. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their customer service department or a similarly quali­fied person.
4 │ GB
│IE│NI│
CY
PNKP 105 B1
Additional safety instructions for glue guns
Children should be supervised to ensure that they do not play
with the appliance.
ATTENTION! This appliance must be placed on its stand
when not in use.
Always protect the appliance from rain and moisture. Water
entering a power tool will increase the risk of electric shock.
Do not misuse the power cord, e.g. to carry or hang up the appli-
ance, or to pull the plug from the socket. Keep cord away from heat, oil, sharp edges or moving parts. If the power cord is damaged or severed during work, do not touch the cord but rather pull out the plug. Damaged or entangled cords increase the risk of electric shock.
Only for indoor use.
If you take a break of longer than 30 minutes, pull out the power
plug.
Allow the appliance to cool completely after use and before
storage.
Do not work on any material containing asbestos.
Avoid the risk of injury or fire as well as health risks: RISK OF
BURNS! The adhesive and the nozzle reach a temperature of around 105°C. Do not touch the nozzle or the glue. Do not allow hot glue to come into contact with people or animals. In case of contact with skin, rinse the affected part in cold running water for a few minutes. Do not attempt to remove the adhesive from the skin.
Always route the power cable towards the rear, away from the
appliance.
PNKP 105 B1
GB│IE│NI│CY 
 5
Original accessories/auxiliary equipment
Only use the accessories and additional equipment that are
specified in the operating instructions and compatible with the appliance.
Operation
Preparing the surfaces to be glued:
Do not use flammable solvents to clean the surfaces to be glued.
The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
The area to be glued must be clean, dry and free of grease.
Smooth surfaces should be roughened before gluing.Quick-cooling materials such as steel should be warmed a little
to facilitate adhesion.
1. Fold out the stand
2. Push a glue stick
3. Allow the appliance heat up for about 5 minutes. The appliance is now ready for use.
. Put down the appliance.
into the feeder shaft .
6 │ GB
│IE│NI│
CY
PNKP 105 B1
Preparing the surfaces to be glued:
140
Pull the trigger
with your requirements.
1. Apply the glue in spots. For flexible materials, such as textiles, apply the glue in zigzag lines.
2. Press the two workpieces to be bonded together immediately after applying the glue and hold for about 30 seconds. The glued bond is ready after about 5 minutes.
3. During breaks in work, put the glue gun down on the stand
Switching the appliance off:
Unplug the appliance from the mains socket.
The nozzle
to regulate the flow of glue in accordance
reaches a temperature of over 140°C.
Maintenance and cleaning
WARNING! ALWAYS REMOVE THE POWER PLUG
FROM THE POWER SOCKET BEFORE CLEANING THE APPLIANCE.
The low-temperature glue gun is maintenance-free.
Keep the appliance clean and dry at all times.
Never permit liquids to enter inside the appliance. Use a cloth to
clean the housing. Never use petrol, solvents or cleansers which can damage plastic.
.
PNKP 105 B1
GB│IE│NI│CY 
 7
Disposal
Disposal of the appliance
The packaging is made from environmentally friendly mate-
rial and can be disposed of at your local recycling plant.
Do not dispose of power tools in your normal
household waste!
European Directive 2012/19/EU requires that worn-out power tools be collected separately and recycled in an environmentally compatible manner.
Your local community or municipal authorities can provide informa­tion on how to dispose of the worn-out appliance.
8 │ GB
│IE│NI│
CY
PNKP 105 B1
Kompernass Handels GmbH warranty
Dear Customer, This appliance has a 3-year warranty valid from the date of purchase.
If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the war­ranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after ex­piry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict qual­ity guidelines and inspected meticulously prior to delivery.
PNKP 105 B1
GB│IE│NI│CY 
 9
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the oper­ating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the follow­ing instructions:
Please have the till receipt and the item number (e.g. IAN
12345) available as proof of purchase.
You will find the item number on the type plate, an engraving on
the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
If functional or other defects occur, please contact the service
department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the ser-
vice address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
10 │ GB
│IE│NI│
CY
PNKP 105 B1
You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak)) E-Mail: kompernass@lidl.ie
CY
Service Cyprus
Tel.: 8009 4409 E-Mail: kompernass@lidl.com.cy
IAN 291780
Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE - 44867 BOCHUM GERMANY www.kompernass.com
PNKP 105 B1
GB│IE│NI│CY 
 11
Loading...
+ 32 hidden pages