Panasonic SC-HTB770 User Manual

Owner’s Manual

Home Theater Audio System

Model No. SC-HTB770

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505

(U.S. customers only)

RQT9778-1P

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING

Unit

≥ To reduce the risk of fire, electric shock or product

damage, j Do not expose this unit to rain, moisture, dripping or

splashing.

j Do not place objects filled with liquids, such as vases,

on this unit.

j Use only the recommended accessories. j Do not remove covers. j Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

AC power supply cord

≥ The power plug is the disconnecting device.

Install this unit so that the power plug can be unplugged from the socket outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not disassemble,

heat above 60

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

<For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

C (140oF) or incinerate.

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

RQT9778

Precautions

CAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Unit

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

Placement

≥ To reduce the risk of fire, electric shock or product

damage, j Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is well ventilated.

j Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the manufacturer.

≥ Keep out of reach of children. ≥ Insert with poles aligned. ≥ Mishandling of batteries can cause electrolyte leakage

and may cause a fire. j Remove the battery if you do not intend to use the

remote control for a long period of time. Store in a cool, dark place.

j Do not heat or expose to flame. j Do not leave the battery(ies) in a car exposed to

direct sunlight for a long period of time with doors and windows closed.

j Do not touch the terminals (i and j) with metal

objects.

j Do not recharge, disassemble, remodel, heat or

throw into fire.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and

receiver.

≥ Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV

technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Marketing Company of North America Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.

This device complies with RSS-GEN, RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

‘

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 person’s body (excluding extremities: hands, wrists, feet and ankles).

/8q) or more away from

RQT9778

Unit care

∫ Clean this system with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water

tightly to wipe the dirt, and then wipe it with a dry cloth.

≥ When cleaning the speakers, use a fine cloth. Do not

use tissues or other materials (towels, etc.) that can fall apart. Small grains may get stuck inside the speaker cover.

≥ Never use alcohol, paint thinner or benzine to clean this

system.

≥ Before using chemically-treated cloth, carefully read the

instructions that came with the cloth.

∫ To dispose or transfer this system

This system may keep the user settings information in the main unit. If you discard the main unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (> 36, “To return to the factory preset.”)

≥ The operation history may be recorded in the memory

of the main unit.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

HDAVI Control™ is a trademark of Panasonic Corporation.

VIERA Link™ is a trademark of Panasonic Corporation.

EZ Sync™ is a trademark of Panasonic Corporation.

The Bluetooth Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

word mark and logos are owned by the

About Bluetooth

Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission.

∫ Frequency band used

This system uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and has

received certification based on frequency laws. Thus, a wireless permit is not necessary.

≥ The action below are punishable by law in some

countries:

j Taking apart or modifying the unit. j Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all Bluetooth®

equipped devices is not guaranteed.

≥ All devices must conform to standards set by Bluetooth

SIG, Inc.

≥ Depending on the specifications and settings of a

device, it can fail to connect or some operations can be different.

≥ This system supports Bluetooth

depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

device.

security features. But

∫ Range of use

Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference.

∫ Interference from other devices

≥ This system may not function properly and troubles

such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth GHz band.

≥ This system may not function properly if radio waves

from a nearby broadcasting station, etc. are too strong.

devices or the devices that use the 2.4

∫ Intended usage

≥ This system is for normal, general use only. ≥ Do not use this system near equipment or in an

environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc).

RQT9778

Precautions

Reference Getting started

Before useOperations

Table of contents

IMPORTANT SAFETY INSTRUCTIONS .......................................................................... 2

Unit care ........................................................................................................................... 4

About Bluetooth®............................................................................................................. 4

Before use

Supplied items ................................................................................................................. 6

This system (SC-HTB770) ......................................................................................................... 6

Accessories................................................................................................................................ 6

Control reference guide .................................................................................................. 7

This system (Front) .................................................................................................................... 7

This system (Rear)..................................................................................................................... 8

Remote control........................................................................................................................... 9

Getting started

Step 1 Selecting the placement method..................................................................... 10

The speaker system ................................................................................................................. 11

The active subwoofer ............................................................................................................... 11

Wireless interference ............................................................................................................... 11

Step 2 Assembling the speakers................................................................................. 12

When attaching the speakers to a wall .................................................................................... 12

When placing the speakers on a table ..................................................................................... 19

Additional speaker fall prevention measures ........................................................................... 24

Step 3 Connections ...................................................................................................... 26

Connection with the TV ............................................................................................................ 26

Connection with other devices ................................................................................................. 27

Speaker cable connection........................................................................................................ 28

AC power supply cord connection............................................................................................ 28

Active subwoofer wireless connection ..................................................................................... 29

Bluetooth

connection.............................................................................................................. 29

Operations

Using this system .......................................................................................................... 30

3D sound ........................................................................................................................ 31

Sound modes ........................................................................................................................... 31

Linked operations with the TV

(VIERA Link

“HDAVI ControlTM”).......................................................................... 32

Advanced operations .................................................................................................... 33

Reference

Troubleshooting............................................................................................................. 36

Specifications ................................................................................................................ 38

Indicator illumination..................................................................................................... 40

Limited Warranty

(ONLY FOR U.S.A. AND PUERTO RICO) ................................................................. 42

Limited Warranty (ONLY FOR CANADA) ..................................................................... 43

RQT9778

Beforeuse

≥ The illustrations shown may differ from your unit. ≥ Operations in this Owner’s Manual are described mainly with the remote control, but you can

perform the operations on the main unit if the controls are the same.

Supplied items

This system (SC-HTB770)

∏ 1 Main unit

(SU-HTB770)

∏ 1 Active

subwoofer

∏ 1 Center speaker

(SB-HTB770)

(SB-HWA770)

Accessories

Check the supplied accessories before using this system.

∏ 1 Remote control

(with a battery)

(N2QAYC000083)

∏ 6 Screws

(XYN5+J14FJK)

∏ 2 AC power supply

cords

(K2CB2CB00022)

∏ 2 Hook brackets

(RML0763)

∏ 3 Speaker cables

(REE1789: RED) (REE1790: WHITE)

Length: 3 m (9.8 ft)

(REE1791: GREEN)

Length: 2 m (6

∏ 2 Stand necks

(RGK2444)

/2 ft)

∏ 2 Front speakers

(SB-HTB570)

∏ 1 Metal bracket

(RML0760A)

∏ 2 Side caps

(RGK2445: R) (RGK2446: L)

∏ 2 Leg stands

(RGK2463)

∏ 2 Support legs

(RGK2464)

∏ 2 Speaker bases

(RGK2465)

∏ 2 Speaker feet

(RKAX0042-K)

(ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English display on the remote control and the top and rear of the main unit and active subwoofer.



≥ Product numbers are correct as of December 2012. These may be subject to change. ≥ For U.S.A. and Puerto Rico:

To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 42. For Canada: To order accessories, call the dealer from whom you have made your purchase.

≥ The supplied AC power supply cord is for use with this system only.

Do not use it with other equipment. Also, do not use cords from other equipment with this system.

RQT9778

Before use

Control reference guide

456

Main unit

Active subwoofer

This system (Front)

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Adjust the volume of this system 3 Select the input source

“TV”---------#“BD/DVD”---------#“AUX1”

^-- “”(- “AUX3”(- “AUX2”(}

4 Input selector indicators

A Bluetooth® indicator

Lights blue when the Bluetooth

§1

device is

the audio source

B TV indicator

Lights green when the TV is the audio source

C BD/DVD indicator

Lights amber when the device connected to the BD/DVD terminal is the audio source

D AUX1 indicator

5 Sound mode indicators

G STANDARD indicator

Lights when STANDARD is the current sound mode

H STADIUM indicator

Lights when STADIUM is the current sound mode

I MUSIC indicator

Lights when MUSIC is the current sound mode

J CINEMA indicator

Lights when CINEMA is the current sound mode

K NEWS indicator

Lights when NEWS is the current sound mode

L STEREO indicator

Lights when STEREO is the current sound mode

6 Remote control signal sensor (> 9) 7 WIRELESS LINK indicator (> 29)

§1

§2

Lights amber when the device connected to the AUX1 terminal is the audio source

E AUX2 indicator

Lights amber when the device connected to the AUX2 terminal is the audio source

F AUX3 indicator

Lights amber when the device connected to the AUX3 terminal is the audio source

§1 The indicators will also blink in various conditions. (> 40)

§2 The indicator blinks for 5 sec when the main unit detects an audio format.

To manually verify the current audio format and the corresponding indicators, refer to page 33 (Audio format indicator).

RQT9778

This system (Rear)

AV IN

(ARC)

BD/DVD

AUX1

(HDMI1)

(HDMI2)

AUX2

(HDMI3)

AV OUT

AV IN

(ARC)

BD/DVD

AUX1

(HDMI1)

(HDMI2)

AUX2

(HDMI3)

AV OUT

1 AC IN terminal (> 28) 2 Speaker terminals (> 28) 3 TV terminal (> 26) 4 AUX3 terminal (> 27) 5 USB port (for service use only)

6 AUX2 terminal (> 27) 7 AUX1 terminal (> 27) 8 BD/DVD terminal (> 27) 9 HDMI OUT terminal (ARC compatible) (> 26) 10 Active subwoofer on/off button (> 29)

§ The I/D SET button is only used when the main unit is not paired with the active subwoofer. (> 37)

RQT9778

Before use

Remote control







B Remote control signal sensor

≥ Operation range

Distance: Within approx. 7 m (23 ft) directly in front Angle: Approx. 30

left and right

∫ Before using for the first time

Remove the insulation sheet A.

DIALOG LEVEL

INPUT

LINK MODE

SELECTOR

----

PAIRING

SOUND

1 Turn the main unit on or off (> 30) 2 Adjust the dialog effect level (> 30) 3 Adjust the output level of the active subwoofer

(bass sound) (> 30) 4 Adjust the volume of this system(> 30) 5 Mute the sound (> 30) 6 Select the input source (> 30)

“TV”---------#“BD/DVD”---------#“AUX1”

^--- “”( “AUX3”( “AUX2”(}

7 Select the Bluetooth

(> 30) 8 Select the sound mode (> 31)

“STANDARD” -----#“STADIUM” -----#“MUSIC”

^- “STEREO”( “NEWS”( “CINEMA”(}

device as the source

∫ To replace a button-type battery

Battery type: CR2025 (Lithium battery)

≥ Set the button-type battery with its (i) mark

facing upward.

≥ Keep the button-type battery out of reach of

children to prevent swallowing.

∫ Remote control operation range

The remote control signal sensor is located on the main unit.

≥ Use the remote control within the correct operation range.

RQT9778

Gettingstarted

When attaching the speakers to a wall

When placing the speakers on a table

Place the speakers horizontally

Page 12

Place the front speakers vertically

Place the speakers using the leg stands

Place the front speakers using the speaker bases

Page 15

Page 19

Page 20

Page 21

Place the speakers using the support legs and speaker feet

Step 1 Selecting the placement method

≥Choose a placement method that suits you best.

RQT9778

Getting started

Caution

≥ This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the

amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Do not attempt to attach the speakers to a wall using methods other than those described in this manual.

The speaker system

≥Use a screwdriver (i) for assembling the speakers. ≥Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them.

∫ When attaching the speakers to a wall

The wall or pillar on which the speakers are to be attached should be capable of supporting 33 kg (72.8 lbs) per screw. Consultation with a qualified installation specialist is recommended when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers, and personal injury.

∫ When placing the speakers in front of the TV

The speakers may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.

≥ If the leg stands are being used

Change the height of the leg stands and/or move the speakers further away from the TV. If the TV still does not function correctly, try removing the leg stands.

≥ If the leg stands are not used

Move the speakers further away from the TV. If the TV still does not function properly, try placing them beside the TV (> 10).

The active subwoofer

When carrying the active subwoofer

A Do not hold the active subwoofer from this

opening.

The parts inside may get damaged.

B Always hold the bottom of the active subwoofer when

moving it.

Wireless interference

To avoid interference, maintain the following distances between the main unit/active subwoofer and other electronic devices that use the same radio frequency (2.4 GHz band).

C Main unit/active subwoofer D Wireless router, cordless phone and other

electronic devices: approx. 2 m (6

/2 ft)



≥ Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward. ≥ Do not use the main unit or the active subwoofer in a metal cabinet. ≥ Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with

thick curtains.

≥ If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away from

the TV.

≥ Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the active subwoofer

and the speakers.

RQT9778

Step 2 Assembling the speakers



When attaching the speakers to a wall

Place the speakers horizontally

The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs). The screws and other items are not supplied as the type and size will vary with each installation.

≥

For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” (

13).

∏ 2 Front

speakers

∏ 1 Metal bracket ∏ 4 Screws

≥For a safety measure to prevent the speakers from falling, refer to page 24. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.

Assemble the speakers.

≥ There is no left and right for the center speaker. ≥ The two front speakers are interchangeable. ≥ Keep the screws out of reach of children to prevent swallowing.

∏ 1 Center speaker ∏ 3 Speaker cables

WHITE: Left RED: Right GREEN: Center

A Screw (supplied)

≥ Tighten securely.

RQT9778

Getting started

Connect the speaker cables.











Push

Red

White

Green













Front view (semi-transparent image)

1 Insert the wire fully.

r: White s: Blue line

≥ Insert the wire fully, taking care not to insert

beyond the wire insulation.

2 Press into the groove.

§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the

cable about 20 mm (

/32q) from the tip, at an angle of approx. 45o (as illustrated above).

A Right speaker connector B Center speaker connector C Left speaker connector

Drive a screw into the wall.

≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm ( ≥ Keep the screws out of reach of children to prevent swallowing.

 





F 238 mm (9 J Wall mounting hole

/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker.

A At least 30 mm (1 B ‰4.0 mm ( C ‰7.0 mm to ‰9.4 mm ( D Wall or pillar E 5.5 mm to 6.5 mm (

/32q)

/16q)

/32q to 1/4q)

/32q to 3/8q)







/8q) G 745 mm (2911/32q) H 248 mm (93/4q) I 20 mm (25/32q)





RQT9778

Wall mount the speakers:





Red

White

Fit the speaker securely onto the screw(s).

Red connector: The speaker attached to the red connector cable is to be placed on the right side.

White connector: The speaker attached to the white connector cable is to be placed on the left side.

A Right speaker connector B Left speaker connector

DO DO NOT

RQT9778

≥ Move the speaker so

that the screw is in this position.

≥ In this position, the

speaker will likely fall if moved to the left or right.

+ 30 hidden pages