Page 1
C-70 ZOOM / C-7000 ZOOM
E. NOTICE OF MODIFICATION
[1] Version-up of firmware 1 .............................................................................. E-2
[2] Discontinuance of BACK SWITCH UNIT HOLDER B ................................ E-3
[3] Version-up of firmware 2 .............................................................................. E-4
[4] Changed spacer wire LCD .......................................................................... E-5
Rev.1
E-1 Ver.1
Page 2
E. NOTICE OF MODIFICATION
SUBJECT Version-up of Firmware 1 2004.10.29
C-70 ZOOM / C-7000 ZOOM
DESCRIPTION : Change of firmware for C-70 ZOOM / C-7000 ZOOM
OLD NEW
For all destination : Ver. vx852-76 >>> Ver. vx852-78
REASON :Countermeasure of following items for C-70 ZOOM / C-7000 ZOOM.
1) "PICTURE ERROR" is displayed on the LCD monitor by following operations;
1. AV cable is inserted in the camera during close-up playback.
( It will return to normal playback. )
2. O.K. button is pushed twice.
REMARKS :
Refer to D-3 of Service manual about updating procedure.
OBJECT :
Update the firmware to all the returned cameras from the market .
E-2 Ver.1
Page 3
C-70 ZOOM / C-7000 ZOOM
SUBJECT Discontinuance of BACK SWITCH UNIT HOLDER B 2005.02.08
E. NOTICE OF MODIFICATION
DESCRIPTION : The repair parts have been discontinued.
PARTS NO. PARTS NAME
VG072300 BACK SWITCH UNIT HOLDER B
REASON : This parts have been unneccessery to make space between BACK COVER
and inner parts.
REMARKS : Running change.
OBJECT : The parts of VG072300 have been discontinued.
Rev.1
E-3Ver.1
Page 4
E. NOTICE OF MODIFICATION
SUBJECT Version-up of Firmware 2 2005.02.08
C-70 ZOOM / C-7000 ZOOM
DESCRIPTION : Change of firmware for C-70 ZOOM / C-7000 ZOOM
OLD NEW
For all destination : Ver. vx852-78 >>> Ver. vx852-79
REASON : Countermeasure of following items for C-70 ZOOM / C-7000 ZOOM.
1) Modified the defect that a line appears on the CCD.
2) Modified the defect occured when using xD card which has block failure.
3) Modified the defect occured while charging the strobe with low level battery.
REMARKS :
Refer to D-3 of Service manual about updating procedure.
OBJECT :
Update the firmware to all the returned cameras from the market .
Rev.1
E-4 Ver.1
Page 5
C-70 ZOOM / C-7000 ZOOM
E. NOTICE OF MODIFICATION
SUBJECT Changed spacer wire LCD 2005.02.08
DESCRIPTION : Changed form of spacer wire LCD (Addition of a break)
PARTS NO. PARTS NAME
VG071500 SPACER WIRE LCD
REASON : The LCD-sheet has changed to prevent damage of coating of the lead wire
REMARKS : Running change.
OBJECT : The lead wire through passes under the LCD-sheet.
2mm+/-0.5mm
5mm+/-0.5mm
Rev.1
E-5Ver.1
Loading...