Panasonic CQ-RX200U, CQ-RX100U, CQ-RX100L Service Manual

ORDER NO. ACED071207C7

AUTOMOTIVE AFTERMARKET

CQ-RX200U CQ-RX100U CQ-RX100L

WMA MP3 CD Player/Receiver

C4

TABLE OF CONTENTS

PAGE P AGE

1 Service Navigation ----------------------------------------------- 2 2 Specifications ----------------------------------------------------- 3 3 Features ------------------------------------------------------------- 4 4 T ec hnic al Desc ri ptions----------------------------------------- 5 5 Block Diagram----------------------------------------------------- 9 6 Wiring Connection Diagram---------------------------------12 7 Schematic Diagram---------------------------------------------13 8 Schematic Diagram-2------------------------------------------16

9 Printed Circuit Board-------------------------------------------17 10 Exploded View and Replacement Parts List -----------21 11 Schematic Diagram for Printing with Letter Size-----38

1 Service Navigation

1.1. About Lead Free Solder (PbF)

Distinction of PbF PCB :

• PCBs (manufactured) using lead free solder will have a Pb F stamp on the PCB.

Caution :

• Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 700 ± 20°F (370 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F/600°C)

1.2. Laser Products

1.4. Maintenance

Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a soft cloth for routine exterior

cleaning. Never use benzine, thinner or other solvents.

1.5. Notes

[RADIO BLOCK]

Do not align the AM/FM package block. When the package block is necessary, it will be supplied alrea dy alig ned at the factory.

[CD DECK BLOCK]

This model has no servo alignment points because microcomputer controls the servo circuit.

1.3. Replacing the Fuse

Use fuses of the same s pe cif ied rati ng 15 a mps. Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fu se, could cause fire or damage to th e st ere o unit.

2

2 Specifications

2.1. Specifications*

General

Power Supply DC 12V (11V - 16V)

Current Consumption Less than 2.1A

Maximum Power Output 50W × 4 (at 1kHz), volume control maxi-

Tone/SQ Adjustable Range

Speaker Impedance 4 - 8 Ω Pre-amp Output Voltage 2.0 V (CD mode: 1 kHz, 0 dB) Pre-amp Output Impedance Front AUX Input Input Impedance Allowable External Input Connector

Test Voltage 14.4V Negative Ground

(CD mode, 0.5W 4-Channels)

mum SQ Low/Bass:±12dB (at 60 Hz, 80 Hz, 100 Hz, 200Hz) SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3kHz) SQ High/Treble: ±12 dB (at 10kHz, 12kHz, 15 kHz, 18 kHz)

200 Ω

10 kΩ

2.0 V

3.5 mm Stereo mini-pin

2.2. Dimensions

Dimensions (W×H×D)** 178×50×160mm (7”×1-5/16"×6-5/16") Weight** 1.2 kg (2 lbs. 10 oz)

Disc Player

Sampling Frequency 8 times oversampling DA Converter 1 bit DAC System Pick-Up Type Astigma 3-beam Light Source Semiconductor Laser Wave Length 790 nm Frequency Response 20 Hz - 20 kHz (±1 dB) Signal to Noise Ratio 96 dB Total Harmonic Distortion Wow and Flutter Below Measurable Limits Channel Separation 85 dB

FM Radio

Frequency Range 87.9 MHz - 107.9 MHz Usable Sensitivity 10.2 dBf (0.9 µV, 75 Ω) 50 dB Quieting Sensitivity Frequency Response 30 Hz - 15 kHz (±3 dB) Alternate Channel Selectivity Stereo Separation 35 dB (at 1 kHz) Image Rejection Ratio 55 dB IF Rejection Ratio 100 dB Signal to Noise Ratio 62 dB

AM Radio

Frequency Range 530 kHz - 1710 kHz Usable Sensitivity 27 dB/µV (22µV, S/N 20 dB)

0.01 % (1 kHz)

15.2 dBf (1.6 µV, 75Ω)

75 dB

* Specifications and the design are subject to possible modification without notice due to improvements. ** Dimensions and Weight shown are approximate. ** Above specifications comply with EIA standards.

3

3 Features

• SQ3 (3-Band Sound Quality).

• The AUX Input terminal is equipped on the front panel.

• Expansion Module (The optional Hub unit: CY-EM100U) [CQ-RX200U only].

• The optional adapter (Direct Cable for iPod, CA-DC300U) allows you to connect the optional iPod® series.

• The optional adapter (Conversion Cable for DVD/CD Changer:CA-CC30U) allows you to connect the optional Panasonic CD changer unit (CX-DP880 U ).

• XM Satellite Radio. (The optional XM receiver: XMD1000)

• Sirius Satellite Radio. (The optional Sirius Satellite receiver: SIR-PAN1)

• Hands Free Phone System. (The optional Bluetooth handsfree kit: CY-BT200U)

• MP3/WMA Playback from CD-R/RW.

• Anti-Theft System.

• This manual is for 3 models CQ-RX200U, CQ-RX100U and CQ-RX100L. The following table describes the differences between 3 models.

4

4 Technical Descriptions

4.1. Terminals Description

4.1.1. Main Block

IC601 : YESAM434 (CQ-RX200U)

No

1 DBGP0 Not used - 0 0 0 2 DBGP1 Not used - 0 0 0 3 DBGP2 Not used - 0 0 0 4 RDS CLK Not connected - 2.5 2.5 2.5 5 RM DATA Remote control data I 4.6 4.6 4.6 6 CDC STB/

7 EVENT Hub event detection I 0 0 0 8 RESET System rese t I 4.9 4.9 4.9 9 XT1 Crystal oscillator 1

10 XT2 Crystal oscillator 2

11 VSS Ground - 0 0 0

12 CF1 Ceramic oscillator 1

13 CF2 Ceramic oscillator 2

14 VDD +5V power supply - 5.0 5.0 5.0 15 INI A Initialization mode A

16 VSM S ignal meter intensity

17 INI B Initialization mode B

18 USB FLG Not connected - 0 0 0 19 USB RESET Not connected - 0 0 0 20 NC Not connected - 0 0 0 21 SYSID1 Hub connection device ID 1I5.05.05.0

22 SYSID2 Hub connection device ID 2I5.05.05.0

23 USB MUTE Not connected - 0 0 0 24 CDC DATA Serial data from CD

25 CDC CLK/

26 CD DI (CD SI) Serial data to CD O 0 0 3.0 27 CD DO (CD

28 CD CLK Serial clock for CD O 0 0 3.0 29 CD CE (FS) Chip enable for CD O 0 0 0.9 30 NC Not connected - 0 0 0 31 NC Not connected - 0 0 0 32 NC Not connected - 0 0 0 33 SUB READY0 Sub ready from CD servo I 5.1 5.1 4.9 34 REG READY0 Reg. ready from CD servo I 5.1 5.1 0 35 CD SW1 CD detection switch 1 I 4.9 4.9 4.9 36 CD SW2 CD detection switch 2 I 4.9 4.9 4.9 37 CD DMUTE CD mute I 0 0 5.1 38 CD LIMIT SW CD limit detection switch I 5.1 5.1 5.1 39 VSS Ground - 0 0 0 40 VDD +5V power supply - 4.9 4.9 4.9 41 CD MUTE Mute for Pick-up driver O 0 0 0 42 CD S/L CD Sleding/Loading mode

Port Description I/O Vol [V]

SYSID4

SYSID3

SO)

CD changer Strobe; or Hub connection device ID 4

(32.768kHz)

(13.50MHz)

(RX200U: Pulled up; Others: Pulled down)

(Tuner)

(Pulled down)

changer Serial clock for CD changer; or Hub connection device ID 3

Serial data from CD I 3.2 3.2 2.2

switch

I0 0 0

I1.01.01.0

O1.41.41.4

I1.41.41.4

O1.31.31.3

I4.94.94.9

I0 0 0

O4.94.94.9

FM AM CD

Pin No

43 CD F/R CD loading direction: For-

44 CD RESET CD reset O 4.9 4.9 4.9 45 HUB ACC

46 HUB CNT Hub connection check

47 USB ENBL Not connected - 0 0 0 48 USB SLP Not connected - 0 0 0 49 LCD DI Serial data to LCD O 4.9 4.9 4.9 50 LCD DO Serial data from LCD I 4.3 4.3 4.3 51 LCD CLK Serial clock for LCD O 4.9 4.9 4.9 52 LCD CE Chip enable for LCD CPU O 0 0 0 53 E-VOL I2C

54 E-VOL I2C

55 VDD +5V power supply - 4.9 4.9 4.9 56 VSS Ground - 0 0 0 57 E-VOL MUTE Not connected - 0 0 0 58 POWER CNT System power supply con-

59 STBY Standby mode for Power

60 NC Not connected - 0 0 0 61 NC Not connected - 0 0 0 62 SUB CLK

63 NC Not connected - 0 0 0 64 BEEP Beep tone O 0 0 0 65 USB IN Not connected - 0 0 0 66 ACC ACC level detection I 5.2 5.2 5.2 67 NC Not connected - 0 0 0 68 MODE B Rotary encoder detection

69 MODE A Rotary encoder detection

70 EXT MUTE Not connected - 0 0 0 71 PANEL IN Front panel detection I 4.9 4.9 4.9 72 BATT Battery level detection I 4.6 4.6 4.6 73 RDS DATA Not connected - 2.5 0 0 74 CDC REM

75 HUB-TX Transmission data to Hub O 0 0 0 76 HUB-RX Reception data from Hub I 0 0 0 77 USB RXD Not connected - 0 0 0 78 USB TXD Not connected - 0 0 0 79 FM MODE Power supply control for

80 AM MODE Power supply control for

81 MONO Not connected - 0 0 0 82 ST FM stereo indication I 5.1 5.1 5.1 83 DI/DO Serial data for EEPROM I/O 0 0 0 84 CS Chip select for EEPROM O 0 0 0 85 SK Serial clock for EEPROM O 0 0 0 86 NC Not connected - 0 0 0 87 VREG Connected to capacitor - 3.0 3.0 3.0 88 VSS Ground - 0 0 0 89 VDD (PLL) +5V power supply - 5.0 5.0 5.0 90 OSC FM/AM FM/AM local oscillation

91 NC Ground - 0 0 0 92 FM/AM IFC FM/AM center frequency I 0 0 0 93 NC Ground - 0 0 0 94 EO FM/AM phase detection

Port Description I/O Vol [V]

O0 0 0

ward/Reverse

CNT

DATA

CLK

OUT

Power supply control for Hub (External device)

request

Serial data for Audio signal processor (volume) Serial clock for Audio signal processor

trol

amplifier

Not connected - 0 0 0

B for volume

A for volume

Remote control for CD changer

FM mode

AM mode

frequency

error

O0 0 0

O 4.9 4.9 4.9

I 5.0 5.0 5.0

O0 0 0

O4.9 0 0

O04.90

I 1.4 1.4 1.4

O 2.2 2.2 2.2

FM AM CD

5

No 95 SUBPD Not connected - 0 0 0 96 SSC SD sensitivity control O 0 0 0 97 ANT CNT Not connected - 4.9 4.9 4.9 98 AMP CNT Not connected - 4.9 4.9 4.9 99 AF MUTE Audio signal mute O 0 0 0

100 AM P MUTE Mute for Power amplifier O 4.9 4.9 4.9

Port Description I/O Vol [V]

FM AM CD

IC601 : YESAM430 (CQ-RX100U/RX100L)

Pin No

1 DBGP0 Not used - 0 0 0 2 DBGP1 Not used - 0 0 0 3 DBGP2 Not used - 0 0 0 4 RDS CLK Not connected - 2.5 2.5 2.5 5 RM DATA Remote control data I 4.6 4.6 4.6 6 CDC STB/

7 EVENT Not connected - - - 8 RESET System reset I 4.9 4.9 4.9 9 XT1 Crystal oscillator 1

10 XT2 Crystal oscillator 2

11 VSS Ground - 0 0 0 12 CF1 Ceramic oscillator 1

13 CF2 Ceramic oscillator 2

14 VDD +5V power supply - 5.0 5.0 5.0 15 INI A Initialization mode A

16 VSM Signal meter intensity

17 INI B Initialization mode B

18 USB FLG Not connected - 0 0 0 19 USB RESET Not connected - 0 0 0 20 NC Not connected - 0 0 0 21 SYSID1 Not connected - - - 22 SYSID2 Not connected - - - 23 USB MUTE Not connected - 0 0 0 24 CDC DATA Serial data from CD

25 CDC CLK/

26 CD DI (CD SI) Not connected - - - 27 CD DO (CD

28 CD CLK Serial clock for CD O 0 0 3.0 29 CD CE (FS) Chip enable for CD O 0 0 0.9 30 NC Not connected - 0 0 0 31 NC Not connected - 0 0 0 32 NC Not connected - 0 0 0 33 SUB READY0 Sub ready from CD servo I 5.1 5.1 4.9 34 REG READY0 Reg. ready from CD servo I 5.1 5.1 0 35 CD SW1 CD detection switch 1 I 4.9 4.9 4.9 36 CD SW2 CD detection switch 2 I 4.9 4.9 4.9 37 CD DMUTE CD mute I 0 0 5.1 38 CD LIMIT SW CD limit detection switch I 5.1 5.1 5.1 39 VSS Ground - 0 0 0 40 VDD +5V power supply - 4.9 4.9 4.9 41 CD MUTE Mute for Pick-up driver O 0 0 0 42 CD S/L CD Sleding/Loading mode

43 CD F/R CD loading direction: For-

44 CD RESET CD reset O 4.9 4.9 4.9 45 HUB ACC

46 HUB CNT Not connected - - - 47 USB ENBL Not connected - 0 0 0 48 USB SLP Not connected - 0 0 0 49 LCD DI Serial data to LCD O 4.9 4.9 4.9 50 LCD DO Serial data from LCD I 4.3 4.3 4.3 51 LCD CLK Serial clock for LCD O 4.9 4.9 4.9

Port Description I/O Vol [V]

FM AM CD

Not connected - - - -

SYSID4

I 1.0 1.0 1.0

(32.768kHz)

O 1.4 1.4 1.4

(32.768kHz)

I 1.4 1.4 1.4

(13.50MHz)

O 1.3 1.3 1.3

(13.50MHz)

I 4.9 4.9 4.9 (RX200U: Pulled up; Others: Pulled down)

I0 0 0 (Tuner)

I0 0 0 (Pulled down)

I0 0 0 changer Not connected - - - -

SYSID3

Serial data from CD I 3.2 3.2 2.2

SO)

O 4.9 4.9 4.9

switch

O0 0 0

ward/Reverse

Not connected - - - -

CNT

6

No 52 LCD CE Chip enable for LCD CPU O 0 0 0 53 E-VOL I2C

54 E-VOL I2C

55 VDD +5V power supply - 4.9 4.9 4.9 56 VSS Ground - 0 0 0 57 E-VOL MUTE Not connected - 0 0 0 58 POWER CNT System power supply con-

59 STBY Standby mode for Power

60 NC Not connected - 0 0 0 61 NC Not connected - 0 0 0 62 SUB CLK

63 NC Not connected - 0 0 0 64 BEEP Not connected - - - 65 USB IN Not connected - 0 0 0 66 ACC ACC level detection I 5.2 5.2 5.2 67 NC Not connected - 0 0 0 68 MODE B Rotary encoder detection

69 MODE A Rotary encoder detection

70 EXT MUTE Not connected - 0 0 0 71 PANEL IN Front panel detection I 4.9 4.9 4.9 72 BATT Battery level detection I 4.6 4.6 4.6 73 RDS DATA Not connected - 2.5 0 0 74 CDC REM

75 HUB-TX Not connected - - - 76 HUB-RX Not connected - - - 77 USB RXD Not connected - 0 0 0 78 USB TXD Not connected - 0 0 0 79 FM MODE Po wer supply control for

80 AM MODE Power supply control for

81 MONO Not connected - 0 0 0 82 ST FM stereo indication I 5.1 5.1 5.1 83 DI/DO Not connected - - - 84 CS Not connected - - - 85 SK Not connected - - - 86 NC Not connected - 0 0 0 87 VREG Conne cted to capacitor - 3 .0 3.0 3. 0 88 VSS Ground - 0 0 0 89 VDD (PLL) +5V power supply - 5.0 5.0 5.0 90 OSC FM/AM FM/AM local oscillation

91 NC Ground - 0 0 0 92 FM/AM IFC FM/AM center frequency I 0 0 0 93 NC Ground - 0 0 0 94 EO FM/AM phase detection

95 SUBPD Not connected - 0 0 0 96 SSC SD sensitivity control O 0 0 0 97 ANT CNT Not connected - 4.9 4.9 4.9 98 AMP CNT Not connected - 4.9 4.9 4.9 99 AF MUTE Audio signal mute O 0 0 0

100 AM P MUTE Mute for Power amplifier O 4.9 4.9 4.9

Port Description I/O Vol [V]

DATA

CLK

OUT

Serial data for Audio signal processor (volume) Serial clock for Audio signal processor

trol

amplifier

Not connected - 0 0 0

B for volume

A for volume

Not connected - - - -

FM mode

AM mode

frequency

error

O4.94.94.9

I5.05.05.0

O4.9 0 0

O04.90

I1.41.41.4

O2.22.22.2

FM AM CD

4.2. IC Block Diagram

4.2.1. Main Block

IC201 : YESAM440

IC271 : C1EA00000041

IC671 : YESAM391

IC751 : YESAM424

7

IC791 : YESAM344 (CQ-RX200U only)

4.2.2. Display Block

IC901 : YESAM427

IC851 : YESAM437

IC852 : YESAM439

8

5 Block Diagram

5.1. Main-1 Block

REAR

LR

7231-02-21(1/3)

CN250

CN701

AT51

PA51

FM / AM TUNER

AM ANT

1 2 FM ANT

AM VT

FM VT

Q401

L-CH

R-CH R-CH

212011146

22

VSM

SD / ST IND

FM / AM IFC

FM / AM OSC

RU200U ONLY

HUB L

CD L

AUX L

16 1

17

Q52,602

TU+B

POW

SW

POW

SW

BATT

IC201

AUDIO SIGNAL PROCESSOR

MUTE

5

3

INPUT

7

SEL

VOLUME

TONE

FADER

FL

16

RL

R-CH

Q366

SW

Q261

IC271

POWER AMP

12

5 3

FL+ FL-

ACC

AMP CNT

R-CH

FR+ FR-

15

RL+

14

21 23

RL-

21

43

65

87

10 9

1211

SDA

SCLK

1819

STBY

MUTE

R-CH

224

RR+

RR-

1413

RX200U ONLY

IC602

Q251

1615

EEPROM

FM VCC

DO

DI

SK

CS

2

1

3

4

AM VCC

XL602

32.8KHz

XL601

13.5KHz

EO

Q55,601

85

16929094

82

80

AM MODE

79

FM MODE

5453

SDA

E-VOL

I2C

SCLK

83

DI/DO

84

SK

CS

9

XT110XT2

99

AF MUTE

59

STBY

100

AMP MUTE

12

CF113CF2

IC601(1/3) SYSTEM CONTROL

CQ-RX200U/RX100U/RX100L MAIN (1/3)

9

5.2. Main-2/D is pl ay Block

7231-05-11 7231-02-21(2/3)

LD901

KEY-IN

MATRIX

IC901

LCD DRIVE

SEG 1–34

3–36

COM 1–4

KS 3–6

KI 2–5

50–53 45–48 39–42

2

Q902

LED

DRIVE

P2

DI

DO

CL

CE

VDD

P1

64 61 63 62

54

Q901

1

D901

SOURCE

L-CH

PWR

SW

IC902

IR

RECEIVE

SW901

5V

IC601(2/3)

L-CH R-CH

DATA REMO

SCLK STRB HCNT EVENT

SYS ID1 SYS ID2

ACC

CN671

3

456

78910

11 12

2131

10 11 13 12

5

6

10 11 13 12

5

6

SYSTEM CONTROL

CN971CN901

49

LCD DI

50

LCD DO

51

LCD CLK

52

LCD CE

HUB TX

HUB RX

CDC DATA

CDC REMO

CDC CLK

VDD5V2

CDC STB HUB CNT

EVENT

71

PANEL

IC701

64BEEP 75 76 24 74 25

6

46

7

21

HUB L

6 3

8 12 11

2

IC671

INV

R-CH

5 4

9 13 10

1

22

72

BATT

CHECK

15 3

BATT

8

RESET

BATT

1

IC791

15V

LIMIT

3

2

HUB ACC

REMO

9

1

9

5

RM DATA

CNT

45

RX200U ONLY

IC751

MODE A

8

MODE B

7

2

AUX L

69

MODE A

68

MODE B

ACC

AMP CNT

PWR CNT

66 98 58

ACC

9

VCC

3

ACC

2

COMP MODE 2

11

MODE 1

6

1 4

10

13

SW5VBATT VDD5V2 VDD5V1

Q752

POW

SW

AMP CNT

Q770

AUD9V TU+B

DELAY START

POWER DISPLAY

BATT

CN902

AUX

R-CH

ILL10V

Q751

DSP

12

POW

DSP3.3V

SW

1515

15

CD

7

CD+B

CQ-RX200U/RX100U/RX100L MAIN(2/3)/DISPLAY

10

5.3. Main-3/CD Interface Block

A

B

E

F

PD

LD

I-V

AMP

CN2CN2 CN1

7

9

3

2

11

4

10

1

LPD

LD3.3V

VREF

VCC

7231-02-21(3/3)3032-14-53Optical Pic-up Ass'y

IC801

RF AMP,SERVO,DSP

CN801

A

B

E

F

21

22

1

3

4

2

8

Q871

21

6

22

LD

DRIVE

DSP3.3V

5 6 7 8

14

13

19

18

11

A

C

B

D

F

E

-

LDS

LDO

VREF

+

-

FE

TE

SERVO

CTL

FDO

TDO

ADC

SLDO

SPDO

EFM DEM

LIMIT SW

X IN

733224252322

XL801

16.93MHz

X OUT

72

L-CH

DAC

R-CH

DO

DI

CL

CE

CD MUTE

RESB

SUB READY

REG READY

76 78

46 45 44 43 50 47

49 48

R-CH

CD L

IC601(3/3)

SYSTEM CONTROL

27 CD DO 26

CD DI 28 CD CLK 29 CD CE 37 CD MUTE 44 CD RESET

33 SUB READY 34

REG READY

FOCUS

COIL

TRACKING

COIL

SPINDLE

MOTOR

SLED

MOTOR

IC851

PICK-UP DRIVE

16 15

14 13

M

CD LIMIT SW

F+

F-

T+

T-

SP+

SP-

SL+

SL-

CD SW1 CD SW2

14 16

18 20

10 12

17 15

19

14 16

18 20

10 12

7

5

17 15

19

2 1

26 27

11 12

17 18

FOCUS

COIL

DRIVE

TRACKING

COIL

DRIVE

SPINDLE

MOTOR

DRIVE

SLED

MOTOR

DRIVE

MUTE

4

24

7

9

20

IC852

67

5

1

43 CD F/R 42 CD S/L

37 CD DMUTE

35 CD SW1 36 CD SW2 38 CD LIMIT SW

11

CQ-RX200U/RX100U/RX100L MAIN(3/3)/CD INTERFACE

6 Wiring Connection Diagram

CQ-RX200U only

14

12

13

12

CN671

16

11

15

13 1

CN701

4

/

4

/

Power Connector

2

Main P.C.B

[7231-02-11]

Rear Speakers

Front Speakers External Amplifier Control Motor Antenna Relay Control Battery(15A)

Ground Power (ACC or IGN)

Preamp Out (Rear)

CN250

AT051

Optical Pic-Up

Ass'y

SW2

SW1

Loading/Feed

Limit

1

22 21

SW

Motor

Spindle

Motor

CN2

16

2 1

CN1

CD Interface P.C.B

[3032-14-53]

(Bottom View)

22

21

2

1

CN801

Display P.C.B

[7231-05-11]

(Bottom View)

CN971

15

CN901

2

1

CN902

CN903

AUX

54

4

1

Extension

3

1

2

CQ-RX200U only

Connector Jig Part No. [YESFZS2076]

12

7 Schematic Diagram

7.1. Main Block[CQ-RX200U]

7231-02-11

YESAP387

YESAN149

8.0

7.2

YESAD191

YESAD155

0 0

0

8.2

0

1.3 0 0 0 0 0

8.1

8V

1.3 0

L

3.6

3.6 0

0 0

5.1

0

8.1

8V

8.0

8.1

8V

8.2

YESAN154

R

YESAN152

8.1 0

0

4.9

0

YESAN152

YESAD188

9V

YESAN153

5.0

0

5.0

L

YESAN153

0

L

0

YESAN155

0

YESAN155

R

0.027

L

R

L

R

L

3.2

YESAM440

8.8

5.0

4.0

L

4.0

0

R

5V

L

R

YESAD167

9V

R

L

9V

L

R

L

9V

5V

R

YESAM436

2.2

B1CBGF000005

L

R

CN901

YESAD150

YESAD144

Pin No.

Waveform

PIN49

2V/DIV,10mS/DIV

PIN51,PIN52

1.3

YESAM434

0

1000P

0.5V/DIV,10uS/DIV

5V

1V/DIV,10uS/DIV

1V/DIV,20nS/DIV

2V/DIV,50mS/DIV

47K

7231-05-11

YESAD143

5V

YESAD155

R

10V

YESAD149

YESAD189

0

5.0

4.9

YESAM391

0

4.0

5.0

YESAD133

0

5V

YESAD144

5V

YESAD188

0

L

R

L

R

L

R

L

5V

47K

3.1

3.3V

R

6.3V100

0

1.5 0

3.1

0

1.5

3.1

L

1.5

1.5 0

1.6

7.3

4.9

14.4

L

R

L

16V10

12K

9V

5V

0

1V/DIV,20nS/DIV

1.5

2.1

1.6

3.3V

0

4.9

CN1

3032-14-53

10V

7.2

YESAD192

0

1.7

7.2

0

1.7

0

YESAD192

1.7

5V

7.2

7.3

YESAD192

3.1

1.8

C1EA00000041

0

7.3

7.4

R

YESAD192

5V

47K

5.1

1V/DIV,5uS/DIV

YESAM428

1.7

1.6

1/4W

3.2

7.3

14.4

16V22

YESAD192

4.9

1V/DIV,5uS/DIV

0

3.3V

0

L

1/4W

3.2

YESAN156

5.0

YESAD192

0

1.9

0

7.3

L

AMP,

L

ANT_CNT

L

R

L

YESAD192

3.3V

3.1

00

0.9

3.0

2.2

4.9

1V/DIV,10mS/DIV

1.6

1.9

1.6

3.2

2.4

0

3.1

1.5

6.3V100

0

3.1

3.1 0

5.1

3.1

1.1

1.2

1.2 0

1.7

1.6

1.5

3.2

0

3.3V

3.8

3.5

0

8.0

1.6

YESAM437

3.4

3.8

1.6

4.9

YESRTD016

YESAD193

1/4W

YESLT032

5V

3.3V

8V

8.0

1.6

0

1.6

8V

YESAN157

3.3

4.0

3.6

3.3

3.9

5V

0

7.4

YESAM439

5.0

0

7.4

YESAM441

5.0

4.9

YESAD192

3.3V

0

1.605.1

4.9

0

4.6

5.0

YESAM344

YESAD192

0

14.3

5.6

YESAN079

5V

8V

14.0

9V

13.4

10V

1.5

10V

5.1

5.2

6.4

5.0

4.9

8.0

3.2

9.1

1.2

9.5

4.9

0

YESAM424

YESAD196

YESAD197

YESAD198

13

CQ-RX200U MAIN

7.2. Main Block[CQ-RX100U/RX100L]

7231-02-11

YESAP387

YESAN149

8.0

7.2

YESAD191

YESAD155

0 0

0

8.2

0

1.3 0 0 0 0 0

8.1

8V

1.3 0

L

3.6

3.6 0

0 0

5.1

0

8.1

8V

8.0

8.1

8V

8.2

YESAN154

R

YESAN152

8.1 0

0

4.9

0

YESAN152

YESAD188

9V

YESAN153

5.0

0

5.0

L

R

2.2

B1CBGF000005

L

R

CN901

7231-05-11

YESAD150

R

YESAD155

YESAD149

10V

YESAD189

YESAN153

0

L

0

YESAN155

0

YESAN155

R

0.027

L

R

L

3.2

YESAM440

8.8

5.0

4.0

L

4.0

0

R

L

R

L

R

L

R

0

7.3

4.9

14.4

L

R

L

16V10

12K

9V

7.2

YESAD192

7.2

YESAD192

0

5V

7.2

7.3

YESAD192

C1EA00000041

0

7.3

7.4

R

YESAD192

5V

14.4

16V22

YESAD192

0

7.3

5.0

7.3

L

YESAD192

L

R

L

AMP,

ANT_CNT

YESRTD016

YESAD193

1/4W

YESLT032

5V

4.6

YESAM441

5.0

4.9

0

5.0

R

YESAD167

9V

5V

R

9V

YESAD144

L

YESAM430

1.3

0

1000P

0.5V/DIV,10uS/DIV

5V

YESAD143

5V

1V/DIV,10uS/DIV

1V/DIV,20nS/DIV

47K

Waveform

2V/DIV,10mS/DIV

2V/DIV,50mS/DIV

9V

Pin No.

PIN49

PIN51,PIN52

5V

YESAD133

5V

10V

47K

0

47K

3.1

3.3V

R

6.3V100

0

1.5 0

3.1

0

1.5

3.1

L

1.5

1.5 0

1.6

0

1V/DIV,20nS/DIV

1.5

2.1

1.6

1.7

3.3V

CN1

3032-14-53

47K

5.1

3.1

0

4.9

1V/DIV,5uS/DIV

0

4.9

00

0.9

3.0

2.2

1V/DIV,10mS/DIV

YESAM428

1/4W

3.2

YESAN156

1.6

1.9

0

1.6

3.2

2.4

3.3V

0

3.8

0

1.7

1.6

1.8

1.7

3.3V

1/4W

3.2

0

3.3V

3.1

0

3.1

1.5

0

3.1

3.1 0

5.1

3.1

1.1

1.2

1.2 0

1.7

1.6

1.5

3.2

0

3.3V

3.8

3.5

1.6

3.4

1.6

6.3V100

8.0

YESAM437

4.9

5V

3.3V

YESAN157

3.3

3.3V

4.0

8V

8.0

1.6

0

1.6

7.4

3.6

0

7.4

3.3

3.9

5.0

5.6

4.9

YESAN079

YESAD192

5V

8V

14.0

9V

13.4

3.3V

10V

8V

5V

1.5

0

YESAM439

5.0

10V

1.605.1

5.1

5.2

6.4

5.0

4.9

8.0

3.2

9.1

1.2

9.5

4.9

0

YESAM424

YESAD196

YESAD197

YESAD198

14

CQ-RX100U/CQ-RX100L MAIN