Quick Start Guide
Home Theater Audio System SC-HTB770
Step 1: Choose the configuration that is right for you
Place the speakers horizontally
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. ≥ Tighten screws securely.
Push |
Press into the |
|
groove. |
|
|
|
|
|
Fully insert the wire. |
|
|
r: White |
|
Green |
s: Blue line |
White
Red
Place the front speakers vertically
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
|
|
≥ Tighten screws securely. |
|
|
|
|
|
||
|
|
Green |
|
|
|
|
|
||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
Speaker placement |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speaker with, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red connector: |
|
|
|
|
|
Push |
||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
To the right
White connector:
To the left
Green connector:
In the centre
1 Fully insert the wire.
r: White s: Blue line
2 Press the cable into the groove.
Push
Red or White
RQCA2151
F0213TA0
Step 2: Connect the cables
Do not connect the AC mains lead to the main unit and the active subwoofer until all other connections are completed.
When the TV is HDMI (ARC) compatible
TV |
HDMI IN |
(ARC) |
Be sure to connect to the TV’s ARC compatible terminal. (Refer to the TV’s operating instructions.)
HDMI cable
TV (ARC)
AV OUT
6 |
6 |
6 |
R |
|
L |
AC IN |
|
DIGITAL |
|
AUDIO |
|
|
|
IN |
|
|
TV |
|
|
(ARC) |
|
SPEAKERS |
|
|
|
AV OUT |
Main unit |
|
White |
|
|
|
|
|
Green |
|
|
Red |
HDMI (ARC)
Audio Return Channel:
Allows a home theater system to receive and play audio from the TV through a HDMI cable without additional wiring.
When the TV is non HDMI (ARC) compatible
|
HDMI IN |
TV |
HDMI cable |
|
|
|
OPTICAL |
|
OUT |
DIGITAL |
|
|
|
|
AUDIO |
|
|
|
|
IN |
|
|
|
|
|
|
|
|
TV |
|
|
|
|
(ARC) |
TV |
|
|
|
|
(OPT1) |
|
|
|
AV OUT |
Optical digital |
|
|
|
|
|
|
|
|
|
audio cable |
6R |
6 |
6L |
|
AC IN |
|
|
|
DIGITAL |
|
|
|
AUDIO |
|
|
|
|
|
IN |
|
|
|
|
TV |
|
|
|
|
(ARC) |
|
|
SPEAKERS |
|
|
|
|
|
TV |
|
|
|
|
(OPT1) |
AV OUT |
Main unit |
|
|
|
White |
|
|
|
|
|
|
|
|
|
Green |
|
|
|
|
Red |
Using this system
When the TV is VIERA Link “HDAVI ControlTM” or HDMI CEC compatible
e.g. TV remote control
Turn on the active subwoofer.
On the TV, select this home theater system as the TV’s speakers from the VIERA Link menu.
≥ If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
Press [i VOL j] on the TV’s remote control to adjust the volume.
≥ Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
When the TV is not VIERA Link “HDAVI ControlTM” or HDMI CEC compatible
e.g. TV remote control
INPUT |
SELECTOR |
Turn on the main unit, active subwoofer and the TV.
Press [INPUT SELECTOR] to select the TV sound.
Press [i VOL j] to adjust the volume.
≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to minimum.
HDMI cable is required for VIERA Link “HDAVI Control”.
For wall mounting and other details, be sure to refer to the Operating Instructions.