INSTALLATION INSTRUCTIONS
W W W . N A T I V E T R A I L S . N E T
W W W . N A T I V E T R A I L S . N E T
W W W . N A T I V E T R A I L S . N E T
W W W . N A T I V E T R A I L S . N E T
3.5” BASKET STRAINER, DR320
INSTALLATION INSTRUCTIONS
3.5” BASKET STRAINER, DR320
1. Apply a small bead of
100% Silicone (non-water based) 100% Silicone (non-water based)
to the
flange (3).
1
2. Place strainer body (3)
into sink.
2
3. Place rubber seal (4) on
top of tailpiece (5).
3
4. Place tightening screw
4
5
(2) into center of strainer
body (3) and secure
(hand tighten, plus ¼
turn).
5. Lubricate (1) with liquid
soap. Place strainer
basket (1) into strainer
body (3).
6. Attach drainpipe to BSP
nut (6) not shown.
side of strainer body
1
2
3
4
5
1. Apply a small bead of
to the
2. Place strainer body (3)
3. Place rubber seal (4) on
4. Place tightening screw
5. Lubricate (1) with liquid
6. Attach drainpipe to BSP
side of strainer body
flange (3).
into sink.
top of tailpiece (5).
(2) into center of strainer
body (3) and secure
(hand tighten, plus ¼
turn).
soap. Place strainer
basket (1) into strainer
body (3).
nut (6) not shown.
Remove all excess putty around the drain after the drain has been installed
INSTALLATION INSTRUCTIONS
3.5” BASKET STRAINER, DR320
1. Apply a small bead of
100% Silicone (non-water based)
to the
flange (3).
side of strainer body
1
2. Place strainer body (3)
into sink.
2
3. Place rubber seal (4) on
top of tailpiece (5).
3
4. Place tightening screw
4
5
(2) into center of strainer
body (3) and secure
(hand tighten, plus ¼
turn).
5. Lubricate (1) with liquid
soap. Place strainer
basket (1) into strainer
body (3).
Remove all excess putty around the drain after the drain has been installed
INSTALLATION INSTRUCTIONS
3.5” BASKET STRAINER, DR320
1. Apply a small bead of
100% Silicone (non-water based)
to the
flange (3).
side of strainer body
1
2. Place strainer body (3)
into sink.
2
3. Place rubber seal (4) on
top of tailpiece (5).
3
4. Place tightening screw
4
5
(2) into center of strainer
body (3) and secure
(hand tighten, plus ¼
turn).
5. Lubricate (1) with liquid
soap. Place strainer
basket (1) into strainer
body (3).
6. Attach drainpipe to BSP
nut (6) not shown.
Remove all excess putty around the drain after the drain has been installed
6. Attach drainpipe to BSP
nut (6) not shown.
Remove all excess putty around the drain after the drain has been installed
Loading...