Panasonic SV-AP10U User Manual

Digital Photo Printer

Operating Instructions

Model No. SV-AP10U

R

Before use, please read these instructions completely.
Please retain this manual for continuing reference.

For USA assistance. please call:1-800-211-PANA(7262) or send e-mail to:[e-mail]
For Canadian assistance. please call:1-800-561-5505 or visit us at www.panasonic.ca

VQT0B53

Information for Your Safety

WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
ONLY THE RECOMMENDED ACCESSORIES AND
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE THE COVER (OR
BACK); THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

pAs this equipment gets hot during use, operate it in a

well-ventilated place; do not install this equipment in a
confined space such as a book case or similar unit.

pDo not open the Ink Cassette Side Cover while

printing is in progress. Your fingers could be pinched
between the thermal head arms and the Ink Cassette.

IMPORTANT
Please respect all copyrights.
Whatever you have recorded and created can be u sed
for your personal entertainment only. Under
copyright laws, other materials cannot be used
without obtaining permission from the holders of the
copyrights.

®

pMicrosoft

Microsoft Corporation in the United States and other
countries.

pOther names, company nam es, and product names

printed in these instructions are trademarks or
registered trademarks of the companies concerned.

pAvoid using a cell phone near the Photo Printer because

doing so may cause noise to adversely affect the
picture.

Before opening the CD-ROM package, please read the
following.

Windows® is a registered trademark of

End User License Agreement

You (“Licensee”) are granted a license for the Software
defined in this End User Software Agreement
(“Agreement”) on condition that you agree to the terms
and conditions of this Agreement. If Licensee does not
agree to the terms and conditions of this Agreement,
promptly return the Software to Matsushita El ectric
Industrial Co., Ltd. (“Matsushita”), its distributors or
dealers from which you made the purchase.

Article 2 Use by a Third Party

Licensee may not use, copy, modify, transfer or allow any
third party, whether free of charge or not, to use, copy or
modify the Software, except as expressly provided for in
this Agreement.

Article 3 Restrictions on Copying the Software

Licensee may make a single copy of the Software in
whole or a part solely for back-up purpose.

Article 4 Computer

Licensee may use the Software only on one computer,
and may not use it on more than one computer.

Article 5 Reverse Engineering, Decompiling or
Disassembly

Licensee may not reverse engineer, decompile, or
disassemble the Software, except to the extent either of
them is permitted under law or regulation of the country
where Licensee resides. Matsushita, or its distributors will
not be responsible for any defects in the Software or
damage to Licensee caused by Licensee’s reverse
engineering, decompiling, or disassembly of the Software.

Article 6 Indemnification

The Software is provided “AS-IS” without warranty of any
kind, either expressed or implied, including, but not limited
to, warranties of non-infringement, merchantability and/or
fitness for a particular purpose. Further, Matsushita does
not warrant that the operation of the Software will be
uninterrupted or error free. Matsushita or any of its
distributors will not be liable for any damage suffered by
Licensee arising from or in connection with Licensee’s
use of the Software.

Article 7 Export Control

Licensee agrees not to export or re-export to any country
the Software in any form without the appropriate export
licenses under regulations of the country where Licensee
resides, if necessary.

Article 8 Termination of License

The right granted to Licensee hereunder will be
automatically terminated if Licensee contravenes of any of
the terms and conditions of this Agreement. In the event,
Licensee must destroy the Software and related
documentation together with all the copies thereof at
Licensee’s own expense.

Article 1 License

Licensee is granted t he right to use the software, including
the information recorded or described on the CD-ROM,
instruction manuals, and any other media provided to
Licensee (collectively “Software”), but all applicable rights
to patents, copyrights, trademarks and trade secrets in the
Software are not transferred to Licensee.

2

ENGLISH

ENGLISH

Important Information

FCC Note: (U.S. only)

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

pReorient or relocate th e receiving antenna.
pIncrease the separation between the equipment and

receiver.

pConnect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

pConsult the dealer or an experienced radio/TV

technician for help.

FCC Caution: To assure continued compliance,

follow the attached installation
instructions and use only shielded
interface cables with ferrite core when
connecting to computer or peripheral
devices.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.

The Preheat function works so that high picture quality is
maintained when the surrounding temperature is low.
Therefore, even if pressing the [PRINT] button, the
operation may not start for a while. (Printing starts within
about 1 minute automatically.)

If the temperature of the main unit increases when
performing multiple copying, printing pauses automatically
to lower the temperature and the printing time becomes
longer. However, this is not a malfunction with the product.
pIn the case of printing when using a personal computer,

the message [Please wait until the temperature of
printer decreases.] is displayed on the monitor of the
personal computer.

pIn the case of printing with using a memory card, the

message [Please wait until the temperature decreases.]
is displayed on the monitor of a TV.

When using the Photo Printer with a PC Card (Especially
Hard Disk Type card), temperature on the surface of the
card may rise and it may become hot. Turn off the power
and remove the card after a while.

Trade Name: Panasonic
Model No.: SV-AP10U
Responsible party: Matsushita Electric

Corporation of America One
Panasoni c Wa y, Secaucus , NJ
07094

Support Contact: Panasonic Consumer

Electronics Company
1-800-211-PANA(7262)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

This Class B digital apparatus complies with Canadian
ICES-003.

3

Supplied Accessories

Paper Cassette (VXA7602)

Remote Controller (N2QADB000006)

Stand for Vertical Layout (VYQ2551)

Feet for Horizontal Layout (VKA0376)

AA Size Batteries (x2)

AC Power Cord (K2CA2EA00002)

Video Cable (K1EA02BA0001)

Clamp Filter (x2) (Large Size) (for AC Power Cord and
optional USB Connection Cable)
(J0KG00000053)

CD-ROM (VFF0170)

Important Information
(Including USB Connection Cable (not supplied))

In order to prevent electromagnetic interference, install
the Clamp Filter (supplied) on the Cable as shown in the
figure below.
pAfter pa ssing the Cable through the Clamp F ilter and

looping it around once, close the Clamp Filter until it
clicks into place.
When you attach the Clamp Filter, be sure to attach it near

p

the side of the Cable connected to the main unit.

USB Connection Cable (Not supplied)

0.4 inch
(1 cm)

AC Power Cord (Supplied)

Clamp Filter (x1) (Small Size) (for Video Cable)
(J0KG00000036)

5.9 inch
(15 cm)

Video Cable (Supplied)

0.4 inch
(1 cm)

4

Contents

Information for Your Safety .................................2

End User License Agreement .............................2

Important Information..........................................3

Supplied Accessories..........................................4

Settings

Settings..............................................................29

Setting the Layout..............................................30

Preparation

Controls and Components...................................6

Inserting Remote Control Batteries.....................8

Using the Remote Controller...............................8

Insertion and Connections...................................9

Inserting a Card.................................................10

Inserting Paper..................................................10

Inserting the Ink Cassette..................................11

MENU Interface.................................................11

MENU Controls .................................................12

On Screen Display ............................................12

Basic Functions

Test Print...........................................................13

Switching the Pictures between

the Album Display and the Index Display..........15

To Enlarge/Reduce/Rotate/M ov e t he Picture....15

Printing Batches/Indexing..................................16

Using Date Search When Printing.....................16

Printing With a DPOF Marked Card..................17

Copying/Erasing Images from a Card ..............18

Recording Titles onto Cards..............................19

Erasing Titles From Cards.................................19

Viewing Slide Shows.........................................20

Connecting and Operating with a

personal computer

Operating environment......................................31

Installing the Printer Driver ................................32

Uninstalling the Printer Driver............................39

Printing from PC................................................40

Caution for Use..................................................43

Others

After Use............................................................44

Precautions........................................... .............44

Q&A...................................................................47

Before Requesting Service................................48

Error Messages.................................................50

Error Messages for Printer Driver......................51

Specifications.....................................................52

Limited Warranty (For U.S.A. Only)...................53

Customer Services Directory

(For U.S.A. Only)...............................................54

Instalación y conexiones (ESPAÑOL)...............55

Impresión de prueba (ESPAÑOL) .....................56

Multiple Functions

Printing Multiple Screen Shots of

the Same Picture (MULTI FRAME MODE).......21

Returning a Multiple Screen

to a Single Screen.............................................21

Printing Multiple Screen Shots of

Different Pictures...............................................22

Creating a Personalized Picture Calendar........24

Inserting Wallpaper and Printing.......................25

Title Functions

Inserting Illustrations and Printing.....................26

Switching Displays

(Indicate/Don’t indicate/Clear)...........................26

Inserting Characters and Printing ......................27

Print in Sepia Tone............................................28

5

Preparation

SET

¦

DISPLAY/
CANCEL

ERROR

PRINT

MENU

7 8

13

1
2

3
4

5

6

Preparation

Controls and Components

1 Power Lamp [¦]

When you turn the power on, the Power lamp
turns green. When you turn the power off, the
Po wer lamp turns red, and all images in the
Photo Printer’s memory are deleted.

2 Power Button [¦]

Press to turn Photo Printer on/off.

3 PRINT Button

Press this button to print images.

4 MENU Button

Use this button to display the menu screen.

5  Buttons/SET Button

 Buttons:

Use these buttons to select menu choices and
card images.

SET Button:

Use this button to enter various selections .

6 DISPLAY/ CANCEL Button

DISPLA Y Button:

Changes the picture display on a card among a
Single Screen Display, an Index Display and an
Album Display.

CANCEL Button:

Use to cancel printing and other such
processes.
Use to exit MENU.

7 Remote Control Receiver

Receives the signal from the remote controller.
Do not obstruct the remote control receiver in
order to avoid diffi cu lties using the remote.

8 Error Lamp

Flashes when an error has occurred.

15 16

EJECT

ACCESS

9

10

14

11

PC CARD

SD MEMORY CARD

12

9 Card Access Lamp

Lights while the Photo Printer is accessing data
on the Card.

10 PC Card Eject Button
11 SD Memory Card/MultiMediaCard Insert

Location

12 PC Card Insert Location
13 Paper Cassette Insert Location
14 Stand for Vertical Layout

Use the stand for v e rtical la yout.

15 Ink Cassette Eject Lever
16 Ink Cassette Insert Location
17 Power Socket

Connects the AC Power Cord (supplied).

18 Paper Removal Port
19 Cord Stopper

Fixes the AC Power Cord.

20 USB Socket

Connects the USB Connection Cable (not
supplied) to the USB Socket for PC.

21 VIDEO OUT Socket

Connects the Video Cable (supplied) to Video
Input Terminal of TV.

20
21

VIDEO

OUT

17
18

19

6

Preparation

Controls and Components (Cont.)

xRemote Controller

1

2
3

¦

CARD SELECT

PRINT

ALBUM

ROTATE

ZOOM IN

ZOOM OUT

SET

8
9

10

DISPLAY/

DATE

DPOF/ALL

PRINT

CANCEL

COPY

SELECT

MULTI

11
12

MENU

4
5

TITLE

NUMBER

6
7

11 MULTI (COPY) Button

Press this button to select numbers of multiple
screen shots of the same picture.

12 MULTI (SELECT) Button

Press this button to select numbers of multiple
screen shots of different pictures.

The buttons below have the same functions as
ones of the Photo Printer. (The same numbers
as the main unit are us ed.)
2 Power Button [¦], 3 PRINT Button, 4 MENU
Button, 5  Buttons, 5 SET Button, and

6 DISPLAY/CANCEL Button

1

Remote Control Transmitter

2 ALBUM Button

Press this button to change the scr een between
the Album Display and Index Display.

3 CARD SELECT Button

Press this button to change the input between
SD Memory Card or MultiMediaCard and PC
Card.

4 DA TE Button

Press this button to add the date when the
picture was taken in the lower right corner.

5 TITLE Button

Press this button to display the menu screen of
[FUNCTION].

6 NUMBER Button

Press this button to select the copies to print.

7 PRINT (DPOF)/PRINT (ALL) Button

PRINT (DPOF) Button:

Press this button to print the pictures that were
marked for DPOF.

PRINT (ALL) Button:

Prints all pictures when there are no pictures
indicated with DPOF setting.

8 ZOOM IN Button

Press this button to enlarge the picture and
characters.

9 ZOOM OUT Button

Press this button to reduce the picture and
characters.

10 RO T A TE Button

Press this button to rotate the picture and
characters.

7

Preparation





Inserting Remote Control Batteries

1 While pressing the indentation  in the

direction indicated by the arrow, lift the
cover up.

2 Insert the batteries (supplied) with the

polarity (

3 Cover is returned.

Precautions for Battery Replacement

The service life of the batteries is approximately 1 year.
However, it varies considerably depending on the
frequency of use.
pWhen they are exhausted, replace them with two AA,

UM3, or R6 size batteries.

pWhen the batteries are exhausted, remove them

immediately and dispose of them correctly.

pMake sure that the batteries are inserted with the

polarity (

pDo not mix old battery with new battery.
pDo not mix different battery types, i.e. Alkaline and

Manganese.

pDo not use rechargeable (Ni-Cd) batteries.
pDo not heat or short-circuit the batteries.
pWhen you do not use the remote control for a long time,

take out the batteries and store them in a cool, dry
place.

 and ) correctly aligned.









 and ) correctly aligned.

Using the Remote Controller

1 Direct the remote controller at the remote

control receiver
the remote controller.

pDistance fr om the Photo Printer: Within approximately

23 feet (7 m)

pAngle: W ithin approximately 40 degrees in the vertical

direction and 60 degrees in the horizontal direction from
the central axis

pDo not put an the obstruction between the Photo Printer

and remote controller.

pDo not expose the remote control receiver to direct

sunlight or strong light.

pWhen attaching the paper cassette, you cannot use the

remote controller from the right angle or lower right
angle.

pThe receiver range reverses between the Vertical and

Horizontal layout.

 and press a button on

CAUTION

Danger of explosion if battery is incorrectly
replaced.

Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.

8

Preparation

Insertion

Vertical Layout

Horizontal Layout

Connections

TV

Insertion and Connections

x Insertion

Be sure to insert the stand when selecting the Vertical layout and the
feet when selecting the Horizontal layout.

Insertion for Vertical Layout

1 Insert the stand into the holes as shown in the

illustration.

2 Tighten the screw to join the main unit and the stand.

Insertion for Horizontal Layout

1 Attach the feet for Horizontal Layout to the four corners

of the side which does not have a vent on the main unit.
(Attach them to the position of mark

pWhen detaching the feet, coating may be peeled off. Do not detach

them after attaching them.

pSelect [Vertical] or [Horizontal] under [Layout] after Insertion and

connections. (Initial setting: [Vertical])

pIf you do not select the [Layout] menu, the direction of operation of the

Cursor buttons will be different when using with the Horizontal layout.

x Precautions During Setup



As this printer gets hot during use, operate it in a well ventilated area.
Place printer at least 4" (10 cm) away from any walls to the left, right,
above or rear of printer. Do not place any objects on top of printer.

x Connections

For Connection to TV

1 Connect the AC Power Cord (supplied) with the main

unit and AC outlet with the cord hooked to the cord
stopper.

1

2 Connect the Video cable (supplied) to [VIDEO OUT]

Socket on main unit and the Video Input Socket on TV.

pAfte r connect ions, tur n on the Phot o Printer and TV, and switch the

input to the video input.

.)

PC

For Connection to PC

2

1 Connect the AC Power Cord (supplied) with the main

unit and AC outlet with the cord hooked to the cord
stopper.

2 Connect the USB Connection Cable (not supplied) to the

USB Socket on main unit and the USB Socket on PC.

pYou can purchase a generic USB A-B cable to use with this product at

many consumer electronic retail outlets.

pAfte r c onnections, see page 31.

THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE

.

1

x Paper That Can Be Used For Printing

The Photo Printer can use the following types of paper. Use Ink
Cassette/Paper Sets that bear the mark. (Print Sets that bear the

n mark, the o mark, or no mark at all cannot be used.)
p4" x 5-7/8" (100 x 148 mm) print ing pape r* *with borders: The Ink

2

Cassette/Paper Set VW-APA50 is required.

p16 Pre-Cut Adhesive paper (overcoat type): The Ink Cassette/Paper

Set VW-APASD16 is required.

p4" x 6" (10 0 x 150 mm) printing paper* (overcoat type) *without

borders: The Ink Cassette/Paper Set VW-APKC36 is required.

pUse th e Ink Cassette with the paper provided in the same box.

9







Preparation

Inserting a Card

x When using an SD Memory Card or a

MultiMediaCard

1

Insert the card all the way into the slot.

pThe Card Access Lamp lights.

[Removing the Card]

1 Push the card.
2 Remove the card.

x When Using a PC Card
1

Insert CF Card all the way into  (PC Card Adaptor/
Product Sold Separately).

2 Insert  into the Photo Printer.

[When Removing the Card Adaptor]

1 Press .
2 Remove .

pNever take the card out or turn off the power while the card is being

accessed. This could damage the format of the card and make it
unusable.

pInsert/remove cards only when the power is off.
pCard images are formatted as JPEG baselines (JFIF, EXIF, DCF

[Design rule for Camera File system], CIFF, SISRIF) TIFF (Baseline
TIFF Rev.6.0R GB Full Color Images compatible).
The following types of cards can be used:
Compact Flash, IBM Microdrive, Memory Stick and Smart Media.

pDo not insert/remove the card with the card adaptor inserted.













Inserting Paper

1 Open the lid of the paper cassette (included) , spread

out

, and stand up (or push down) .

pWhen using 4" x 5 -7/8" (100 x 148 mm) printing paper or 16 Pre-

Cut Adhesive printing paper, spread

pWhen using 4" x 6" (100 x 150 mm) printing paper, spread

push down

.

2 Face the white (print) side of the paper up, and insert

under

 (is the perforation line).

3 While opening the paper cassette door  and pushing

the Photo Printer with your hand, insert the paper
cassette all the way into

pInsert up to 25 sheets of 4" x 5-7/8" (100 x 148 mm) printing paper, or

up to 36 sheets of the other types of paper.

pDo not pull out the paper cassette during printing.
pPull out the paper cassette and close the paper cassette door after

use.

pDo not fold, bend, or turn paper upside down when inserting into

printer.

pIf you do not insert the paper cassette all the way, when pressing the

[PRINT] button, the error message “There is no paper cassette” will be
displayed on the monitor connected to the unit.

.

, and stand up .

, and

10

Preparation

1

2











Inserting the Ink Cassette

1 Use your finger to push in the hole with the arrow, and

turn it in the direction of the arrow.
Tighten any slack in

pThe Ink Cassette is included in the Ink Cassette/Paper Set

(optional).

2 Open  (Ink Cassette Compartment Door), place the

side that contains
insert the Ink Film all the way into the Ink Cassette,and
close

.

pDo not touch the Ink Film in the Ink Cassette, and do not pull it out of

the cassette.

pClose the Ink Cassette Compartment Door.
pDo not peel off the label on the Ink Cassette.
pWhen all of the Ink film in an Ink Cassette has been used up, replace

the Ink Cassette with a new one. Used Ink Cassettes cannot be
reused.

 (Ink Film).

 (small hole in Ink Cassette ) up,

12

BASIC

FUNCTION

A

EFFECT

OPTION

Input

Batch

DPOF

DPOF

SlideCardAlbum

Search

3

MENU Interface

1 MENU Categories

The Photo Printer is divided into 4 major categories.

2 MENU Contents

Select the specific MENU you desire here.

3 Description/Control Display

The selected MENU’s description as well as control
confirmation messages are displayed in this area.

11

Preparation





PRINT

MENU

BASIC

FUNCTION

A

EFFECT

OPTION

SET

DISPLAY/
CANCEL

Input

Batch







DPOF

DPOF

SlideCardAlbum






Search

PRINT

MENU

SET

DISPLAY/
CANCEL

ERROR

MENU Controls

Use the MENU Mode as follows.

:Press



:Use the  Buttons

 to display the MENU screen.

 to switch between MENU categories and

MENU contents.
:Use the  Buttons
enter your selection, press

:Press
:Press

 to enter your selection.
 to exit the MENU.

 to move within the MENU Contents. To

.

On Screen Display

The screen display disappears after a few seconds, but appears again
when pressing the  Buttons.

Standard x1

SD/MMC

DATE

PC CARD

1/39

SET: Zoom set up

1 Number display
2 Date display
3 Input display

12

Basic Functions





CARD SELECT

PRINT

MENU

ZOOM OUT

ROTATE

SET

DISPLAY/
CANCEL

Basic Functions




1

2

4

1

2

BASIC

FUNCTION

EFFECT

OPTION

Layout

SFTWT SM

13
20
27

A

14
21
28





Number Date

Layout

15

16

22

23

29

30 31

7

7

5

5

3

3

365421

2

Horizontal

121110987
1926172418

25





Vertical

PRINT

MENU

ERROR

Test Print

pThe explanations below are made for the Ver tical layout and the Album

Display setting.

SET

DISPLAY/
CANCEL



x Printing Images From a Card

pMa ke sure that the paper, the Paper Cassette and the Ink Cassette are

all inserted.

pInsert a card into the Photo Printer.
pTurn on the power.

Picture

Tri m

1 Select [Layout] under [OPTION] on the MENU screen,

and press

2

Select [Vertical] or [Horizontal], and press .

3

Press  (CARD SELECT Button).



(SET Button).

4 Using the  Buttons, selectthe date you wish.

Selected date: Yellow
Date with the picture: Light Blue

5 Using  (DISPLA Y Button), change to the Index Display

and using the  Buttons, align
over the image you wish to print.

pYou can enlarge, reduce and rotate the picture here. (P15)

 (blue frame)

6 Pressing changes to a Single Screen Display.
7 Press(PRINT Button).

pPrinting begins.
pThe “L” symbols all change to “~” symbols. Once they disappear,

printing is complete.

5

7

3

4



BASIC

FUNCTION

EFFECT

OPTION

Input

To Operate with the Buttons on the main unit

1 Select [Layout] under [OPTION] on the MENU screen,

and press

2

Select [Vertical] or [Horizontal], and press .

3

Select [Input] under [BASIC] on the MENU screen, and
press



(SET Button).

(SET Button).

4 Using the  Buttons, select [SD/MMC] or [PC card],

and press

pGo to Step 5 on the operations with the remote controller after the

operations above.

pSome images on the display may be unsteady depending on the card

DPOF

Input

Batch

DPOF

Search

A

SlideCardAlbum

SD/MMC

PC card

being used. If “The picture is unreadable.” or “Th e car d c an’t be used.”
error message appears, or if an “x” symbol appears even though the
image is stored, turn off the power, remove the card and re-insert it.

pA white border m ay appear around the card’s image, but this will not

affect the printed image.

pDo not pull out the paper when moving during printing. Do not remove

the paper cassette or the Ink Cassette.

pDo not leave 11 or more printing papers on the receiving position to

avoid causing a paper jam.

pIt may take some time until the picture is displayed depending on the

card.

pThe picture on the TV s creen may flicker depending on the card.

However it does not affect the printing of the image.

pWhen saving the picture file on PC, the saved date is displayed.
pIt may take longer to print two or more sheets or print in low or high

temperatures.

(SET Button).

13

COPY

SELECT

DATE

NUMBER

PRINT

MENU

TITLE

DPOF/ALL

SET

DISPLAY/
CANCEL



Basic Functions

x Forwarding/Reversing the Screen

When 13 or more images are recorded on a card, aligning  (blue
frame) on the places indicated in the diagram to the left and pressing the
 Buttons will forward/reverse the screen.



1234
5678
9101112

1234
5678
9101112







x Reprinting the Image

Press  to make the Index Display appear after printing is complete
and the Album Display appears and then press the PRINT Button



after selecting the picture in the blue frame.
pIf inserting a different Ink Cassette before reprinting when using a card,

re-select the image.

13

x Printing Multiple Copies of a Single Image
1

Press  (NUMBER Button) when the picture is
displayed.

pThe number of print s increases when pressing .
pThe Photo Printer can continuously print up to 10 copies of the same

image.

13

14

16

15

17

18

20

19

22

21

24

23

pThe number of pages remaining to be printed (including the currently

printing page) appears in the lower left corner of the screen.

To Operate with the Buttons on the main unit
See page 29.

x Paper Jams

pIf a “Paper jam has occurred. Remove paper and press [PRINT]” error



message appears. Remove paper out of the left side

, and remove the Ink Cassette. Make sure no more paper is

side
stuck inside, then re-insert the Ink Cassette. Press the Print button.
The error message will disappear and printing will continue.

pIf you have trouble removing the paper, turn the power off, and then

back on again. Proceed to remove the paper from either or.

pIf the paper stop s m oving dur ing print even though no error messages

appear, do not remove the paper. Wait for printing to resume
automatically.

or the right



14

CARD SELECT

PRINT

ZOOM IN

¦

ALBUM

ZOOM OUT

ROTATE

SET

MENU

CARD SELECT

PRINT

MENU

ZOOM IN

¦

ALBUM

ZOOM OUT

ROTATE

SET

DISPLAY/
CANCEL

Basic Functions

Switching the Pictures between the Album
Display and the Index Display



1

SET



You can display the pictures where a date has been recorded in the
Album Display.

DISPLAY/
CANCEL

1 Press  (ALBUM Button) when the pictures are

displayed.

SFTWT SM

365421

121110987

13

1926172418

14

15

16

20

25

21

22

23

27

28

29

30 31

pThe pictures can be also switched between the Album Display and

the Index Display when pressing

.

To Operate with the Buttons on the main unit

1 Select [Album] under [BASIC] on the MENU screen,

1

2

BASIC

FUNCTION

EFFECT

OPTION

Album

and press

DPOF

Input

Batch

DPOF

Search

A

SlideCardAlbum

Display

Don't display

2 Using the  Buttons, select [Indicate] or [Don’t

indicate], and press

pWhen saving the picture file on PC, the saved date is displayed.

.

.



1

2








PRINT

MENU

SET

DISPLAY/
CANCEL

ERROR

To Enlarge/Reduce/Rotate/Move the Picture

pSelect the INPUT method.
pMake the picture appear in the Single Screen Display.



1 Press  (ZOOM IN Button) to enlarge the picture.

pThe picture can be enlarged up to 3 times.

2 Press  (ZOOM OUT Button) to reduce the picture.

pThe picture can be reduced up to 1/2 the size.

3 Press  (RO T A TE Button) to rotate the picture.

pThe picture can be rotated by 90 degrees clockwise whenever the

button is pressed.

4 Using the  Buttons, move the picture after

enlarging/reducing/rotating or pressing

To Operate with the Buttons on the main unit

1 Press.
2 Using the  Buttons, move the picture.
3 Press.
4 Using the  Buttons, rotate the picture and using

the  Buttons, enlarge or reduce the picture.

pPressing  returns to Step 2.

.

3

pMa ke the picture appear in the Index Display and then make the same

picture appear again with the [DISPLAY] button.

pWhen the picture is enlarged

using the ZOOM IN button, the

picture quality may be inferior.

pYou cannot enlarge, reduce, rotate or move the picture when setting to

the multi select display or the calendar display.

15

Basic Functions

PRINT

MENU

SET

DISPLAY/
CANCEL

PRINT

MENU

SET

DISPLAY/
CANCEL

1

2








BASIC

FUNCTION

EFFECT

OPTION

Batch



Input

Batch

A



All pictures

Selected pictures

Selected date

Selected index
Selected date index
Clear selected mark

DPOF

DPOF

SlideCardAlbum

All index

PRINT

MENU

Search

SET

DISPLAY/
CANCEL

ERROR








Printing Batches/Indexing

Multiple pictures can be automatically printed from a card.
Furthermor e, 25 frames of images on a card can be indexed and printed.

pSelect the INPUT method.
pIf you select all pictures, begin from Step 2.

1 Select the pictures, and mark them with (q).
2 Select [Batch] under [BASIC] on the MENU screen, and

press

Select a MENU you wish to use, and press

Print a batch of all pictures.
Print a batch of selected pictures.
Print a batch of selected pictures with the Album function.
Index all pictures.
Index selected pictures.
Print a batch of Index selected pictures with the Album function.
Clear a batch of selected pictures.

pPress

pYou can print a batch of pictures when also pressing [PRINT (DPOF/

ALL)] Button. (When you insert cards that are marked by DPOF, only
the pictures for which DPOF setting were made are printed.)

pPictures will be printed in the order selected.
pWhen using [Selected pictures],(

is complete. When using [Selected index], marks will not disappear
after printing.

pAll pictures stored to memory will be lost if the power is turned off.
pIf [With date] is selected under [Date], the date will appear on all

indexed pictures. However, dates cannot be verified on the TV Screen.

.

.

to cancel.

q) mark will disappear when printing

 

1

2

BASIC

Input

FUNCTION

A

EFFECT

OPTION



Search

3

Batch

Year
Month
Date

Year
Month
Date



DPOF

DPOF

SlideCardAlbum

2002

:

October

:
:

2002

:

October

:
:

PRINT

MENU

ERROR

Using Date Search When Printing

Dates are recorded for pictures that were recorded on cards with Digital
Movie Cameras or Digital Cameras. Using this information, pictures

SET

DISPLAY/
CANCEL



taken on the designated date(s) can be printed.

pSelect the INPUT method.

1 Select [Search] under [BASIC] on the MENU screen, and

Search

press

2 Enter the period you wish to search (Begin Search Date/

End Search Date), and press

 Buttons: Change the Date
 Buttons: Move the Cursor

pYears can be entered from 1980 to 2040.

.

.

3 Confirm the pictures you found (q) in the lower right

1

30

corner, and press

.

pA batch of the searc hed pictures is printed.

pIf no images could be found within the designated search period, a “A

picture wasn’t found.” message will appear.

pTo print all images that were found as a batch, return to the MENU

screen and select [Selected pictures], under [Batch] in [BASIC].

pThe sele cted pictures can also be viewed as a Slide Show.
pWhen searching the date on the Album Display, the screen switches to

the Index Display.

pWhen saving the picture file on a PC, the saved date is displayed.

16

Basic Functions

COPY

SELECT

MULTI

DATE

NUMBER

TITLE

PRINT

DPOF/ALL



1

2

BASIC

FUNCTION

EFFECT

OPTION

DPOF

DPOF

PRINT

MENU

ERROR

Printing With a DPOF Marked Card

When a card with marked files (DPOF) that contains pictures and print
counts set with a Digital Video Camera or a Digital Camera is inserted,



SET

DISPLAY/
CANCEL

printing can be automatically be performed.

pInsert a DPOF card
pSelect the INPUT method

1 Press  (DPOF Button) when the pictures are

displayed.

DPOF

Input

Batch

DPOF

Search

A

SlideCardAlbum

Start printing

Return

pPrinting begins.

DPOF stands for Digital Print Order Format. Using a Digital Video
Camera or a Digital Camera, this adds printing information to stored
pictures on cards so they can be applied to DPOF systems.

pWhen you insert a card for which DPOF setting is not made, all the

pictures are printed by pressing [PRINT (DPOF/ALL)] Button.

pThe Photo Printer cannot configure DPOF.
pConfirm settings on the equipment on which the settings were made.
pSetting the print count in [Number] under [OPTION] will have no effect.

Only the DPOF configured print count will be printed.

pIf 100 or mo re c opies are set to be printed on the DPOF settings, only

99 will be printed.

pIf you do not use the DPOF-configuring device to set the date on cards,

it cannot be entered even when printing a batch of pictures.

To Operate with the Buttons on the main unit

1 Select [DPOF] under [BASIC] on the MENU screen,

and press

.

2 Using the  Buttons, select [Start printing] or

[Return], and press

.

17

Basic Functions

PRINT

MENU

SET

DISPLAY/
CANCEL

1

2

3





FUNCTION

EFFECT

OPTION

Card

Card

BASIC

MENU

Copying/Erasing Images from a Card

Images can be mutually copied to or erased from SD Memory/



SET

DISPLAY/
CANCEL



MultiMediaCards and PC Cards.

pUnlock the card when inserting the SD Memory Card.
pInsert the card to both insert locations when copying the picture.
pSelect the card that contains the images you wish to copy or

DPOF

Input

Batch

DPOF

Search

A

SlideCardAlbum

erase in the INPUT method.

1 Select [Card] under [BASIC] on the MENU screen, and

press

.

2 Select [Picture], and press .
3 Select either [Copy] or [Delete], and press .

Picture

Title

Copy

Delete

pSelect the date, and press .

4 Select an image, press , confirm the screen, and press

 again.

pP ress to cancel.
pImages will be permanently deleted.
pMu ltiple copies of images cannot be selected at one time.
pYou cannot copy or erase the picture and title simultaneously.
pDo not pull out card during copying or erasing.
pYou cannot copy or erase the locked picture. Unlock the picture on the

equipment which locked it.

pYou cannot copy the picture to the card if there is no space left.

4

18