Short instructions
CVA 620
a Hot water spout
b Coffee spouts, height-adjustable
c Handle to open appliance front
These short instructions are not a substitute for the Operating
Instruction booklet supplied with your coffee machine. Please
read the Operating Instruction booklet through before using for
the first time and take note of the Warning and Safety instructions
as well as the full descriptions on how to use your appliance.
d Control dial for steam
e Steam spout with milk frother
f Drip tray
(with container below to catch the
drips)
M.-Nr.
G
05 674 880
g Selector switch
h Display
i Coffee portion buttons
j Rinse and pre-warming button
k Hot water button
l Coffee bean container
m Slide control to select fineness of
ground coffee
n Slide control to select quantity of
ground coffee
o Water container
p Waste unit
q Brew unit
Making coffee
Preparation
Fill the water
^
container.
^ ... will appear in
the display.
Fill the coffee
^
bean container
with whole
espresso beans
only.
^ Pipework and
brew unit are
pre-warmed and
flushed through.
Select
^
"In Operation".
... followed by:
^
1 cup of coffee
2 cups of coffee
or
or
2x
2x
^
Press the required coffee portion
button once. See "Setting the
portion sizes" in your Instruction
Booklet.
^
Press the required coffee portion
button twice. See "Setting the
portion sizes" in your Instruction
booklet.
Cappuccino
Pre-heat the cup
^
with hot water.
^
Slowly turn the
dial anti-clock
wise.
Fill a stainless
^
steel jug one third
full with cold,
semi-skimmed
milk.
^ Move the jug in
circles until a
thick froth has
built up. Then
lower the spout
deeper into the
milk to heat it up.
Do not let the
-
milk boil!
Select steam and
^
as soon as steam
appears turn the
steam control dial
back to 0.
^
Turn the dial
back to 0.
Position the steam
^
spout in the jug
just below the sur
face of the milk.
^
Dispense a por
tion of espresso
coffee and add
the milk.
-
-
Hot water for tea
^
Press the hot water button to
dispense water. See "Setting the
portion sizes" in your Instruction
Booklet.
Important maintenance tips
N.B.: To ensure this appliance functions correctly, it is essential to maintain and
clean it as instructed in the operating instructions and in the video supplied with
your machine using the cleaning / descaling agents supplied with the machine *.
Failure to do so can result in poor quality coffee, bacterial contamination and in
extreme cases can lead to malfunction of the appliance.
Replacements are available to order through your Dealer or the Miele Spare Parts Dept.
*
Clean all parts by hand. Do not wash in a dishwasher.
Except: The metal grille from the drip tray.
Before use:
It is very important to programme the water hardness
^
level into the machine to prevent limescale building up
too quickly. See "Programming the appliance" section on
"Setting the water hardness".
Cleaning as required:
^
Read the "Clea
ning and care"
instructions in the
Operating In
struction Booklet!
Maintenance after each use:
-
^
Using a damp
cloth wipe away
any dry coffee
-
grounds.
^
Wipe and
replace the
steam nozzle,
then run the rins
ing programme.
^
Rinse and wash
all accessories.
-
^
Clean the brew
unit and steel
filters.
^
All pipework is
rinsed through
to remove
coffee grounds.
Wash and dry the following parts daily:
Rinse and dry the brew unit daily
^ Wipe the metal
filters clean.
^
Before pushing
the brew unit
back in press the
part marked
PRESS.
^
Do not press the
part marked
PRESS when
pushing it back
in.
When prompted follow the instructions in the display!
The waste unit is full
100 portions of coffee
^
can be dispensed
before you have to run
the descale
programme.
^
and must be emp
tied of coffee
grounds. Otherwise
it could overflow.
-
Degrease the brew unit after every 500 cups
^ When prompted the brew unit will
need degreasing using the cleaning
tablet supplied. Follow the instructions in your Operating Instruction
Booklet.
Lubricate the brew unit after every 500 cups
^
^
Lubricate all
moving parts.
Make sure the
brew unit is cor
rectly set up, as il
lustrated. If it is
not see "Problem
solving".
-
^
Lubricate joints
a, axle b, run
-
ners c, sealing
ring d.
^
Clean bolt a and
-
lubricate bolt a
and joints b.
When prompted run the Automatic descaling programme
(duration: 90 minutes)
Fill the water
^
container with
2 litres of water
and dissolve 2 of
the descaling
tablets supplied
in it.
Appears in the
display approx.
90 mins later.
Flush out all traces of descaling agent:
^
Empty out
containers and
place back under
the spouts.
^
Your machine is now descaled,
rinsed and ready to use again.
^
Let all the water
empty out of the
machine.
Loading...