Nec DTERM IP 8D, DTERM IP 4D, DTERM IP 16D TECHNICAL SPECIFICATIONS

Dterm IP 4D Dterm IP 8D Dterm IP 16D

Network Parameters

Interface 10/100 base T

(IEEE 802.3), RJ45

Internet Layer All Models: IPv4
IP Protocol All Models: NEC Peer-to-Peer (only)
Jitter Buffer All Models: Max 300msec (10msec steps)
Payload Interval All Models: 10ms ~ 40ms (10ms steps)
IP Addressing All Models: DHCP or Static Assignable
QoS 801.p, ToS and Diff-Service

Equipment Specification Size (W x D x H)

Tilt up 7.57”x 8.69”x 5.57” 9.09”x 8.54”x 5.28” 9.09”x 9.57”x 5.28”
Tilt down 7.57”x 8.69”x 3.80”

(without stand unit)

Weight 1.98Ibs 2.51Ibs 2.51Ibs

Power Specification

External All Models: AC: 24V, Current 750mA
Inline and Spare Pair

Voltage:
Current:
Power Consumption:

Protocol Support:

Protocol Support (with
ILPA Integration):

Operating
Temperature

IP Telephony Equipment Requirements

UNIVERGE All Models

NEAX 2400 IPX All Models

NEAX 2000 IPS Model: 4

IEEE802.3af

With ILPA can support

CDP and NDP

Software: 3200 Series R 6.1 or greater

Dterm IP Terminal Specifications

48V

90mA

4.32W

10/100 base T

(IEEE 802.3), RJ45 multi-

port Switch

9.09”x 8.54”x 4.17” 9.09”x 9.57”x 4.17”

48V

92mA

4.42W

IEEE802.3af

and CDP (DIP Switch)

With ILPA can support

NDP

All Models: 0 – 40 deg C

Hardware: SV7000T

Software: FP30-100 R16 or greater

Software: FP20-100 R15 or greater

Software: 3300 Series R8 or greater

10/100 base T

(IEEE 802.3), RJ45 multi-

and CDP (DIP Switch)

With ILPA can support

Models: 8, 16, 32

port Switch

48V

92mA

4.42W

IEEE802.3af

NDP