OLYMPUS C-3000 Zoom, С-3030 Zoom Notice of Modification V3R6

C-3030ZOOM/C-3000ZOOM

E. NOTICE OF MODIFICATION

1. Change of Firmware1 (C-3030ZOOM).......................................................E-2

2. Change of Firmware2 (C-3030ZOOM).......................................................E-3

3. Change of Firmware3 (C-3000ZOOM).......................................................E-4

4. Correction of parts number.........................................................................E-5

SERVER_DIS E-1 Ver.3 Rev.6

E. Notice of Modification C-3030ZOOM/C-3000ZOOM

SUBJECT Change of Firmware(C-3030ZOOM) 2000.04.28
DESCRIPTION: Change of Firmware for C-3030ZOOM.

OLD NEW

NTSC(GUI:JAPANESE)

NTSC(GUI:ENGLISH)

V351-75 V351-76

V351u-75 V351u-76

REASON

Change of firmware due to improves the software.
[CONTENTS]

1) The picture is abnormal with sequence mode after taking a picture with template card.

2) Display the bar which stands for the position of manual focus.(Set the cursor to MF)
Successively set mode dial to display mode and enlarge the picture with zoom lever.
Press jog dial (up / down) for a while.
There are mixed characters of Rec mode and close-up mode.

3)The ISO automatically gains up until only 200 with AUTO ISO and LCD monitor on.
(Normally until 400. It gains up until 400 with LCD monitor off)

4)The display is abnormal on LCD monitor after taking a picture with template card and FL-40.

5)FL-40 doesn’t fire with the below condition.
LCD monitor is off under the condition that is FL-40 is on.

REMARKS

Please refer to C-2000Z/D-3 for a procedure of rewriting firmware.

Please execute the rewriting firmware to all C-3030Z that has been never modified to new firmware.

PAL version has been modified since initial products.

SERVER_DIS E-2 Ver.3