Panasonic cq-vx100 Operation Manual

TILT

CQ-VD5005W

DIMMER

DIM

TUNE/TRACK

MUTE

SETUP

SOURCE

POWER

VOL

PUSH

SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXT

CQ-VX100U

¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and

keep this manual for future reference.

¡Prière de lire attentivement ces instructions (y compris la “Garantie limitée” et le “Répertoire des services à la clientèle”) avant d’utiliser ce

produit et conserver ce manuel d’utilisation pour s’y référer ultérieurement.

¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura.

In-dash 7”Widescreen Color LCD Monitor/DVD Receiver

Moniteur vidéo couleur grand-écran à écran à cristaux liquides de 7

pouces/récepteur DVD intégrés en tableau de bord

Monitor LCD en color de pantalla panorámica de 7

”/receptor y DVD

empotrado en el tablero de instrumentos

Model: CQ-VX100U

Operating Instructions

Manuel d’instructions

Manual de Instrucciones

TEXT

1

2

CQ-VX100U

English

Safety Information

Warning

Observe the following warnings when using
this unit.

❑

The driver should neither watch the display nor
operate the system while driving.

Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and
use the parking brake before watching the display or oper­ating the system.

❑

Use the proper power supply.

This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this
product with other battery systems, especially a 24 V DC
battery system.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair
the product yourself. If the product needs to be repaired,
consult your dealer or an authorized Panasonic
Servicenter.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.

❑

Refer fuse replacement to qualified service per­sonnel.

When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may
lead to smoke, fire, and damage to the product.

Observe the following warnings when
installing.

❑

Disconnect the lead from the negative (–) battery
terminal before installation.

Wiring and installation with the negative (–) battery termi­nal connected may cause electrical shock and injury due to
a short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO
THE UNINTENDED ACTIVATION OF THE ELECTRICAL
SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI­CLE AND PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installa­tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a
location where it interferes with airbag operation
is prohibited.

❑

Check for piping, gasoline tank, electric wiring,
and other items before installing the product.

If you need to open a hole in the vehicle chassis to attach
or wire the product, first check where the wire harness,
gasoline tank, and electric wiring are located. Then open
the hole from outside if possible.

❑

Never install the product in a location where it inter­feres with your field of vision.

❑

Never have the power cord branched to supply
other equipment with power.

❑

After installation and wiring, you should check the
normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag equipped
car, confirm warnings and cautions of the vehicle
manufacturer before installation.

❑

Make sure the leads do not interfere with driving
or getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuit­ing.

This pictograph intends to alert you to the pres­ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or
death.

■

Read the operating instructions for the unit and all other
components of your car audio system carefully before using
the system. They contain instructions about how to use the
system in a safe and effective manner. Panasonic assumes
no responsibility for any problems resulting from failure to
observe the instructions given in this manual.

■

This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres­ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material dam­age.

Caution

2

3

CQ-VX100U

English

Caution

Observe the following cautions when using
this unit.

❑

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and
traffic conditions while driving.

❑

Do not insert or allow your hand or fingers to be
caught in the unit.

To prevent injury, do not get your hand or fingers caught in
moving parts or in the disc slot. Especially watch out for
infants.

❑

This unit is designed for use exclusively in auto­mobiles.

❑

Do not operate the unit for a prolonged period with
the engine turned off.

Operating the audio system for a long period of time with
the engine turned off will drain the battery.

❑

Do not expose the unit to direct sunlight or exces­sive heat.

Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.

❑

Do not use the product where it will be exposed to
water, moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead
to smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on
rainy days.

❑

Set the volume level to low enough before the AUX
connection is completed.

Failure to observe this, the loud noise may come out and
damage your speakers and your hearing. Direct connection
of the speaker/headphone output of an external device
without any attenuator may distort sound or damage the
connected external device.

Observe the following cautions when
installing.

❑

Refer wiring and installation to qualified service
personnel.

Installation of this unit requires special skills and experi­ence. For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from
your own installation of the unit.

❑

Follow the instructions to install and wire the prod­uct.

Not following the instructions to properly install and wire
the product could cause an accident or fire.

❑

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent
them from getting caught in the vehicle chassis, screws,
and moving parts such as seat rails. Do not scratch, pull,
bend or twist the leads. Do not run them near heat sources
or place heavy objects on them. If leads must be run over
sharp metal edges, protect the leads by winding them with
vinyl tape or similar protection.

❑

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those
supplied or designated may result in internal damage to the
unit. Faulty installation may lead to an accident, a malfunc­tion or fire.

❑

Do not block the air vent or the cooling plate of the
unit.

Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.

❑

Do not install the product where it is exposed to
strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.

❑

Installation Angle

The product should be installed in a horizontal position
with the front end up at a convenient angle, but not more
than 30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit must be
installed. Consult your dealer for further details.

❑

Wear gloves for safety. Make sure that wiring is
completed before installation.

❑

To prevent damage to the unit, do not connect the
power connector until the whole wiring is complet­ed.

❑

Do not connect more than one speaker to one set
of speaker leads. (except for connecting to a
tweeter)

CAUTION:

• PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING,

INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.

3

4

CQ-VX100U

English

Safety Information (continued)

Caution

THIS PRODUCT IS A CLASS ILASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR­SELF. REFER SERVICING TO QUALIFIED PERSONNEL.

This system is designed so that you
cannot see moving pictures while
you are driving.

¡

Park your car in a safe place and pull the side
brake (parking brake) lever before watching the
monitor.

¡

A rear monitor (option) displays moving pic­tures while driving.

Note:

¡Be sure to connect the side brake (parking

brake) connection lead. (

a Installation

Instructions)

The following applies only in the U.S.A.

Part 15 of the FCC Rules

FCC Warning:

Any unauthorized changes or modifications to this
equipment would void the user's authority to operate
this device.

NOTICE:
This product has a fluorescent lamp that
contains mercury.
Dispose may be regulated in your commu­nity due to environmental considerations.
For disposal or recycling information,
please contact your local authorities, or the
Electronic Industries Alliance :
http://www.eiae.org

4

5

CQ-VX100U

English

Notes on Use

Components

7. Installation Hardware (screws,

cords, etc.)
(

a Installation Instructions)

6. Customer Care Plan

Qty.: 1

5. Product Registration Card

Qty.: 1

4. Installation Instructions

<YFM294C127CA>

Qty.: 1

XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

OO-OOOOO

3. System Upgrade Guidebook
<YFM264C064CA>

Qty.: 1

XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

OO-OOOOO

2. Operating Instructions
<YFM264C063CA>

Qty.: 1

XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

OO-OOOOO

1. Main Unit

(LCD monitor/DVD player)

Qty.: 1

Note:

¡The number in parenthesis underneath each accessory

part name is the part number for maintenance and
service.

¡Accessories and their parts numbers are subject to

modification without prior notice due to improvements.

Liquid Crystal Panel

¡Do not cause impact to the liquid crystal panel.
¡Usage temperature range: 0 °C to 40 °C

{32 °F to 104 °F}
When the temperature is very cold or very hot, the
image may not appear clearly or may move slowly.
Also, movement of the image may seem to be out of
synchronization or the image quality may decline in
such environments. Note that this is not a malfunction
or problem.

¡In order to protect the liquid crystal panel, keep it out

of direct sunlight while the unit is not in use.

¡Sudden changes in the temperature inside the car such

as those which occur immediately after the car’s air
conditioner or heater has been turned on may cause
the inside of the liquid crystal panel to cloud over due
to water vapor or it may cause condensation (droplets
of water) to form and, as a result, the panel may not
work properly. Do not use the unit while these symp­toms are in evidence but leave the unit standing for
about and hour, and then resume or start use.

TILT

CLOSEDIMMER

DIMMER

DIM

VOL

PUSH

SEL

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

POWER

SETUP

MUTE

SOURCE

CQ-VX100U

CQ-VD5005W

TEXT

TILT

OPEN

AV1 IN

TUNE/TRACK

5

6

CQ-VX100U

English

Customer Services Directory

U.S.A.

Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:

http://www.panasonic.com/support

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

For hearing or speech impaired TTY users,
TTY : 1-877-833-8855

Accessory Purchases:

Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:

http://www.pasc.panasonic.com

or, send your request by E-mail to:

[e-mail]

You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday­Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)

For hearing or speech impaired TTY users,
TTY : 1-866-605-1277

Service in Puerto Rico

Panasonic Puerto Rico, Inc.
Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone [phone], Fax [phone]

CANADA

WARRANTY SERVICE

FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre:

Telephone #: [phone]
1-800 #: 1-800-561-5505
Fax #: [phone]
Email link: “Contact Us” on www.panasonic.ca

FOR PRODUCT REPAIRS, please locate your nearest Authorized
Servicentre at www.panasonic.ca:

Link : “Servicentres

TM

locator” under “Customer support”

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and prefer­ably in the original carton.
Include details of the defect claimed, and proof of date of original
purchase.

6

7

CQ-VX100U

English

Limited Warranty

U.S.A.

PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094

PANASONIC SALES COMPANY,
DIVISION OF PANASONIC PUERTO RICO, INC.
Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park
Carolina, Puerto Rico 00985

PANASONIC AUTO PRODUCTS
LIMITED WARRANTY

LIMITED WARRANTY COVERAGE

If your product does not work properly because of defects in materials and
workmanship.
Panasonic Consumer Electronics Company or Panasonic Sales Company
(collectively referred to as “the warrantor”) will, for the length of the period
indicated in the chart below, which starts with the date of original purchase
(“warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or refurbished product. The
decision to repair or replace will be made by the warrantor.

During the “Labor” warranty period, there will be no charge for labor. During
the “Parts” warranty period, there will be no charge for parts. You must carry
in or mail in your product prepaid during the warranty period. If non­rechargeable batteries are included, they are not warranted. This warranty
only applies to products purchased and serviced in the United States or
Puerto Rico. This warranty is extended only to the original purchaser of a
new product which was not sold “as is”. A purchase receipt or other proof of
the original purchase date is required for warranty service.

CARRY-IN OR MAIL-IN SERVICE

For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA
(7262) or visit
Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico, call Panasonic Sales Company (787)-750­4300 or fax [phone].

LIMITED WARRANTY LIMITS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials and work­manship, and DOES NOT COVER normal wear and tear or cosmetic damage.
The warranty ALSO DOES NOT COVER damages which occurred during
shipment, failures which are caused by products not supplied by the warran­tor, failures which result from accident, misuse, abuse, neglect, bug infesta­tion, mishandling, misapplication, alteration, faulty installation, set-up
adjustment, maladjustment of consumer control, improper maintenance,
improper antenna, inadequate signal reception or pickup, power line surge,
improper voltage supply, lightning, modification, commercial use (such as
use in hotels, offices, restaurants, or other business uses) or rental use of
the product, or service by anyone other than the technician from Factory
Servicenter or other authorized service centers, or damage that is attributa­ble to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIM­ITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRAN­TY.

(As examples, this excludes damages for lost time, cost of having some­one remove or re-install an installed unit if applicable, travel to and from the
servicer, and loss of media, data or other memory contents. The items listed
are not exclusive, but are for illustration only.)

ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE
LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or conse­quential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or
Servicenter. If the problem is not handled to your satisfaction, then write to
warrantor’s Consumer Affairs Department at the addresses of the warrantor.

PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WAR­RANTY ARE YOUR RESPONSIBILITY.

Customer’s Record
Model

No.
Serial

No.
Dealer’s

No.
Code

No.
Dealer’s

Address
Date of

Purchase

CANADA

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga Ontario L4W 2T3

PANASONIC PRODUCT LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in mate­rials and workmanship and agrees to remedy any such defect for a period as
stated below from the date of original purchase.

CAR AUDIO PRODUCT – ONE (1) YEAR, PARTS AND LABOUR

(The labour to install or remove the product is not warranted)
ACCESSORIES - NINETY (90) DAYS, (IN EXCHANGE FOR DEFECTIVE
ITEMS)

LIMITATIONS AND EXCLUSIONS

This warranty does not apply to products purchased outside Canada or to
any product which has been improperly installed, subjected to usage for
which the product was not designed, misused or abused, damaged during
shipping, or which has been altered or repaired in any way that affects the
reliability or detracts from the performance, nor does it cover any product
which is used commercially. Dry cell batteries are also excluded from cover­age under this warranty.
This warranty is extended to the original end user purchaser only. A pur­chase receipt or other proof of the original purchase date is required before
warranty service is performed.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WAR­RANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPE­CIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.

In certain instances, some jurisdictions do not allow the exclusion or limita­tion of incidental or consequential damages, or the exclusion of implied war­ranties, so the above limitations and exclusions may not be applicable.

Categories Parts Labor

Audio Components (except items listed
below)

One (1) Year One (1) Year

MXE Series Audio Components (except
items listed below)

Two (2) Years Two (2) Years

Speakers
Defective Car Audio Speakers under war­ranty must be exchanged at the place of
purchase. Contact your Dealer for details.

One (1) Year Not Applicable

Accessories (in exchange for defective
items)

Ninety (90) Days Not Applicable

7

8

CQ-VX100U

English

Features

■ Simultaneous Multi-Device Connection

(with Expansion Module (hub unit))

You can connect the optional Expansion Module (hub
unit) (CY-EM100U). Connection of the Expansion
Module allows you to simultaneously connect
optional devices mentioned before as well as other
AV devices. For details, refer to the operating instruc­tions for the Expansion Module.

Connectable devices

¡CD/DVD changer (max. 1)
¡iPod

®

(max. 2)

¡XM Satellite Radio (max. 1)
¡Sirius Satellite Radio (max. 1)
¡Hands Free Kit with Audio Streaming featuring

Bluetooth®technology (Bluetooth unit) (max. 1)

¡TV tuner (max. 1)

Note:

¡Market conditions regarding optional devices vary

with countries and regions. For further information,
consult your dealer.

¡If a non-Panasonic product is connected to this

unit, we do not guarantee the operations of the
product.

■ Integration of the monitor, FM/AM radio,

DVD Video/Video CD player and
CD/MP3/DivX player

■ Built-in AV Input/Output Terminals

For more convenient connection and setup, all termi­nals are now provided on the unit itself.

Note:

¡

If a non-Panasonic product is connected to this
unit, we do not guarantee the operations of the
product.

■ SQ (Sound Quality)

You have 6 preset modes (Flat, Rock, Pop, Vocal,
Jazz, Club). You can customize your setting for these
(except Flat) and save them for instant recall.

SQ3 (3-Band Sound Quality)

Center frequency and level are adjustable in each of 3
bands. This lets you fine-tune sound quality for each
genre to suit car-interior acoustics and your personal
preferences. (

a page 35)

■ GUI (Graphic User Interface)

GUI displays various indications with colorful sym­bols to enhance visibility, enjoyment, and operability.

■ Disc type auto-detection

The signal auto-detection function of this unit allows
users to be free from selection between PAL and
NTSC before use of your discs. (For output signal,

set . (apage 36)

)

■ Touch Panel Operation

Simply touch the screen lightly to operate virtually all
functions. Easy-to-use menus and icons let you
“touch and choose” what you want, so you can start
using your system from the very first day. That also
means that while you drive, you can concentrate on
the road.

■ DVD–R, DVD–RW Playback

(a page 18, 44 for details)

■ ID code

4-digit ID code for increased security.

Fill in the ID code memo (a page 42).

TV Type

Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company.
We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability
we have built into it, you too will be proud to be a member of our family.

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.

■ No device is connected to this unit. a Basic operations are covered only by this book.

■ Optional devices are connected to this unit. a Refer to the “System Upgrade Guidebook” in addition.

9

CQ-VX100U

Contents

¢ Safety Information .......................... 2

¢ Notes on Use ................................................... 5

¢ Components .................................................... 5

¢ Customer Services Directory......................... 6

¢ Limited Warranty............................................. 7

¢ Features ........................................................... 8

¢ Preparation.................................... 10

First time power on, other settings, symbols used in this manual

¢ Name of Controls and Functions ................ 12

¢ Anti-Theft System ......................................... 13

¢ Touch Panel Operation Overview................ 14

¢ General .......................................... 16

Power on/power off, display open/close, source
selection, volume, mute, tilt angle, folding down the
display temporarily

¢

Before Disc Playback

..................... 18

¢

Disc

Player..................................... 20

¢ Notes on MP3/DivX ....................................... 24

¢ Radio.............................................. 26

¢ AV1/AV2 ......................................... 28

¢ Settings ......................................... 30

Setup operation
Basic setting, screen, sound, disc, radio

¢ About DivX VOD Content ............................. 38

¢ Troubleshooting ........................... 39

¢ Maintenance .................................................. 43

¢ Notes on Discs .............................................. 44

¢ Language Code List...................................... 45

¢ Definition of Terms ....................................... 46

¢ Specifications................................................ 47

English 2

Français 48
Español 94

9

10

CQ-VX100U

English

Preparation

(basic settings) (apage 32)

clock, ID code, input, memory clear, other

(screen settings) (apage 34)

dimmer, display, aspect

(sound settings) (apage 35)

SQ3, bass/treble, balance/fader, sub-woofer

(disc settings) (apage 36)

audio language, subtitle language, menu language, video
setting, audio setting, Divx registration

(radio settings) (apage 37)

FM setup

Note:

¡

Refer to “Settings” (apage 30) for further information
about operations, settings, and others of the menu
screen.

Radio

Disc

Sound

Screen

Basic setting

You may need to set the following depending on the
devices to be connected.

Subwoofer

¡

Execute (sub-woofer adjustment).
(

a

page 35)

AV1/AV2 (Camcorder, VCR, etc.)

¡

Adjust . (apage 33)

Input

Sub-Woofer

Other Settings

When the power of this unit is turned on for the first time,
the following screen appears. Perform the settings in
accordance with the specifications of the car on which
this unit is mounted.

: sets to ON if your car has ACC position.

: sets to OFF if your car has no ACC posi-

tion.

default:

Note:

¡ For an ACC-equipped car, select ON. The following

functions are available.

¡ The power is turned on automatically when inserting

a disc or magazine.

¡ selection disables turning on the power of the

main unit through the remote control.

Off

On

Off

On

First Time Power On

Warning

¡When you connect external devices to this unit,

be sure to connect the side brake connection lead
(

aInstallation Instructions).

Please refer to the separate “System Upgrade
Guidebook” for how to operate this unit when option­al devices are connected.

Caution

¡Be sure to select off when your car has no ACC

position in the ignition switch. Failure to do this
could cause the battery to go dead.

OFF

ACC

IGN

10

English

11

CQ-VX100U

Pictographs

You can perform some operations of this unit in one or
more methods with the touch panel or remote control.
This book explains such operations in tabular form as fol­lows. Refer to the following for the pictographs located in
the upper part of each table.

Symbols used in this manual

Disc Marks

The following pictographs are used for the descriptions of
disc operation. (

a page 19-23)

: DVD

: VCD (Video CD)

: CD

: CD-Rs/RWs containing MP3 files

: CD-Rs/RWs or DVD-Rs/RWs containing DivX files

DivX

MP3

VCD

DVD

Compatible types of disc

The discs compatible with the targeted operation.

Compatible

Discs

Compatible

Discs

Operation on the Touch Panel

You can use the touch panel to perform the targeted
operation. If the operation is not executable with the
touch panel, “––” is displayed.

Operation on the Main Unit

You can use the Main Unit to perform the targeted opera­tion. If the operation is not executable with the Main Unit,
“––” is displayed.

DVD

DVD

VCD

VCD

CDCDCD

MP3

MP3

DivX

DivX

12

CQ-VX100U

11

English

Name of Controls and Functions

Disc slot

w [VOL]

(PUSH SEL)

e [MUTE]

t [SOURCE] (POWER)

y [s][d] (TUNE/TRACK)

(Display Closed)

(Display Raised)

r [SETUP]

Remote control sensor

!0 [TILT]

o [OPEN] (CLOSE)

o [OPEN] (CLOSE)

!0 [TILT]

u [u]

q [DIM] (DIMMER)

q [DIM] (DIMMER)

q

w

e

[

MUTE

]

r

[

SETUP

]

t

y

u

[u]

i

o

!0

[

TILT

]

¡Adjusts the monitor position.
¡Tilts the monitor forward temporarily.

¡Opens/closes the monitor.

[

OPEN

]

(CLOSE)

¡From line output of external audio/video

device. (a Installation Instructions)

AV1 IN

¡Ejects/reloads a disc.

Note:

¡Do not insert a disc when the eject button

[u] lights because a disc is already
loaded.

¡Selects or searches for a track, file, sta-

tion.

¡Fast forward/fast reverse.
¡Slow playback ([d]).

[s][d]
(TUNE/TRACK)

¡Switches on/off the power.
¡Changes the modes such as sound and

picture.

[SOURCE]

(POWER)

¡Shows the setup screen.

¡Mutes the sound temporarily.

¡Adjusts the sound volume.
¡Adjusts audio settings.

[VOL]
(PUSH SEL)

¡The screen brightness is toggled between

the set level and maximum luminance.

[DIM]
(DIMMER)

i AV1 IN

Display

TILT

DIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

DIM

CQ-VX100U

CQ-VD5005W

CLOSEDIMMER

TILT

OPEN

TEXT

VOL

PUSH

SEL

MUTE

SETUP

DIMMER

DIM

VOL

PUSH

SEL

MUTE

SETUP

POWER

SOURCE

TUNE/ TRACK

TILT

OPEN

POWER

SOURCE

CQ-VX100U

TUNE/ TRACK

AV1 IN

AV1 IN

12

English

13

CQ-VX100U

Anti-Theft System

Caution

¡ Be sure to follow the procedure mentioned above to mount the face plate appropriately. Improper mounting such

as forcible mounting without engaging the concave parts with the convex parts may cause trouble.

¡ Use caution not to damage the detection switch while mounting the face plate. Failure to observe this may cause

trouble.

¡ Use caution not to apply excessive force to the removed face plate when the plate is carried or stored. Failure to

observe this may cause trouble.

¡ This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡ Do not remove the face plate while driving your car.
¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high.

Face Plate Removal Alarm

This alarm sounds to warn you not to forget to remove
the face plate before leaving your car.
This function is activated when is set to

). (

a

page 33)

On

Security Alarm

This unit is equipped with a removable face plate.
Removing this face plate makes the unit totally inopera­ble.

Install the Face Plate

q

Engage the right and left concave parts (A) on the
lower rear side of the face plate with the convex parts
(B) of the main unit.

w Raise and press the face plate toward the main unit

until a click is heard while engaging (A) with (B).

Removable face plate

Remove the Face Plate

q

Switch off the power of the unit.

w Hold the top and bottom of the center part of the face

plate and pull it down toward you.

e Pull the face plate toward you.
r Place the face plate into the case and take it with you

when you leave the car.

w

e

(B)

(B)

(A)

(A)

q

w

Detection switch

DIMMER

DIM

VOL

PUSH

SEL

MUTE

SOURCE

POWER

SETUP

CQ-VX100U

TUNE/TRACK

TILT

OPEN

AV1 IN

14

CQ-VX100U

13

English

Touch Panel Operation Overview

The State of Operation Screen

❒ Notes on the Touch Panel

Before operation

¡Clean the surface of the touch panel. (a page 43)

Operation

¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any

hard objects.

¡Do not use a pen or other sharp implements to

operate the touch panel.

¡Do not bump the front panel.

a Failure to observe the above may damage or

break the glass on the surface of the touch
panel.

Prohibition

Input is not possible
because the user has
attempted to perform
an operation which is
not supported by the
disc contents.

Displays the Source Selection Screen.

Example: DVD mode

Displays the Setup Screen.

Screen Button

(a page 34)
(only for video source)

Note

:

¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.

Source Selection Screen appears.
Touch desired source button.

Touch to quit.

Note

:

¡The screen above appears when no external device is

connected to this unit.

Source Selection Screen Setup Screen

Setup Screen appears. Select desired setting.

Setup menu, (a page 30)

Press [SOURCE] to change to desired source.

Press [SETUP] to let Setup Screen appear.

Source Button

Setup Button

(Content varies with each source)

Sound Button (a page 35)

Aspect Button

(a page 34)
(only for video source)

Clock time

(a page 32)

Disc indicator (a page 19)
(Lights when a disc is loaded)

14

English

15

CQ-VX100U

Note:

¡

Refer to the instructions of each source.

¡ To switch Operation Screen on, touch the center of touch panel. (Touch to cancel)
¡ If no operation takes place for more than 10 seconds when Operation Screen is ON, Operation Screen is turned off.

Switching the Display

Touch .

Touch .

Audio Source

❒ CD

Video Source

❒

DVD

❒

DivX

Operation Screen List Screen

Touch .

Touch .

Touch .

Touch .

Touch .

Operation Screen 1 Operation Screen 2

Operation Screen 1 Operation Screen 2 List Screen

Touch . Touch .

Touch .

Touch .

Operation Screen 1
(folder/file name)

Operation Screen 2
(ID3 tag)

List Screen

❒

MP3

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.