Adjusting the door hinges ...........................................70
3
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances basic safety precautions should always be
followed, including the following:
Read all instructions before installation or use of the coffee system.
Proper use
Please read these instructions
carefully to prevent accidents and
machine damage.
This appliance complies with current
safety requirements. Improper use
of the appliance can cause personal
injury and material damage.
Read this safety information carefully
before operating the appliance.
They contain important information
on the safe installation, operation,
and care of your coffee system. To
avoid the risk of personal injury or
damage to the coffee system, it is
important that you carefully read the
instructions.
Keep them in a safe place and pass
them on to any future user.
This coffee system is for household
~
use only, for the preparation of coffee
beverages (espresso, cappuccino, latte
macchiato, etc.).
Do not use this machine other than for
its intended use. Any other use could
be hazardous.
Persons which lack physical,
~
sensory or mental abilities or
experience with the machine should not
use it without supervision or instruction
by a responsible person.
Children
Close supervision is necessary
~
when any appliance is used by or near
children. They could easily be scalded
or burned.
Never let children play with the
~
coffee system.
4
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Before installing the appliance,
~
check for externally visible damage.
Do not operate a damaged appliance.
Before connecting the appliance to
~
the electrical supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. If in doubt,
consult a qualified technician.
Be certain your appliance is
~
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
The appliance must be properly
~
installed before operation to ensure that
no electrical components are
accessible. Ensure that power is not
supplied to the appliance while
installation work, repairs or
maintenance is performed.
Do not use an extension cord to
~
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(danger of overheating and open
ground circuit).
If the appliance is installed behind a
~
door front, use the appliance only when
the door front is open. Do not close the
door front when the appliance is in
operation.
Before service or maintenance
~
disconnect the power supply by either
removing the fuse, "tripping" the circuit
breaker or unplugging the unit.
This appliance is not designed for
~
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
installation in these applications. Please
contact the Miele Technical Service
Department with specific requirements.
Installation work and repairs must
~
only be performed by a trained
technician in accordance with national
and local safety regulations. Repairs
and other work by unauthorized
persons could be dangerous and may
void the warranty.
While the appliance is under
~
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
void.
Defective components should be
~
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
Do not install or use outdoors even if
~
installed in the display cabinet.
To protect against fire, electric
~
shock and injury to persons do not
submerge the cord or plugs in water or
other liquids.
5
IMPORTANT SAFETY INSTRUCTIONS
Do not let the cord hang over the
~
edge of a table or counter, or touch hot
surfaces.
Do not operate any appliance with a
~
damaged cord or plug, or after the
appliance malfunctions or has been
damaged in any manner. Contact
Miele.
Always attach the cord to the
~
appliance first, then plug it into the wall
outlet. To disconnect, turn the machine
off, then remove the plug from the wall
outlet.
Never open the outer casing of the
~
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
may cause machine damage.
If installed in combination with
~
another appliance, a protective base
must be installed between the coffee
system and the appliance.
Install or locate this appliance only
~
in accordance with the provided
installation instructions.
Use
Caution! Do not look directly or with
an optical instrument into the
lighting - laser radiation.
Caution! Risk of burns when
dispensing hot beverages, they are
extremely hot.
Before the first use, flush the supply
~
lines for water and milk and thoroughly
clean the coffee system and
stainless-steel milk container.
Only fill the water tank with cold,
~
fresh tap water. Warm or hot water, or
any other liquids may damage the
machine. The water should be changed
daily to prevent bacteria or mold
growth.
Do not use deionized or mineral
~
water. They may lead to heavy calcium
built-up in the machine that can
damage the unit.
Do not put anything but coffee
~
beans into the beans container. Do not
put ground coffee in the beans
container, it will damage the grinding
unit.
Do not fill anything but ground
~
coffee or a cleaning tablet (for the brew
unit) in the funnel for ground coffee,
otherwise it will get damaged.
Only use plain milk. Flavored milk
~
products contain substances that can
clog the coffee system.
6
IMPORTANT SAFETY INSTRUCTIONS
Sugar can damage the appliance!
~
Caramelized or otherwise pre-treated
coffee beans or other sugar containing
beverages must not be put in the
machine.
Never place a cup with an
~
alcohol-coffee mixture underneath the
main dispenser. Plastic parts of the unit
could catch fire!
The hot water and steam dispensed
~
could cause scalding. These functions
must be used carefully. Never hold any
parts of the body under the steam
nozzle or the hot water dispenser. The
machine must never be used to clean
objects.
Never use a steam cleaner to clean
~
the appliance. Pressurized steam could
damage electrical components and
cause a short circuit.
Clean the coffee system daily to
~
prevent bacterial growth. All parts of
the coffee system are dishwasher-safe
except for the brew unit, bean
container, stainless-steel milk container
and lid, and main dispenser cover.
Failure to properly maintain machine
may cause health issues.
Be aware of how long milk in stored
~
in the milk container. If milk is not
continually cooled it can readily spoil
causing illness. Be sure the milk
container and pipework are properly
cleaned and maintained. See "Cleaning
and Care" for more information.
The appliance must be descaled
~
regularly with the supplied descaling
tablets. In areas with very hard water
the machine may need to be descaled
more often.
Only use the descaling tablets
~
provided by Miele. Take care to use the
correct mixture of water and descaler,
otherwise it may cause damage.
Depending on the oil content of the
~
coffee, the brew unit may clog. Clean
the brew unit every 200 cups with a
cleaning tablet. The display shows a
reminder message.
Dispose of the coffee waste in a
~
trash can, not in the sink. The sink
could get clogged.
Do not hang, lean, sit or place heavy
~
items on the door. The machine could
be damaged.
The use of accessory attachments
~
not recommended by the appliance
manufacturer may result in fire, electric
shock or injury to persons.
The appliance is designed for use
~
in room temperatures between 59°F
and 140°F (15°C and 60°C). Do not use
the appliance outside of this range of
temperatures.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
To avoid injuries allow the coffee
~
system to cool before cleaning or
putting on and taking off parts. Turn the
machine off at the main switch when
not in use and before cleaning.
7
Guide to the coffee system
Front view
a On/Off s touch control
b Display
c Left arrow <, to scroll through program options
d OK touch control, to confirm selected program options and save settings
e Right arrow >, to scroll through program options
f Hot water - touch control
g Door grip
h Hot water dispenser
i Lighting
j Drip tray
k Main dispenser, height-adjustable
l Stainless-steel milk container
8
Interior view
Guide to the coffee system
a Main switch
b Storage drawer
c Funnel for ground coffee
d Grind control slide
e Coffee bean container
f Drip tray with no-spill grid for transport
g Water tank
h Brew unit
i Waste unit
j Main dispenser connector (connects the brew unit to the main dispenser)
k Stainless-steel milk container
9
Guide to the coffee system
Included accessories
Stainless steel milk container
To hold and insulate milk, with
lid/handle and additional cover for
storing milk in the refrigerator (not
dishwasher-safe)
Cleaning containers
Large and small, for rinsing and
cleaning the milk pipework
Coffee spoon
Cleaning agent
For daily cleaning of the milk pipework
Cleaning tablets
To clean the brew unit
Descaling tablets
To descale the coffee system
Additional accessories are available.
Contact Miele or visit the Miele
website for more information
To measure ground coffee
10
First steps to use
Touch controls
Select a touch control with your
fingertip to use the machine.
Display
Espresso
q rHI J LnmC
The following symbols appear in the
main menu display:
qEspresso
rCoffee
HCappuccino
ILatte macchiato
JHot milk
LMilk froth
nUser profile for up to nine
different users
G Maintenance programs
Before the first use
The appliance must be correctly
installed and connected before the
first use. See the "Installation
Instructions" section of this manual.
Clean the appliance and remove
any protective film before the first
use. See "Cleaning and Care".
Turning on
Select On/Off s to turn the machine
^
on.
The first few times the machine is
turned on with the main switch, a
welcome screen will appear briefly on
the display, followed by additional
messages. The welcome screen is
displayed each time the machine is
turned on until 5 drinks have been
prepared:
C Settings: to customize
your coffee system
^
Use the arrow buttons to select a
program item from the display. Once
highlighted, confirm with OK.
Míele
Welcome
During the very first use, you will be
prompted to select a language.
^
Tap < or > until the desired language
appears in the display.
^
Confirm with OK.
The language is now set.
11
First steps to use
You will then be prompted to set the
Time format.
Tap < or > until the time format you
^
wish to select (12-hour or 24-hour) is
highlighted, confirm with OK.
Enter the Time of day: First set the
^
hours using < or >, confirm with OK.
Repeat to set the minutes.
Now specify when the time of day
^
should be displayed:
On: The time will be displayed even
–
when the machine is turned off.
– On for 60 seconds: The time will be
displayed for 60 seconds after
the machine has been turned off.
– Do not display: The display will go
dark as soon as the machine is
turned off.
^ Confirm with OK.
^ Select OK to confirm the message
indicating that your coffee system is
communication enabled.
If everything has been entered
correctly, Set up successful will
appear in the display.
Confirm the message with OK.
^
Turning off
Tap the On/Off button s to turn the
^
machine off.
If the automatic rinse feature is
enabled, the machine will start the
rinse cycle as soon as a coffee or
milk-based drink has been
dispensed. It will not shut off until
after the rinse cycle is complete.
12
Filling water, beans or ground coffee
Before using the coffee system for
the first time, clean the appliance.
See "Cleaning and Care".
Be sure to program the water
hardness (see "Settings - Water
hardness").
Filling the water tank
The beans and the water quality is
important for a good espresso or
coffee. The water tank must be washed
and filled with fresh cold drinking water
before each day of use. The unit
displays a reminder when turned on.
Never add hot water or any other
liquids except cold water to the
water tank.
Do not use mineral water. Mineral
water leads to heavy calcium
built-up in the machine that can
damage the unit.
Pull the water tank out.
^
Fill the container with fresh, cold tap
^
water to the "Max." mark.
The valve on the water tank ensures
that water cannot leak out.
^ Close the lid and push the water tank
into the unit until it clicks into place.
The water tank must be positioned
correctly or the valve will leak. If the
water tank has not clicked into
place, pull the tank out, check and
clean the niche.
^
Open the appliance door.
13
Filling water, beans or ground coffee
Filling the bean container
Only fill espresso or coffee beans in
the beans container. Anything else including ground coffee - will
damage the grinding unit.
Caramelized or otherwise
pre-treated beans or sugar
containing beverages must not be
filled into the appliance. It will
damage the coffee system.
Pull the bean container out.
^
^ Push the lid back and fill the
container with roasted coffee beans.
Filling ground coffee
A funnel for ground coffee is provided
in case you would like to prepare a
different coffee type, e.g. decaffeinated
coffee.
^ Pull the storage drawer out of the
appliance and lift the funnel lid, a.
^ Place one spoonful of ground coffee
into the funnel, b, (using the
supplied spoon) and close the lid.
^ Push the cover into the appliance
and close the door.
See "Preparing drinks - Espresso and
coffee made from ground coffee".
^
Push the lid back into place and put
the beans container back into the
appliance.
^
Close the door.
14
Clean the coffee system daily to
prevent bacterial growth. All parts of
the coffee system are
dishwasher-safe except for the brew
unit, bean container, stainless-steel
milk container and lid, and main
dispenser cover. Failure to properly
maintain machine may cause health
issues. See "Cleaning and Care".
The lines should be rinsed daily
before the first use. This will happen
automatically if the rinsing feature is
set to "On" (see "Settings - Rinse
Automatic") and the machine is cold.
After heating, hot water runs out of
the two spouts into the drip tray. If
the rinse feature was set to "Off",
select "Rinsing" to rinse the lines.
See "Cleaning and Care - Rinsing
the system".
Preparing drinks
Water will now flow from the main
dispenser and into the drip tray.
The machine will notify you when the
drip tray is full, but the tray should be
emptied daily.
The main menu then appears in the
display:
Espresso
q rHI J LnmC
Pre-warming cups
All beverages should be made in a
warm cup, to develop the aroma. The
smaller the amount of coffee or
espresso and the thicker the cups, the
more important it is to pre-warm the
cups.
^ Place an empty cup under the hot
water spout.
Turning on
^
Select On/Off s.
The following message appears in the
display:
Heating phase
If the automatic rinse feature is set to
"on" (factory default), the following
message is displayed after the heating
phase:
Rinsing
^ Select hot water -.
^
Hot water is dispensed. Select OK to
stop the flow.
^
Let the hot water sit for a moment to
pre-warm the cup, then empty the
cup and prepare the beverage.
15
Preparing drinks
Adjusting main dispenser
height
The height of the main dispenser can
be adjusted, to keep the shortest
distance to the cup and retain heat,
and maintain a better crema and froth.
^ Slowly pull the main dispenser up or
down as desired.
Coffee and espresso prepared
from coffee beans
Espresso, coffee, double espresso, and
double coffee are all prepared in the
same way:
Espresso
q rHI J LnmC
Use the arrow buttons to select the
^
desired beverage, confirm by
tapping OK once.
The machine grinds the beans and
pre-brews the coffee (if "On" is selected
under "Pre-brewing"). The selected
beverage is dispensed.
Do not open the appliance door
during the brewing process. The
appliance will be damaged.
Discard the very first two coffees
dispensed once you have started to
using the appliance, this will ensure
that any coffee residue from factory
testing is eliminated from the brew
unit.
^
Place a cup under the main
dispenser.
The beverage is dispensed through
both dispensers at the same time.
16
Preparing drinks
Double portion
If you would like a double portion of
coffee or espresso, or to prepare two
portions at the same time,
tap the OK button a second time,
^
while the display reads "2 portions?".
The two portions are always prepared
one after the other.
^ To fill two cups at the same time,
place one cup under each spout.
Be sure to wait for 2 dispensing
cycles to be completed before
removing the cups.
Coffee and espresso prepared
from ground coffee
After filling the funnel with ground
coffee (see "Filling water, beans or
ground coffee - Filling ground coffee"),
the display shows:
Make the coffee?
Yes
No
Tap < or > until "Yes" is highlighted.
^
Select "No" if no ground coffee is filled
in the funnel. Otherwise the coffee
system assumes that ground coffee is
in the machine and dispenses only
water the next time coffee is made.
The display reverts to the main menu,
and you can select the desired
beverage type.
Interrupting preparation
^
Tap OK when you see "Stop" in the
display.
Preparation will immediately stop.
17
Preparing drinks
Prepare beverages
Place a cup under the main spout.
^
Tap the OK button.
^
The appliance brews the espresso or
coffee, and the selected beverage is
dispensed from the main spout.
Do not open the appliance door
during the brewing process. The
appliance will be damaged.
After dispensing, the appliance
automatically reverts to bean
operation.
Interrupt preparation
^ During preparation, tap the OK
button when "Stop" appears in the
display.
Preparation will immediately stop.
If you use ground coffee, only one
serving is prepared at a time. The
appliance always uses the entire
portion of ground coffee loaded into
the funnel, for one beverage.
Beverages with milk
Stainless steel milk container
The stainless steel milk container is
vacuum insulated, to keep milk cold for
a period of time. With an ambient
temperature of about 68°F (20°C), milk
at 43°F (6°C) can be stored for 11-12
hours and remain under 55°F (13°C).
(Milk that is warmer than 55°F (13°C)
should not be used because it will not
make good milk froth.)
Milk cannot be stored as long if there is
a warming drawer underneath the
coffee machine.
Do not fill the container to the rim,
leave a gap of approx. 1"-1½"
(2 - 3 cm) from the top.
Make sure to keep the top and seals
of the container clean. Soiling can
cause affect the functioning of the
milk container.
Cold milk is best for creating froth.
18
Always pre-warm the cup with hot
water, before you prepare a beverage.
Preparing drinks
To prepare beverages with milk,
place the lid on the stainless steel
^
milk container and turn the lid to the
left, so that it clicks into place.
^ Open the appliance door and hang
the milk container in the appliance
(as shown).
^
Close the appliance door.
Cappuccino, latte macchiato, hot
milk, froth
Place a suitable cup or glass under
^
both dispensers.
For best results when preparing a
latte macchiato, place the glass
under the spout in such a way that
the espresso flows into the middle of
the froth.
Cappuccino
qr H IJLnmC
^ Tap the right arrow button until the
beverage symbol is highlighted, tap
OK once.
^ To interrupt preparation, tap OK
again.
To set the proportions for beverages
(coffee, espresso, froth, hot milk),
see "Setting serving sizes").
After preparing the first drink withmilk the reminder "Clean the milk
pipework" will appear in the display.
^
Tap OK to return to the main menu.
This reminder will not appear after each
additional drink.
19
Preparing drinks
User profile beverages
The user profile function is used to
prepare beverages to suit your taste,
by adjusting the amounts of water, milk,
and ground coffee, as well as
temperature and pre-brewing (see
"Creating a user profile").
If you have already created a user
profile, first select it then prepare the
beverage.
User profile
qrHI J L
^ Tap < or > until "User profile" is
highlighted, confirm with OK.
^ Tap < or > to select "Select", confirm
with OK.
^ Use < or > to select the desired user
profile, confirm with OK.
A large user profile n symbol will
appear in the display to show that a
profile has been selected.
n
mC
After use
Before turning the machine off, or at
the end of the day, flush the water
lines, the brew unit, the spouts and
the milk pipework in order to prevent
the machine from clogging (see
"Cleaning and care").
You can now operate the appliance
as you would for a "standard" profile.
20
Adjusting the coffee grinder
The finer the coffee beans are ground
determines the strength of the coffee
and the quality of the crema.
To prevent machine damage adjust
the coffee grinder one level at atime and let the beans grind before
adjusting another notch. Otherwise
the machine will be damaged.
The grinder should be adjusted:
If the espresso flows too quickly into
–
the cup, the pressure cannot be built
up because the beans have been
ground too coarsely. The grinder
should be adjusted to a finer setting.
– If the espresso only trickles into the
cup, the beans have been ground
too fine and the coffee will be bitter.
The grinder should be adjusted to a
coarser setting.
– If the crema is evenly colored but
pale, the ground coffee is too
coarse.
To adjust the grinder setting
Push the slide control to the left for a
^
finer grind or to the right for a coarser
grind.
You should be able to feel the notches
when moving the slide control.
If the slide control will not move:
^ Close the machine and dispense a
cup of coffee.
Then try to move the slide control
again.
–
If the crema is very dark brown on
one side, graduating almost to white
on the other, the ground coffee is too
fine.
21
Settings
The coffee system can be customized
to suit individual preferences.
Settings menu
Settings F
qrHI J Lnm
Tap < or > until Settings C is
^
highlighted. Confirm with OK.
Tap < or > until the desired option is
^
highlighted and confirm with OK.
The current setting(s) will be marked
with a check.
To return to the previous options in the
manu, select "Back A".
The possible setting options are
described in detail on the following
pages.
C
Language
You can select the language for all text
and messages displayed on your
machine.
Select "Settings F" and confirm with
^
OK.
Settings
Language F
Time of day
Tap OK.
^
Tap < or > until the language you
^
wish to select is highlighted.
^ Confirm with OK.
This setting is automatically saved, and
the display returns to the previous
screen.
All display text will now appear in the
language selected.
If you select the wrong language
accidently, follow the flag icon F to
find the "Language" option.
22
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.