Panasonic Viera TH-42PX74E, Viera TH-37PX70E, Viera TH-42PX70E, Viera TH-50PX70E, Viera TH-37PX71E Operating Instructions Manual

...
0 (0)
OPTION
DIRECT TV REC
EXIT
RETURN
INPUT
TV
Plasma Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects
on
human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Printed in Czech Republic
Model No. TH-42PX74E
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic-europe.com
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identifi cation in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Licence
Trademark Credits
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, USA.
S-VGA is a registered trademark of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
HDMI, the HDMI Logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TH-42PX74E Declaration of Conformity No 4480, 15 January 2007
2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
media excitement
Enjoy rich multi-media
Camcorder
Amplifi er with Speaker system
VCR
DVD player
DVD Recorder
Personal
computer
Set top box
Contents
Safety Precautions ······································ 4 (Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
How to Use Menu Functions ·····················18 (picture, sound quality, etc.)
DVB Settings (DVB) ·································· 22
(pay-TV, software update, time adjustment)
Editing Channels ·······································24
Tuning Channels ·······································26
Restore Settings ······································ 29
Input Labels ·············································· 30
Displaying PC Screen on TV ·····················31
Q-Link Functions ······································· 32
HDMI Functions ·······································33
(HDMI terminal / VIERA Link)
External Equipment ···································36
Basic Features
Watching TV ··············································12
Watching Videos and DVDs ······················14
Viewing Teletext ········································16
Enjoy your TV!
Technical Information ································38
FAQs ·························································41
Specifi cations ············································43
Licence ······················································ 44
FAQs, etc.
Accessories / Options
·········· 6
Identifying Controls
··············· 7
Basic Connection
··················· 8
Auto Setup
······························· 10
Quick Start Guide
Notice for DVB functions
Any functions related to DVB (Digital Video Broadcasting) will work in areas where DVB-T (MPEG2) digital terrestrial broadcasting are received. Consult your local Panasonic dealer with coverage areas.
DVB functions may not be available in some countries.
This TV has the capability for DVB specifi cations. But future DVB services cannot be guaranteed.
4 5
Safety Precautions
If you fi nd any abnormality, remove the mains plug immediately!
Do not remove covers NEVER modify the TV yourself
Keep liquids away from the TV
To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the TV. (including on shelves above, etc.)
(High-voltage components may cause serious electrical shock.)
Have the TV checked, adjusted, or repaired at your local Panasonic dealer.
AC 220-240 V 50 / 60 Hz
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other sources of heat. To prevent fi re never place any type of candle or naked fl ame on top or near the TV.
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.) Ensure that the mains plug is easily accessible. Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection. Do not touch the mains plug with a wet hand. (This may cause electrical shock.) Do not use any mains lead other than that provided with this TV. (This may cause fi re or electrical shock.) Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warning Caution
Blocked ventilation by curtains, etc. may cause overheating, fi re or electrical shock.
Do not block the rear air vents
Notes
Maintenance
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).
Caution
Use care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.
Electronic equipment In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound).
Equipment with an infrared sensor This TV also emits infrared rays (this may affect operation of other equipment).
Keep the TV away from these equipment
Do not place foreign objects inside the TV
Do not let metal or fl ammable objects drop into the TV through the air vents (fi re or electrical shock may result).
Use only the dedicated stands / mounting equipment
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Using an unauthorized stand or other fi xtures may make the TV shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).
If no signal is received and no operation is performed in TV mode for 30 minutes, the TV will automatically go to standby mode.
Auto power standby function
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
Transport only in upright position
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 41)
Typical still images
Channel number and other logos Image displayed in 4:3 mode Video game Computer image
Allow suffi cient space around the TV for radiated heat
Minimum distance
10
10
10
7
(cm)
6
7
Quick Start Guide
TV
OPTION
DIRECT TV REC
EXIT
RETURN
INPUT
TV
PULL
Identifying ControlsAccessories / Options
Batteries for the Remote Control Transmitter
(2)
R6 (UM3)
Remote Control Transmitter
EUR7737Z50
Standard accessories
Check that you have the accessories and items shown
Installing remote’s batteries
Identifying Controls
Accessories / Options
Using the clamper
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
1
Pull open
Hook
2
Note the correct polarity (+ or -)
Close
Do not bundle the RF cable and mains lead together (could cause distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly manual to fi x cables.
Rear of the TV
snaps
To remove from the TV:
To loosen:
Keep pushing
both side snaps
Set the tip
in the hooks
Insert the clamper in a hole
hole
1. Attach the clamper
2. Bundle the cables
Keep pushing
the knob
knob
hooks
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Optional accessories
Pedestal Plasma TV stand Wall-hanging bracket
(vertical)
TY-WK42PV3W
(angle)
TY-WK42PR2W TY-WK42PR3W
TY-ST42D1-WG TY-ST42D1-WK TY-ST42D2-WG
TY-S42PX70WK
Operating Instructions
Pan European Guarantee Card
Clamper (2)
Mains Lead
Pedestal (ST-42D2-WK)
TBL0E0007
Read the manual of the pedestal for installation.
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
Remote control signal receiver
Changes the input mode
Function select
Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 27)
DVB LED
DVB system active during Direct TV Recording (Standby) :orange
Power LED
Standby: red On: green
Lift door to open
Mains power On / Off switch
Cursor buttons to make selections and adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio (p. 13)
Selects programmes in sequence
Teletext (p. 16)
OK button to confi rm selections and choices Press after selecting programme positions to quickly change programme.
VCR / DVD operations (p. 15)
Volume
Programme Information (p. 13)
Teletext Index (p. 17)
Coloured buttons used for the selection, navigation and operation of various functions
EXIT (Returns to TV screen)
Programme / channel change buttons (0-9) and Teletext page buttons.
(p. 12 and p. 16)
When in Standby mode, switches TV On.
Access VIERA Link Menu (p. 35) Programme Guide (p. 12)
Option menu Sets the preferred settings of viewing and sound options easily (p. 13)
Main Menu Press to access VIERA Link, Picture, Sound and Setup menus (p. 18)
Subtitles Showing subtitles (p. 13)
Changes the input mode TV -
switches DVB (digital broadcasting) / Analogue mode
(p. 12)
AV - changes AV input mode (p. 14)
DIRECT TV Recording
To immediately record programme in VCR / DVD recorder with Q-Link connection (p. 32)
Returns to the previous menu
Still picture (p. 13) Teletext Hold (p. 17)
8
9
Quick Start Guide
VIDEO
RGB
AUDIO
AUDIO
VIDEO
S VIDEO
AV2
COMPONENT
VIDEO
RGB
AV1
PC
AUDIO
IN
L
R
Y
P
B
P
R
LR
RF IN
RF OUT
VIDEO
RGB
AUDIO
AUDIO
VIDEO
S VIDEO
AV2
COMPONENT
VIDEO
RGB
AV1
PC
AUDIO
IN
L
R
Y
P
B
P
R
LR
VIDEO
RGB
AUDIO
AUDIO
VIDEO
S VIDEO
AV2
COMPONENT
VIDEO
RGB
AV1
PC
AUDIO
IN
L
R
Y
P
B
P
R
LR
RF OUT
RF IN
RF OUT
RF IN
RF IN
Basic Connection
Basic Connection
External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet fi rst.
Example 1 Connecting aerial
Example 2 Connecting DVD Recorder / VCR
TV only TV, DVD Recorder or VCR
Note
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 32).
Example 3 Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
DVD Recorder
or VCR
SCART cable (fully wired)
RF cable
Aerial
Mains lead (supplied)
Rear of the TV
Set top box
AC 220-240 V 50 / 60 Hz
RF cable
RF cable
SCART cable (fully wired)
SCART cable (fully wired)
RF cable
Clamper
To unfasten
Mains lead (supplied)
Mains lead (supplied)
SCART cable (fully wired)
DVD Recorder or VCR
RF cable
Aerial AerialRear of the TV Rear of the TV
RF cable
RF cable
AC 220-240 V 50 / 60 Hz
AC 220-240 V 50 / 60 Hz
10
11
Quick Start Guide
OPTION
DIRECT TV REC
INPUT
EXIT
RETURN
TV
Select
EXIT Change RETURN
Mode Music
Bass Treble Balance Surround Off Volume Correction MPX Stereo
Sound Menu
Reset to Default Set
Auto Setup - Digital and Analogue
EXIT
This will take about 3 mins.
RETURN
Analogue Scan 2 78 1 41
Digital Scan 5 69
62
Channel Service Name Type Quality
CBBC Channel DVB 10 62 BBC Radio Wales DVB 10 62
BBC Radio Cymru
DVB 10
62
E4
DVB 10
62
Cartoon Nwk
DVB 10
CH 29
Analogue
-
CH 33
BBC1
Analogue
-
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Country
Portugal
Spain
Italy
France
Austria
Germany
Netherlands
Hungary
Czech
E.Eu
Poland
Switzerland
Belgium
Finland
Norway
Sweden
Denmark
Greece
Menüsprache
Slovenčina
Čeština
Еλληνικά
Italiano
Français
English
Srpski
Deutsch
Português
Türkçe
Suomi
Polski
Românǎ
Hrvatski
Nederlands
Slovenščina
Български
Magyar
Svenska
Dansk
Norsk
Español
Viewing Mode
Dynamic Normal Cinema
EXIT
RETURN
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
(example: Sound Menu)
On-screen operation guide will help you.
Auto Setup
Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer.
Auto Setup is now complete and your TV is ready for viewing.
You can now use the remote control to turn On the TV or turn the TV to standby mode. (Power LED: On)
To edit channels
Editing Channels (p. 24)
Analogue Programme Edit (p. 27)
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options have been set
Many features available on this TV can be accessed via the On Screen Display menu.
Note
If tuning have failed “Auto Setup” (p. 27).
If downloading have failed “Download” (p. 21).
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.
How to use remote control
Auto Setup
Using the On Screen Displays
Exit the menu system and return to the normal viewing screen
4
Start Auto Setup
If a compatible recording equipment with Q-Link or similar technologies (p. 32) is connected, analogue channel information is automatically downloaded to the equipment.
Auto Setup will start to search for TV channels and store them.
The sorted programme order
depends upon the TV signal, the broadcasting system and reception conditions.
3
Select your country
2
Select the language
Also possible to change the setting in Picture Menu (p. 20)
5
Select the picture setting
select
select
store
select
set
12
13
Viewing
DIRECT TV REC
RETURN
OPTION
EXIT
INPUT
TV
1 BBS
23:35
Corontation Street 20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
Cartoon Nwk
All DVB Services
BBC Radio Wales BBC Radio Cymru
BBC ONE Wales
BBC THREE BBCi CBBC Channel
6 7 8
1
2 3 4
Select
Connect
EXIT Page up/down RETURN
To select the two or three-digit programme number, e.g. 39
Watching TV
up
down
or
Watching TV
Freeze / unfreeze picture
Hold
(in a short time)
Other useful functions (Operate after )
Change aspect ratio
Select
Change
EXIT
RETURN
Aspect selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1 Zoom2 Zoom3
Auto
Change the aspect ratio (p. 38)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
To change the mode
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
Display Aspect Selection list
During the list is displayed, select the mode
Store
Select a channel
3
2
Select DVB (Digital Video Broadcasting) or Analogue
Information banner
Mains power On / Off switch should be On.
(Press for about 1 second)
1
You can also select the mode using the TV button on the front panel of the TV.
Display subtitles
STTL
Display / hide subtitles (if available)
To change the language for DVB
“Preferred Subtitles” (p. 21) (If available)
Turn power on
Note
To watch pay-TV (p. 23)
To select from the Programme Guide
Display the current programme status
O
PTION
Check or change the current programme status instantly
To change
Subtitle Language (DVB mode)
Possible if the programme has some languages of subtitles
Multi Audio (DVB mode)
Possible if the programme has some languages of sounds
Teletext Language
Setup Menu (p. 21)
MPX (Analogue mode)
Sound Menu (p. 20)
Volume Correction
Adjusts volume of individual channel or input mode
Note
Also possible to change the settings in Menu list (p. 20 and p. 21).
select programme
watch
select page
select
change
Volume
Display information banner
1 BBS
23:35
Corontation Street
Bad Signal Encrypted
45
20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
Display programme information
Sound mute
To set display timeout
“Banner Display Timeout” (p. 21)
To hide
EXIT
Appears also when changing channel.
Information of another channel
Information on next programme
(DVB)
To watch the programme listed in the banner
Information banner operation
1st press Display banner
2nd press Banner + programme synopsis (DVB)
3rd press Exit
Weak TV signal
Scrambled broadcasting
Subtitle
Teletext
Stereo sound / multiple audio
Off timer
Features available
Programme
DVB: Programme
Start / Finish time
Analogue: Programme
Status
Channel Current time Category
To change the category
blue
Loading...
+ 15 hidden pages