The player plays DVD-Video marked with labels containing the region
number “2” or “ALL”.
Example:
2ALL
2
3
5
OPEN CLOSE
Operating Instructions
DVD Home Theater Sound System
Model No. SC-PTX5
SELECTOR
TUNING
High-quality picture
HDMI capability, Advanced
progressive scan and more.
6
Dolby Virtual Speaker
Enjoy surround sound effect
with a variety of sources.
29
USB connectivity
31
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
E
RQTX0022-B
Dear customer
∏
∏
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully.
Operations in these instructions are described mainly with the
remote control, but you can perform the operations on the main
unit if the controls are the same.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
SystemSC-PTX5
Main unitSA-PTX5
Front speakersSB-HFX5
SubwooferSB-HW750
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE,
≥
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
≥
USE ONLY THE RECOMMENDED ACCESSORIES.
≥
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
Accessories
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
≥
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT
IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.
≥
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
≥
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
≥
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily
accessible.
The mains plug of the power supply cord shall remain readily
operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
(Side of product)
(Inside of product)
(Produktets innside)
(Tuotteen sisällä)
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
Accessories
Please check and identify the supplied accessories.
This unit comes equipped with a Dolby Virtual Speaker circuit installed. Using just the supplied speakers and the subwoofer, and by reproducing
acoustic effects very similar to 5.1ch surround, you can enjoy a true “home theater” experience even within a limited space.
How you set up your speakers can affect the bass and the sound field. Note the following points:
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
Simple Setup
]Note]
≥ Keep your speakers at least 10 mm away from the system for proper ventilation.
Setup example
Subwoofer
Positioning
Place to the right or left of
the television, on the floor
or a sturdy shelf so that it
will not cause vibration.
Leave about 30 cm from
the television.
Front speakers
Notes on speaker use
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
≥ Left and right speakers are
interchangeable.
≥ To avoid damage to the
speakers, do not touch the
speaker cones if you have
taken the nets off.
60º
Main unit
OPENCLOSE
SELECTOR
SA-PTX3
To allow for proper ventilation and to
maintain good airflow around the main
unit, position it with at least 5 cm of
space on all sides.
TUNING
MUSIC PORT
If irregular colouring occurs on your television
The front speakers are designed to be used close to a television, but the
picture may be affected with some televisions and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The demagnetizing function of the television should correct the problem.
If it persists, move the speakers further away from the television.
Caution
≥ The main unit and supplied speakers are to be used only as
indicated in this setup. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
≥ Do not attempt to attach the speakers to walls or ceilings.
DO
NOT
RQTX0022
DO
4
step
2
Cable connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker connections
1
DO
NOT
3
1
1
R
Main unit
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the
speakers.
FRONT (R)
Insert the wires, taking
2
care not to insert beyond
the wire insulation.
L
Insert the
wire fully.
i: White
j: Blue
(4106
6
Push!
Main unit
R
57$911('4
L
2
FM ANT
75
i: White
6
j: Blue
Insert the wires correctly.
FRONT (L)
SUBWOOFER
Simple Setup
Cable connections
Radio antenna connections
2
FM indoor antenna
(included)
Affix this end of the
antenna where
reception is best.
Main unit
FM ANT
75
Adhesive tape
Using an FM outdoor antenna (optional)
Use outdoor antenna if radio reception is poor.
≥ Disconnect the antenna when the unit is not in use.
≥ Do not use the outdoor antenna during an electrical storm.
Main unit
FM ANT
75
75 ≠ coaxial cable
(not included)
FM outdoor antenna
[Using a television antenna (not included)]
≥ Disconnect the FM indoor antenna.
≥ The antenna should be installed by a
competent technician.
(Continued on next page)
RQTX0022
5
step
2
Cable connections
3
AV
Simple Setup
Main unit
Audio and video connections
3
Basic setup example
Scart cable (not included)
Enjoying sound from the television through the home theater system
≥ Press [EXT-IN] (➜ page 30) on the remote control to select the
“AV” audio input.
≥
Select the appropriate audio out (e.g., Monitor) on the television.
Cable connections
SA-PTX3
MUSIC PORT
AV
OPENCLOSE
SELECTOR
TUNING
Main unit
To improve picture quality, you can change the video signal output from the SCART (AV) terminal.
≥ Select “RGB/No Output” (RGB only) from QUICK SETUP (➜ page 9).
≥ Set “Video Mode” to “Off” (➜ page 25, “HDMI” menu).
≥ Do not use the HDMI cable when you use the scart cable for the connection.
Other video connections for improved picture quality
AV1
AV2
R
P
OPTICAL
L
OUT
R
P
B
Y
AUX
COMPONENT
VIDEO OUT
OPTICAL
IN
AV OUT
Television
(not included)
AV OUT
Scart cable
(not included)
Set top box or video
cassette recorder
(not included)
Television terminals
Cables required
(not included)
HDMI cable
Main unit terminalsFeatures
[\\\\\\\\\\\HDMI\\\\\\\\\\\]
This connection provides the best picture quality.
≥ Set “Video Mode” to “On” (➜ page 25, “HDMI” menu).
≥ Set “Video Output Mode” (➜ page 21, Picture Menu).
AV IN
COMPONENT
VIDEO IN
Y
PB
PR
All Panasonic televisions
with 625 (576)/50i·50p,
525 (480)/60i·60p input
terminals are progressive
compatible. Consult the
manufacturer if you have
another brand of television.
[Note]
≥ Non-HDMI-compliant cables
cannot be utilized.
≥ It is recommended that you use
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m),
RP-CDHG30 (3.0 m),
RP-CDHG50 (5.0 m), etc.
Video cables
AV OUT
[COMPONENT\VIDEO]
Y
COMPONENT
VIDEO OUT
≥ Connect to terminals
of the same colour.
VIERA Link “HDAVI Control”
If your Panasonic television is a
television, you can operate your television
synchronising with home-theater operations or vice
versa (➜ page 26, Using the VIERA Link “HDAVI
TM
”).
Control
≥ Make the extra audio connection (➜ page 7) when
VIERA Link “
you use
This connection provides a purer picture than the
SCART (AV) terminal.
R
P
≥
When making this connection, select “Video/YPbPr” or
“S-Video/YPbPr” from
P
B
“RGB/No Output” is selected, the RGB signal is output
from the
SCART (AV)
from the component video terminals.
To enjoy progressive video
≥ Connect to a progressive output compatible
television.
1
Set “Video Mode” to “
2
Set “
Video Output Mode
then follow the instructions on the menu screen
(➜ page 21, Picture Menu).
VIERA Link
HDAVI Control” function.
QUICK SETUP (➜
terminal, but no signal is output
Off
” (➜page 25, “HDMI” menu).
” to “480p” or “
compatible
page 9). If
576p
”, and
[Note]
≥Do not make the video connections through the video cassette recorder.
RQTX0022
6
Due to copy guard protection, the picture may not be displayed properly.
≥ Only one video connection is required. Choose one of the video connections above depending on your television.
Other audio connections
Television or
external equipment
terminal
OPTICAL OUT
AUDI O
OUT
L
R
Cable required
(not included)
Optical digital audio cable
≥ Do not bend sharply when
connecting.
Audio cable
Main unit terminalFeatures
[OPTICAL\IN]
OPTICAL
IN
[\\\\\\\\\\\AUX\\\\\\\\\\\]
L
R
AUX
This unit can decode the surround signals received
through the set top box, digital broadcasting or satellite
broadcasts. Refer to your equipment’s operating
instructions for details. Only Dolby Digital and PCM can
be played with this connection.
After making this connection, make settings and select
≥
sound effects to suit your digital equipment
➜
page 31).
(
This connection enables you to play audio from your
television, set top box or video cassette recorder
through your home theater system.
≥ Press [EXT-IN] on the remote control to select “
audio input (➜ page 30).
AUX
5.1 channel amplifier connection
To enjoy 5.1 channel surround sound DVD-Video, connect an amplifier with a built-in Dolby Digital or DTS decoder using an optical digital audio
cable.
≥ Set “PCM Digital Output”, “Dolby Digital”, “DTS Digital Surround” and “MPEG” (➜ page 24).
Optical digital audio cable
(not included)
≥ Do not bend sharply when
connecting.
OPTICAL
IN
Amplifier (not included)
[Note]
≥
Using the connections shown above, you can output CD or DVD audio only.
≥ Before purchasing an optical digital audio cable, check the terminal shape of the equipment to be connected.
≥ You cannot use DTS Digital Surround decoders not suited to DVD.
≥ Even if using this connection method, output will be in only 2 channels when playing DVD-Audio.
.
Insert fully with this
side facing up.
OPTICAL
OUT
Main unit
OPTICAL
OUT
Simple Setup
”
Cable connections / AC mains lead connection
step
3
AC mains lead connection
To household mains socket
AC IN
AC mains lead (included)
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.3 W). To save power when the unit is not to be
used for a long time, unplug it from the household AC mains socket.
You will need to reset some memory items after plugging in the main unit.
Main unit
[Note]
The included AC mains lead is for use with the main unit only. Do not use
it with other equipment. Also, do not use cords for other equipment with
the main unit.
RQTX0022
7
step
D
4
Preparing the remote control
Simple Setup
∫ Batteries
Insert so the poles (i and j) match those in the remote control.
Press in and lift up.
R6/LR6, AA
Replace the cover.
≥ Do not use rechargeable type batteries.
step
5
Presetting the radio stations
FM
Numbered
buttons
,
,
ENTER
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor (➜ page 11), avoiding
obstacles, at a maximum range of 7 m directly in front of the unit.
Up to 30 stations can be set.
Press [FM]§1 to select “FM”.
1
Press [6, 5]§2 to select the frequency.
2
≥ When performing this step on the main unit, first press
[-TUNE MODE] to select “MANUAL”, and then press
[
X
TUNINGW] to select the frequency.
To start automatic tuning, press and hold [6, 5] until the
frequency starts scrolling. Tuning stops when a station is found.
While listening to the broadcast
3
Press [ENTER]§3.
While the frequency and “PGM” are flashing on the display
4
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X, W], and then
press [ENTER]
§3
.
DISC SFC
D.MIX
MONO
TG
SLP
MANUAL SKIP
Preparing the remote control / Presetting the radio stations
SELECTOR
TUNING
Radio operations are described mainly with the remote control.
You can alternatively use the corresponding button on the main unit.
unit, first press [-TUNE MODE] to select “PRESET”, and then
press [X TUNING W] to select the channel.
RG
S
E
AC
DISC SFC
TG
D.MIX
MONO
SLP
8
step
6
Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode
(e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (➜ page 10).
Simple Setup
DVD
SETUP
MANUAL SKIP
, , ,
ENTER
RETURN
1
2
3
DVD
SETUP
Turn on the unit.
Select “DVD/CD”.
Show the QUICK SETUP
screen.
Setup
QUICK SETUP
Select the menu language.
English
Polski
Cesky
to select and press
4
Select
ENTER
Follow the messages
and make the settings.
RETURN
≥Menu Language
≥TV Type
≥TV Aspect
Register
≥Video Out (AV/Component)
(For details ➜ below)
5
ENTER
Press to finish QUICK
SETUP.
ENTER
Deutsch
Magyar
RETURN
to return
Performing QUICK SETUP
∫ Details of settings
Menu Language
Choose the language for the
on-screen messages.
TV Type
Select to suit the type of television.
TV Aspect
Choose the setting to suit your
television and preference.
Video Out (AV/Component)
Choose the video signal format to be
output from the SCART (AV) and
COMPONENT VIDEO OUT
terminals.
≥ Underlined items are the factory settings in the above table.
≥ English≥ Français≥ Español≥ Deutsch≥ Pol ski
≥ Русский≥ Çesky≥ Magyar
≥ Standard (Direct View TV)
≥ Projection TV≥ Plasma TV
: Regular aspect television
≥ 4:3
≥ 16:9: Widescreen television
≥ Video/YPbPr
≥ RGB/No Output
6
To change these settings later
Select “QUICK SETUP” in the “Others” menu (➜ page 25).
≥ CRT Projector≥ LCD TV/Projector
≥S-Video/YPbPr
SETUP
Press to exit.
RQTX0022
9
Control reference guide
See page references in parentheses.
Turn the main unit on/off (9)
Select disc’s title numbers etc./Enter numbers (15)
Cancel (15)
Select preset radio stations/channels (8, 28)
Basic operations for play (14, 15)
Display current playback condition (16)
Start up and play a disc automatically (15, 26)
Show a disc top menu (18) or program list (19)
Show a disc menu (18) or playlist (19)
CANCEL
Television operations
Aim the remote control at the Panasonic
television and press the button.
[Í TV]: Turn the television on/off
[TV/AV]: Change the television’s video input mode
[r, s]: Adjust the television volume
EXT-IN
FM
≥ This may not work properly with some models.
Select the source
[DVD]:
DVD/CD
FM (8,
28)
USB
D-IN
SELECT]:
(9)
(31)
, AV
(30)
, AUX
(30)
(31),
OPTION
(30)
, MUSIC P.
,
DVD/CD, USB, FM, AV, AUX ,
MUSIC P., D-IN
,
OPTION
(30)
[FM]:
[EXT-IN]:
[
N,O
Adjust the volume of the main unit
Select radio stations/channels manually (8, 28)
Select Dolby Virtual Speaker mode (29)
Frame-by-frame/ Select or register menu items on the
television screen (15)
Show on-screen menu (20) or display RDS text data (28)
SUBWOOFER
LEVEL
Control reference guide
Turn the unit off automatically (Sleep timer)
≥ The maximum setting is 120-min (in 30-min steps).
(29)(29)(29)(15)
AUDI O
(16)(16)
ZOOM
(17)
SETUP
(23)
EQH.BASS
REPEAT
MANUAL SKIP
(16)
PLAY MODE
(17)
ANGLE/PAGE
(17)
FL DISPLAY
(15)
GROUP
QUICK REPLAY
(16)
SUBTITLE
(16)
≥ Press the button again to confirm the remaining time on the unit’s display.
≥ To cancel, select “OFF” in the main unit’s display.
Avoiding interference with other Panasonic equipment
Other Panasonic audio/video equipment may star t functioning when you
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control
operating mode to “REMOTE 2”.
AUDI O
ZOOM
H.BASS
GROUP
SUBTITLE
ANGLE/
MANUAL SKIP
PAG E
Mute the sound
≥ “MUTING” flashes in the main unit’s display while
the function is on.
≥ To cancel, press the button again or adjust the
volume.
≥ Muting is cancelled when you switch the unit to
standby.
The main unit and remote control must be set to the same mode.
1 Press and hold [9] on the main unit and [2] on the remote control
until the main unit's display shows “REMOTE 2”.
2 Press and hold [ENTER] and [2] on the remote control for at least 2
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by
replacing [2] with [1].
Return to previous screen (15)
10
RQTX0022
OPEN CLOSE
SELECTOR
SA-PTX3
MUSIC PORT
DVD HOME THEATER SOUND SYSTEM
TUNING
Standby/on switch [Í/I]
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power. (14)
AC IN
AC supply indicator [AC IN]
This indicator lights when the unit is
connected to the AC mains supply.
:, 9/ X TUNING W
Skip (14)/
Select the radio stations/channels (8, 28)
When opening and closing the front cover, be
careful not to touch the standby/on switch [Í/I].
∫ /-TUNE MODE / —FM MODE
Stop playing (14)/
Select the tuning mode (8, 28)
Adjust the FM reception condition (28)
1/MEMORY
Play discs (14)/
Memorize the receiving
radio stations/channels (8, 28)
Dolby Virtual Speaker
LED
VIRTUAL SPEAKER
MUSIC PORT
Headphones
(not included)
Headphone plug type:
‰3.5 mm stereo mini plug
≥ Reduce the volume before
connecting.
≥ Audio is automatically
switched to 2-channel stereo.
≥ To prevent hearing damage,
avoid listening for prolonged
periods of time.
MUSIC PORT
Connect an external
device (30)
∫ If the front cover comes off
< OPEN/CLOSE
Open/Close the disc tray (14)
OPEN CLOSE
USB terminal
Connect a USB device (31)
SELECTOR
DVD/CD#USB#FM#AV#
MUSIC P.
#D-IN#
AUX#
OPTION
Return to DVD/CD
Î VIRTUAL SPEAKER
Enjoy surround sound
effect (29)
SELECTOR
TUNING
TUNE MODE FM MODE
MEMORY
Display
#
Remote control
signal sensor
Adjust the volume
of the main unit.
Jog LED
1 Hold rear side of main unit by one hand and match up left or right side
protruding hook on the cover first with the corresponding slot on the
unit.
2 Push the hook firmly towards the unit until it clicks into place. Then
push the succeeding hooks one by one until all have clicked into
place.
3 Check that the cover now moves correctly.
– If it does not, remove it and repeat the above procedure.
Control reference guide
90°
RQTX0022
11
Discs that can be played
Commercial discs
DiscLogo
DVD-Video[DVD-V]High quality movie and music discs
Indicated in these
instructions by
Remarks
DVD-Audio[DVD-A]
Video CD[VCD]
CD[CD]Music discs
Recorded discs (±: Playable, —: Not playable)
DiscLogo
DVD-RAM
Discs that can be played
DVD-R/RW
DVD-R DL
High fidelity music discs
Music discs with video
Including SVCD (Conforming to IEC62107)
§1
Recorded on a
DVD video
Recorded on a personal computer, etc.
recorder, etc.
§5
[DVD-VR]§3[DVD-V]
[WMA][MP3][JPEG] [MPEG4] [DivX]
±——±±±±
±±—±±±±
§4
±
±—————
Finalizing
Not necessary
Necessary
Necessary
§7
iR/iRW
iR
DL
CD-R/RW
≥ It may not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of the recording, the recording
method, or how the files were created (➜ page 13, Tips for making data discs).
§1
Some DVD-Audio discs contain DVD-Video content. To play DVD-Video content, select “Play as Data Disc” (➜ page 22, Other Menu).
§2
This unit can play CD-R/RW recorded with CD-DA or Video CD format.
[WMA][MP3][JPEG] This unit also plays HighMAT discs.
§3
Discs recorded on DVD recorders or DVD video cameras, etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).
§4
Discs recorded on DVD recorders or DVD video cameras using Version 1.2 of the Video Recording Format (a unified video recording standard).
§5
Discs recorded on DVD recorders or DVD video cameras using DVD-Video Format.
§6
Recorded using a format different from DVD-Video Format, therefore some functions cannot be used.
§7
A process that allows play on compatible equipment. To play a disc that is indicated as “Necessary”, the disc must first be finalized on the device it
was recorded on.
§8
Closing the session will also work.
§2
——(±)
——(±)
———±±±±±
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifications of the Compact Disc Digital Audio (CD-DA) format so
playback may not be possible.
∫ Discs that cannot be played
Blu-ray, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-ROM,
CD-ROM, CDV, CD-G, SACD and Photo CD, DVD-RAM that cannot
be removed from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and
“Chaoji VCD” available on the market including CVD, DVCD and
SVCD that do not conform to IEC62107.
∫ Video systems
– This unit can play PAL and NTSC, but your television must match
the system used on the disc.
– PAL discs cannot be correctly viewed on an NTSC television.
RQTX0022
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL
12
television (➜ page 24, “NTSC Disc Output” in “Video” menu).
§6
—————
§6
—————
∫ Disc handling precautions
≥ Do not attach labels or stickers to discs. This may cause disc
warping, rendering it unusable.
≥ Do not write on the label side with a ball-point pen or other writing
instrument.
≥ Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Necessary
Necessary
Necessary
§8
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.