OLYMPUS C-450 Zoom NOTICE OF MODIFICATION

E. NOTICE OF MODIFICATION

D-565ZOOM/C-450ZOOM

E. NOTICE OF MODIFICATION

Version-up of Firmware(1) ..............................................................................................E-2

Appearance change of parts .........................................................................................E-3

Rev.2

E-1 Ver.1

E. NOTICE OF MODIFICATION

D-565ZOOM/C-450ZOOM

SUBJECT

Version-up of Firmware (1)

2003.Sep.02

DESCRIPTION : The firmware for D-565ZOOM/C-450ZOOM is changed.

OLD NEW

v752-75 >>> v752-76

REASON : The modification of the following phenomenon

1. The recording to the memory card is not completed when the following operation is performed during
the recording to the card.

a: The changing of the image quality mode and the taking picture are repeated so that a buffer is not full.
b: The release button is kept pushing under the condition that memory card is almost full.

2. A blue frame is displayed on LCD monitor in the following operation.
a: QUICK-VIEW button is pushed when a memory card is full.

b: VIDEO-OUT cable is connected or disconnected.

3. A lens does not move when cover lens was opened after camera resetting was done in a cover lens

closed.
(camera reset:OK-button and QUICK-VIEW button are pushed at the same time in cover lens closed)

4. Indication of LCD monitor is separated into two parts when OK-button is pushed and a card cover

is opened after taking a photograph in LCD monitor is off.

5. USB communication fails on PC which VIA’s IC was built into.

REMARKS :update procedure

Refer to the D-3 of Service Maual .

OBJECT : Perform for all camera returned from a market.

E-2

Rev.1

Ver.1