Nokia 2010 INTRODUCTION 01

INTRODUCTION

NHE–3
CONTENTS
1. Introduction
3. Quick Guide
4. Installation Instructions
5. PCLocals Service Software Instructions
6. Service Instructions
9415HK Technical Documentation
1–1
Copyright Nokia Mobile Phones
7. Transceiver Unit NHE–3
8. System Module GS8
9. Display Modules GU1 and GU2
10. Cigarette Lighter Charger LCH–2
11. Desktop Chargers CHH–2 and CHH–8
12. HF Junction Box HFJ–3
13. Mobile Base MCH–8
15. Handset HSU–1
18. Accessories
19. Service Accessories
INTRODUCTION
NHE–3
This document is intended for use by qualified service personnel only.
Company Policy
Our policy is of continuous development; details of all technical modifications will be included with service bulletins.
While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Ltd should be notified in writing.
Please state:
Title of the Document + Issue Number/Date of publication Latest Amendment Number (if applicable) Page(s) and/or Figure(s) in error
Please send to: Nokia Mobile Phones Ltd
9415HK Technical Documentation
IMPORTANT
PAMS Technical Documentation PO Box 86 24101 SALO Finland
1–2
Copyright Nokia Mobile Phones
INTRODUCTION
NHE–3
9415HK Technical Documentation

Warnings and Cautions

Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following:
Warnings:
1 CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED
WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.
2 THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED
IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
1–3
Copyright Nokia Mobile Phones
3 OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT,
Cautions:
1 Servicing and alignment must be undertaken by qualified personnel
2 Ensure all work is carried out at an anti–static workstation and that
3 Ensure solder, wire, or foreign matter does not enter the telephone
4 Use only approved components as specified in the parts list. 5 Ensure all components, modules screws and insulators are correctly
INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.
only.
an anti–static wrist strap is worn.
as damage may result.
re–fitted after servicing and alignment. Ensure all cables and wires are repositioned correctly.
INTRODUCTION
NHE–3
9415HK Technical Documentation
1–4
Copyright Nokia Mobile Phones
This page intentionally left blank.
Loading...