READ THIS FIRST
START HERE
Here’s what you’ll do:
•Charge and set up your Palm™ Tungsten™ T3 handheld.
•Install Palm™ Desktop software.
•Learn to use your handheld.
Contents
Note!
You must install the version of Palm Desktop software included in this package in order to synchronize and to support all the features of your handheld.
USB HotSync® cradle
Power adapter
Palm Tungsten T3 handheld
Software Installation CD
1Connect
a.Connect the HotSync® cradle to the computer.*
b.Plug the adapter into an outlet and into the cradle.
USB
*Systems without USB ports require a serial cradle (sold separately).
2Charge
a.Place your Tungsten T3 handheld in the cradle.
b.Make sure that the indicator light is solid green. This means your handheld is properly seated in the cradle and is being charged.*
c. Charge for at least two full hours.
Indicator light
*Problems? See “Troubleshooting” in the upcoming pages.
3Set up
a. Remove the handheld from the cradle.
1. Tilt it forward.
2. Lift up.
b.Turn on the handheld by pressing the power button.*
Power button
Stylus
Gently press the top of the stylus to remove it.
c.Remove the stylus.
d.Follow the instructions onscreen.
* Problems? See “Troubleshooting” in the
upcoming pages.
Loading...