MSI H61M-E23 User Manual

H61MU -E35/

H61M -E33/

H61M -E23/

H61M -P33 series

MS-7680 (v2.x) Mainboard

G52-76801XE

Preface

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNA - TIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

NVIDIA® is registered trademark of NVIDIA Corporation.

ATI® is registered trademark of ATI Technologies, Inc.

AMD® is registered trademarks of AMD Corporation.

Intel® is registered trademarks of Intel Corporation.

Windows® is registered trademarks of Microsoft Corporation.

AMI® is registered trademark of American Megatrends Inc.

Award® is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster® is registered trademark of Creative Technology Ltd.

Realtek® is registered trademark of Realtek Semiconductor Corporation.

JMicron® is registered trademark of JMicron Technology Corporation.

Netware® is a registered trademark of Novell, Inc.

Lucid® is trademarks of LucidLogix Technologies, Ltd.

Revision	History
Revision	Revision History	Date
V2.3	Add two models for PCB 2.X	January 2011

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

◙Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com/service/download

◙Contact our technical staff at: http://support.msi.com

ii

MS-7680

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable flat surface before setting it up.

The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that can cause damage or cause electrical shock.

If any of the following situations arises, get the equipment checked by service personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according to User’s Manual.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF), IT MAY DAMAGE THE EQUIPMENT..

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

:

使用者會被要求採取某些適當的對策。

For better environmental protection, waste batteries should be collected separately for recycling special disposal.

Preface

iii

Preface

FCC -B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7680

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1)this device may not cause harmful interference, and

2)this device must accept any interference received, including interference that may cause undesired operation.

iv

MS-7680

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must re-

mind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electron-

ic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment

will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektround Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

Preface

Preface

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

vi

MS-7680

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

Preface

vii

Preface

Contents

Copyright	Notice	ii
Trademarks		ii
Revision	History	ii
Technical	Support	ii
Safety Instructions		iii
FCC-B Radio Frequency Interference Statement		iv
WEEE (Waste Electrical and Electronic Equipment) Statement		v
Chapter 1 Getting Started		1-1

Mainboard Specifications 1-2

Mainboard Layout 1-4

Packing Checklist 1-5

Chapter 2 Hardware Setup 2-1

Quick Components Guide 2-2

Screw Holes 2-3

CPU (Central Processing Unit) 2-4

Memory 2-8

Power Supply 2-10

Back Panel 2-11

Connectors 2-13

Jumpers 2-19

Slots 2-20

Chapter 3 BIOS Setup 3-1

Entering Setup 3-2

The Menu Bar 3-4

Main Menu 3-5

Advanced 3-6

Overclocking 3-11

Mflash 3-16

Security 3-17

Boot 3-18

Save & Exit 3-19

viii

MS-7680

Appendix A Realtek Audio A-1

Installing the Realtek HD Audio Driver A-2

Software Configuration A-3

Hardware Default Setting A-5

Preface

ix

Chapter1

Getting Started

Thank you for choosing the H61MU -E35/ H61M -E33/ H61M -E23/ H61M -P33 Series(MS-7680v2.X)Micro-ATX mainboard. The H61MU -E35/ H61M -E33/ H61M -E23/ H61M -P33 Series mainboards are based on Intel® H61 chipsets for optimal system efficiency. Designed to fit the advanced Intel® LGA1155 processor, the H61MU -E35/ H61M -E33/ H61M -E23/ H61M -P33 Series deliver a high performance and professional desktop platform solution.

Getting Started

Mainboard Specifications

Processor Support

■Intel® Sandy Bridge processor in the LGA1155 package (For the latest information about CPU, please visit http://www.msi.com/service/cpu-support)

Chipset

■ Intel® H61 chipset

Memory Support

■2 DDR3 DIMMs support DDR3 1333/ 1066 DRAM (16GB Max)

■Supports Dual-Channel mode

(For more information on compatible components, please visit http://www.msi.com/service/test-report)

LAN

■ Supports LAN 10/100/1000 by Realtek® RTL8111E

Audio

■HD audio codec integrated by Realtek® ALC887

■Flexible 8-channel audio with jack sensing

SATA

■4 SATA 3Gb/s ports by Intel® H61 PCH (H61MU-E35/ H61M-E33/ H61M-E23)

■2 SATA 3Gb/s ports by Intel® H61 PCH (H61M-P33)

USB 3.0 (for H61MU -E35)

■ 2 USB 3.0 rear IO ports by NEC® uPD720200F1

Connectors

■Back panel

-1 PS/2 keyboard/ mouse combo port

-2 USB 3.0 ports (for H61MU-E35)

-4 USB 2.0 ports

-1 HDMI port* (H61MU-E35/ H61M-E33/ H61M-E23)

-1 VGA port*

-1 DVI-D port*

-1 LAN port

-6 flexible audio ports (H61MU-E35/ H61M-E33) / 3 flexible audio ports (H61M-E23/ H61M-P33)

*(The HDMI, DVI-D and VGA ports only work with Integrated Graphics Processor)

1-2

MS-7680

■On-Board

-3 USB 2.0 connectors (H61MU-E35/ H61M-E33/ H61M-E23)/ 1 USB 2.0 connector (H61M-P33)

-1 Chassis Intrusion connector

-1 S/PDIF-Out connector

-1 Front Panel Audio connector

-1 TPM Module connector (H61MU-E35/ H61M-E33/ H61M-E23)

-1 Parallel port connector

-1 Serial port connector

Slots

■1 PCIE x16 slot

■2 PCIE x1 slots

■1 PCI slot

Form Factor

■ Micro-ATX (24.5 cm X 21.5 cm)

Mounting

■ 6 mounting holes

1 Chapter

1-3

Getting Started

Mainboard Layout

Top : mouse/ keyboard

Bottom:USB ports

USB 3.0 ports		JPWR2
(optional)
	USB 3.0
HDMI port	Chip
	(optional)
(optional)

Top: VGA Port

Bottom: DVI-D

AN2SYSF

Top: LAN Jack

Bottom: USB ports

T:Line-In
M:Line-Out
B:Mic	LAN
	Chip
T:RS-Out (optional)
M:CS-Out (optional)		PCI _E1
B:SS-Out (optional)
		PCI _E2
		PCI _E3	BATT +
		PCI 1

Audio codec

JAUD1 JSP1 (optional)

JTPM1

CPUFAN

DIMM2

DIMM1

Intel

H61

JCI1

JUSB1

JUSB2

JUSB3

(optional) (optional)

JLPT1

JPWR1

	SYSFAN1
(Optional) SATA1 2
JBAT1	SATA5
SATA6
JFP2

JFP1 JCOM1

H61MU -E35/ H61M -E33/ H61M -E23/ H61M -P33 Series (MS-7680 v2.X) Micro-ATX Mainboard

1-4

MS-7680

Packing Checklist

MSI mainboard

MSI Driver/Utility DVD

SATA Cable

Back IO Shield

USB Bracket (Optional)

User’s Guide

1 Chapter

* The pictures are for reference only and may vary from the packing contents of the product you purchased.

If you need to purchase accessories and request the part numbers, you could search the product web page and find details on our web address below

http://www.msi.com/index.php

1-5

Chapter2

Hardware Setup

This chapter provides you with the information about hardware setup procedures. While performing the installation, be careful in holding the components and following the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly.

Use a grounded wrist strap before handling computer components. Static electricity may damage the components.

Hardware Setup

Quick Components Guide

SYSFAN2, p.2-14		CPUFAN, p.2-14
JPWR2, p.2-10	CPU, p.2-4		DDR3, p.2-8

BackPanel,	JLPT1, p.2-18
p.2-11
	JBAT1, p.2-19
	JPWR1, p.2-10

PCIE, p.2-20	SYSFAN1, p.2-14
	SATA, p.2-13
PCI, p.2-20
JAUD1, p.2-15	JCOM1, p.2-16
JSP1, p.2-16	JFP1, JFP2, p.2-14
JTPM1, p.2-17	JCI1, p.2-18
	JUSB1~3, p.2-15

2-2

MS-7680

Screw Holes

When you install the mainboard, you have to place the mainboard into the chassis in the correct direction. The locations of screws holes on the mainboard are shown as below.

2 Chapter

The side has to toward the rear, the position for

the I/O shield of the chassis.

Screw holes

Refer above picture to install standoffs in the appropriate locations on chassis and then screw through the mainboard screw holes into the standoffs.

Important

•To prevent damage to the mainboard, any contact between the mainboard circuit and chassis or unnecessary standoffs mounted on the chassis is prohibited.

•Please make sure there are no metal components placed on the mainboard or within the chassis that may cause short circuit of the mainboard.

2-3