Panasonic SC-XH160, SC-XH60, SC-XH100 User Manual

Operating Instructions

2 ALL

3 ALL

5 ALL

DVD Home Theater Sound System

Model No. SC-XH160

SC-XH100

SC-XH60

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

The illustrations shown may differ from your unit.

Region number The player plays DVD-Video marked with labels containing the region number or “ALL”.

Region Number Example

The Middle East and South Africa 2

Southeast Asia 3

India 5

This illustration shows SC-XH100.

[GA] [GS] [GW]

RQT9801-B

Indicates features applicable to:

For India

For Southeast Asia, the Middle East and South Africa

For the Middle East and South Africa

Figure A Figure B

Fuse cover

Figure A Figure B

Fuse (5 ampere)

[XH160] : SC-XH160 only [XH100] : SC-XH100 only [XH60] : SC-XH60 only

System SC-XH160 SC-XH100 SC-XH60 Main unit SA-XH160 SA-XH100 SA-XH60 Speaker system Front speakers SB-HF75 SB-HF1001 SB-HF1001

Center speaker SB-HC1001 SB-HC1001 SB-HC1001 Surround speakers SB-HS75 SB-HS75 SB-HS75

Subwoofer SB-HW20 SB-HW20 SB-HW600

≥ These operating instructions are applicable to models SC-XH160, SC-XH100 and SC-XH60 for a variety of regions. Unless

otherwise indicated, illustrations in these operating instructions are of SC-XH100.

≥ Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit

if the controls are the same.

Accessories

Please check and identify the supplied accessories.

∏ 1 Remote control

(N2QAYB000853)

∏ 1 Remote control battery

∏ 1 FM indoor antenna

∏ 1 Video cable

∏ [XH160] [XH100]

1 HDMI cable

∏ 2 Sheets of speaker cable stickers

∏

1 AC mains lead

2 AC mains leads

∏ Speaker cables

[XH160]

≥1 short cable ≥2 long cables

[XH100] [XH60]

≥3 short cables ≥2 long cables

∏ [XH160] 2 Speaker stands (with cable)

∏ [XH160] 2 Bases

∏ [XH160] 8 Screws

(When using the moulded three pin mains plug) How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

RQT9801

RETURN

VOL

STOP

VOL

INPUT

SKIP

SLOW

PAUSE

PLAY

DVD

USB

EXIT

–REPEAT

PLAY MODE

SOUND

SURROUND FL DISPLAY

1 2 3 4 5 6

7 809

1010

CANCEL

FUNCTIONS

MUTE

SKIP

–SLEEP

RADIO

EXT-IN







 















 

















CH SELECT

–W.SRD



The circled numbers indicated in the operating instructions (e.g. Press [Í]1) correspond to the circled numbers in the above.





 

RQT9801



MUSIC PORT

1-MIC-2

VOL



Control reference guide

Remote control

1 Turn the main unit on/off (B 9) 2 Select channels and title numbers etc. / Enter numbers

(B 10, 12)

3 Cancel (B 13) 4 Source select

[DVD]: Select disc as the source (B 12) [USB]: Select USB as the source (B 16) [EXT-IN, RADIO]:

5 Basic operations for play (B 12) 6 Show on-screen menu (B 14) 7 Show a disc top menu (B 13) 8 Select or confirm menu items / Frame-by-frame (B 12) 9 Select the play mode / Set the repeat mode : Select sound mode / Turn Whisper-mode Surround on/off

(B 12)

; Select surround sound effects (B 11)

Set the Sleep timer

Press and hold [jSLEEP]. While the time is shown on the main unit’s display, press [jSLEEP] repeatedly.

Each time you press the button:

SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120

^-------------------------- OFF (Cancel) (------------------------}

≥ To confirm the remaining time, press and hold the button again.

< TV operations

Aim the remote control at the Panasonic TV and press the button. [TV, Í]: Turn the TV on/off [INPUT, AV]: Change the TV’s video input mode [r, VOL, s]: Adjust the TV volume This may not work properly with some models.

= Adjust the volume of the main unit > Mute the sound

≥ “MUTE” flashes on the main unit’s display while the function is on. ≥ To cancel, press the button again or adjust the volume. ≥ Muting is cancelled when you switch the unit to standby.

? Select radio stations manually (B 10) @ Select preset radio stations (B 10) A Exit the display B Show START menu (B 10) C Show a disc menu (B 13) D Return to previous screen (B 13) E Switch information on the main unit’s display (B 13) F Select speaker channel (B 12)

Select the FM tuner or the external audio as the source (B 10) FM # AUX # ARC

^------------------------------}

(B 13, 14)

Avoiding interference with other Panasonic equipment

Other Panasonic audio/video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press [EXT-IN]4 to select “AUX”. 2 Press and hold [< OPEN/CLOSE]2 on the main unit and [2] on the

remote control until the main unit’s display shows “REMOTE 2”.

3 Press and hold [OK]8 and [2] on the remote control for at least 2

seconds. To change the mode back to “REMOTE 1”, repeat the steps above by replacing [2] with [1].

Main unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Open/Close the disc tray (B 12) 3 Disc tray 4 Remote control signal sensor 5 Display (FL display) 6 Connect USB device (B 16) 7 Adjust the volume of the main unit

POWER-SAVING FEATURES

The main unit is designed to conserve its power consumption and save energy.

∫ Auto power-down function ≥The main unit will automatically switch to standby mode

after 30 minutes of inactivity. e.g. – There is no audio signal from an external device. – Media playback is stopped/paused. – The disc menu is displayed and play is not selected.

(This function may not work depending on the application type of discs.)

≥When the main unit is turned back on, “POWER ON FROM

AUTO POWER DOWN MODE” appears on the main unit’s display.

RQT9801

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4

POWER-SAVING FEATURES. . . . . . . . . . . . . . . . . . . . .4

step 1 Preparing the speakers . . . . . . . . . . . . . . . . . 6

step 2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

step 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Speaker connections. . . . . . . . . . . . . . . . . . . . . .7

Radio antenna connection. . . . . . . . . . . . . . . . . .8

Audio and video connections . . . . . . . . . . . . . . .8

step 4 AC mains lead connection. . . . . . . . . . . . . . . 9

step 5 Preparing the remote control . . . . . . . . . . . . 9

step 6 Easy setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Listening to the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 10

Listening to a preset channel . . . . . . . . . . . . . . . . . . . . . . . 10

Using the START menu . . . . . . . . . . . . . . . . . . . . . . . . . .10

Selecting the source using the remote control . . . . . . . . . .10

Listening to the TV or other device’s audio from this

unit’s speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Enjoying sound effects from all speakers

Enjoying surround sound effects. . . . . . . . . . . . . . . .11

Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . .12

Whisper-mode Surround. . . . . . . . . . . . . . . . . . . . . . .12

Adjusting the speaker level during playback . . . . . .12

Adjusting the front speaker balance

during playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Playing Discs

Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Playing from the selected item. . . . . . . . . . . . . . . . . . . . 13

Other modes of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Program and Random play . . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 14

Other Operations

Linked operations with the TV

(VIERA Link “HDAVI Control

Setting the audio link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Easy control only with VIERA remote control . . . . . . . . . . 16

Playing from an USB device. . . . . . . . . . . . . . . . . . . . . . 16

”) . . . . . . . . . . . . . . . . 15

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . . 16

Media that can be played . . . . . . . . . . . . . . . . . . . . . . . . 18

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Safety precautions. . . . . . . . . . . . . . . . . . 24

Getting StartedPlaying DiscsOther OperationsReference

RQT9801

step 1 Preparing the speakers

Make sure you have all the indicated components before starting assembly, setup, and connection.

≥ Keep the screws out of reach of children to prevent swallowing. ≥ For optional wall mount, refer to page 19.

2 Bases 8 Screws2 Front speakers 2 Stands (with cable)





















Slide into the groove.

Tighten securely.

Position the cable between the ridges.

Leave about 120 mm.

Press into the groove.

Tighten securely.

Insert the wire fully.

i: White j: Blue line

Push!









Leave about 120 mm.

You can remove and use the cable from the stand. To reattach the cable, refer to page 20.

Slide into the groove.

Press into the groove.

Tighten securely.

Insert the wire fully.

i: White j: Blue line

Push!

Thread the speaker cable through the base.

Attach the speaker.

String (not supplied)

Thread from the wall to the speaker and tie tightly.

Speaker (rear)

Screw eye

(not supplied)

Approx. 150 mm

Wall

[XH160] Front speakers

Preparation

≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers. ≥ For assembly, use a Phillips-head screwdriver (not supplied).

Speaker assembly option

Preventing the speakers from falling

≥ You will need to obtain the appropriate screw eyes to match the walls or

pillars to which they are going to be fastened.

≥ Consult a qualified building contractor concerning the appropriate

procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall and speakers, and personal injury.

≥ Use a string of less than ‰2.0 mm, which is capable of supporting over

10 kg.

RQT9801

Caution

≥ Do not stand on the base. Be cautious when children are near. ≥ When carrying the speaker, hold the stand and base parts.

step 2 Positioning

120°

60°

Center speaker

§2

Front speaker (left)

Subwoofer

§3

Surround speaker (left)

Surround speaker (right)

Front speaker (right)

Main unit

§1





e.g., Surround speaker (L)

Speaker cable stickers

Long cable



e.g.

FRONTFRONT

SURROUNDSURROUND



SUBWOOFERSUBWOOFER

CENTERCENTER

Main unit (rear)

White

Blue line

White

Blue line

Push!

Surround speaker (L)

Push!

i: White j: Blue line

How you set up your speakers can affect the bass and the sound field. Note the following points:

≥ Place speakers on flat secure bases. ≥ Keep your speakers at least 10 mm away from the system for proper

ventilation.

≥ Placing speakers too close to floors, walls, and corners can result in

excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 19.

Setup example (“Surround layout (Recommended)”: Standard surround placement) Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate.

§1 Position with at least 5 cm of space on all sides for proper ventilation.

§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt

the picture if it is placed directly on the TV.

§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm from the TV.

Depending on the room layout, you may like to use all the speakers at the front (“Front layout (Alternative)”) (B 9, Easy setup).

Notes on speaker use

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be negatively affected.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound. – When the speakers are reverberating due to a record player, noise

from FM broadcasts, or continuous signals from an oscillator, test

disc, or electronic instrument. – When adjusting the sound quality. – When turning the unit on or off.

≥ These speakers do not have magnetic shielding. Do not place them

near a TV, PC, or other device that is affected by magnetic fields.

≥ Keep magnetized items away. Magnetized cards, watches, etc., can be

damaged if placed too close to the speaker.

Caution

≥ The main unit and supplied speakers are to be used only as

indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Do not attempt to attach these speakers to walls using methods

other than those described in this manual.

step 3 Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are completed.

Speaker connections

Cable type Speakers

(Attached to

subwoofer)

Subwoofer 6

Short Center speaker 5 CENTER / CENTRE

[XH160] (Supplied with the speaker

Front speaker (R) 2

stand)

[XH100] [XH60]

Short

Long

Front speaker (L) 1

Surround speaker (R) 4

Use of the speaker cable stickers is convenient when making cable connections.

SUBWOOFER /

ENCEINTE

D’EXTRÊMES-

GRAVES

FRONT /

AVANT

SURROUND /

AMBIOPHONIESurround speaker (L) 3

SURROUND



SURROUND

Lch

Verify the type of speaker with the label on the speaker before connecting the appropriate cable.

Connect the speaker cables to the appropriate speakers by referring to the above table. Insert the wire fully, taking care not to insert beyond the wire insulation.

Be careful not to cross (short circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

SURROUND

Lch

Getting Started

RQT9801

Radio antenna connection

FM ANT

(75 )

Main unit (rear)

Affix this end of the antenna to a wall or pillar where the reception is best.

FM indoor antenna

(supplied)

HDMI (ARC) AV OUT

HDMI (ARC)

OUT

(ARC)

HDMI cable

§2

Main unit (rear)

Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.)

HDMI cable

§2

Audio cable

(not supplied)

Main unit (rear)

VIDEO OUT

AUX

Main unit (rear)

Audio cable

(not supplied)

Video cable

(supplied)



Use an FM outdoor antenna if radio reception is poor.

Audio and video connections

≥ To listen to the TV audio on the sound system, connect the HDMI§1

cable or audio cable. Refer to the operating instructions of the respective devices for the settings necessary to output the audio.

§1 Only when connecting to an ARC compatible TV. Refer to “Connection with an ARC compatible TV” for details. (B right)

Recommended connection to a TV

This connection provides the best picture and audio quality.

VIERA Link “HDAVI Control”

If your Panasonic TV is VIERA Link compatible, you can operate your TV synchronising with home theater operations or vice versa (B 15, Linked operations with the TV).



≥ Use the ARC compatible High Speed HDMI cables. Non-HDMI-compliant

cables cannot be utilised. [XH160] [XH100] The HDMI-compliant cable is supplied with this unit. Do not use any other HDMI cables except the supplied one.

≥ It is recommended that you use Panasonic’s HDMI cable. When outputting

1080p signal, please use HDMI cables 5.0 meters or less.

≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be displayed properly.

≥ After connecting with the HDMI

audio from your digital equipment (B 11). (Only Dolby

Digital and PCM can be played with this connection.)

cable, make settings to suit the type of

∫ Connection with an ARC compatible TV

What is ARC?

ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. It refers to one of the HDMI functions. If the TV is ARC compatible, audio from the TV can be sent to this unit via the HDMI cable without the need to make an extra audio connection.

≥ Refer to the operating instructions of the TV for details.

∫ Connection without an ARC compatible TV

AV IN

AUX

OUT

HDMI AV OUT

(ARC)

RQT9801

§2 [XH160] [XH100] : supplied [XH60] : not supplied

Alternative connection to a TV



If you have various sound sources (such as Blu-ray Disc player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV output should then be connected to the AUX or HDMI AV OUT terminal of the main unit.

+ 18 hidden pages