Panasonic KX-TGA550M, KX-TGA552M User Manual

Installation Manual

5.8 GHz Expandable Digital Cordless Handset

Model No.

KX-TGA550 KX-TGA552

Thank you for purchasing a Panasonic cordless telephone.

This handset is an accessory handset for use with Panasonic base units KX-TG5561, KX-TG5566, KX-TG5571, KX-TG5576, and KX-TG5583. You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details.

Charge the battery for 6 hours before initial use.

Please read this Installation Manual before using the unit and save for future reference.

PQQX14420YA DM0205MK2045

Accessory information

To order replacement accessories, call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277.

Included accessories Order number

Charger PQLV30030ZM 1 1

AC adaptor for charger KX-TCA1-G 1 1

Battery HHR-P104 1 1

Handset cover PQYNTG5432MR 1 1

Belt clip PQKE10396Z2 1 1

USB cable PQJA10166Z – 1

CD-ROM PQJKTG5576Z – 1

Quantity

KX-TGA550 KX-TGA552

Connections

To power outlet (120 V AC, 60 Hz)

AC adaptor

Note:

L Use only the included Panasonic AC adaptor KX-TCA1. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel

warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.

Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

2 For assistance, please visit http://www.panasonic.com/consumersupport

Battery installation

Battery charge

1 Insert the battery (1), and press it

down until it snaps into the compartment (2).

2 Close the handset cover.

Attention:

Place the handset on the charger for 6 hours before initial use.

L The unit will beep once, the CHARGE

indicator will light, and “Charging” will be displayed.

L “Charge completed” is displayed

when the battery has been fully charged. The CHARGE indicator will remain lit.

CHARGE indicator

Note:

L To ensure the battery charges properly,

clean the charge contacts of the handset and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity.

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

For assistance, please visit http://www.panasonic.com/consumersupport 3

Recharging the battery

Recharge the battery when: –“Recharge battery” is displayed or

3 flashes on the handset display.

– the handset beeps intermittently while it

is in use.

Note:

L If the battery has been discharged, the

handset will display “Charge for 6 HRS” and 4 when you place the handset on the charger.

Battery performance

After your Panasonic battery is fully charged, you can expect the following performance:

Operation Operating time

While in use (talking)

While not in use (standby)

While using the clarity booster feature

*1 Handset is off the charger but not in

use.

Up to 5 hours

Up to 11 days

Up to 3 hours

Note:

L To cancel the handset registration,

please see your base unit’s operating instructions.

Changing the display language

1 Press {MENU} (center of joystick), then

press {#} {1} {1} {0}.

2 Press {1} to select English.

Press {2} to select Spanish.

3 Press {SAVE} or {GUARDAR}, then

press {OFF}.

Belt clip

Registration

Important:

L Charge the battery fully. L Before registering, make sure the base

unit and the other handsets are not being used.

L Have the handset and base unit near

each other when registering the handset.

1 Base unit:

Press and hold {INTERCOM} until the CHARGE indicator flashes.

L After the CHARGE indicator starts

flashing, the rest of the procedure must be completed within 1 minute.

2 Handset:

Press {OK} (right soft key), then wait until the handset beeps.

L Registration is complete. L The handset’s extension number (!

to )) will be displayed.

You can hang the handset on your belt or pocket using the included belt clip.

To attach the belt clip

To remove the belt clip

While pressing the top of the clip (1), pull the right edge in the direction of the arrow (2).

4 For assistance, please visit http://www.panasonic.com/consumersupport

+ 7 hidden pages