How it Works
Medion
Loading...
MD 41610
user Manual
7 pgs240.44 Kb0

Medion MD 41610 user Manual

Download
TABLE OF CONTENTS
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cleaning and Maintanace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Jug Kettle MD 41610 1
T
ABLE OF CONTENTS
Jug Kettle MD 41610 2
SAFETY INSTRUCTIONS
About this manual
Please observe the following safety instructions carefully before putting the unit into operation. Take note of the warnings on the unit and in this manual.
Always keep the instruction manual near at hand. If you sell or pass on the product, make sure to include this manual together with the unit.
Base, plug and connection cable must not come in
contact with water or other liquids since this may cause electric shock
Therefore do not place the appliance near a wash
basin for example.
Place your appliance always on a stable and flat sur-
face. Attention should be paid that it cannot slip or tilt.
Never immerse the jug kettle in water or other li-
quids. Water must not reach the electrical parts from the bottom.
When disconnecting the main plug from the socket,
never pull at the connecting cable or unplug it with wet hands.
Disconnect the main plug from the socket when the
appliance is not in use, in case of malfunction, or prior to cleaning.
Always switch off the appliance before filling it with
water
Check, if the main voltage operates with the follo-
wing values: 230V ~ 50Hz
Never operate the appliance unattended!Children are unable to recognise the danger, which
may occur when electric appliances are improperly handled.
Therefore keep the appliance out of children's reach.Keep the appliance and the connection cable away
from heat sources such as hotplates or open gas fla­mes. These can cause them to melt.
During the operation the jug kettle is hot.
2
Touching rising steam may cause scalding!In order to avoid damages from steam turn the spout
away from furniture and walls.
Do not fill the jug kettle with less than 0.6 l and more
than 1.7 l.
The appliance may overheat, if the water level is too
low. Boiling water may splash, if the water level is too high.
Do not open the lid while the water is boiling.Use the jug kettle only with the proper base.Do not move the appliance and do not pull the main
cable when operating the appliance.
Do not operate the appliance if the jug kettle, the
base or the connection cable show visible damages.
The hotplate requires an extended cooling time. The-
refore premature touching may cause burns!
The appliance must not be treated with hard objects
or strong cleaning agents.
Even though the jug kettle is equipped with a run-
dry protection it must never be operated without wa­ter. Once the run-dry protection has switched off the appliance let the jug kettle cool down for at least 15 minutes before filling it again with water.
Do not modify the appliance in any way. Even the
connection cable must not be replaced by the user. Have only service shops or the Medion Service Cen­ter carry out repairs of electric appliances and their connection cables.
Improper repairs may be of considerable risk to the
user.
The appliance is designed for private use.When passing the appliance on to another person
also hand over the operating instructions.
S
AFETY INSTRUCTIONS
Jug Kettle MD 41610 3
OVER VIEW
4
USE
In order to remove manufacturing residues you should first - as described in the following - fill the appliance with water up to the maximum filling level, boil the wa­ter and pour it away.
` Open the lid by pushing on the bulg and fill in the re-
quired amount of water. Do not fill in less than 0.6 li­ters and no more than 1.7 liters (MAX). Close the lid.
` Plug the main plug in a socket with earthing contact. ` Place the jug kettle on the base. ` Press the ON switch. The indicator lamp indicates
the operation.
` When the water is boiling the appliance turns auto-
matically off shortly after and the indicator lamp goes off.
` Wait a moment until the water stops boiling. Take
the jug kettle from the base. Pour the water slowly to avoid splashing.
` Do not open the lid when pouring. A strainer insert
in the spout retains larger calcified pieces.Do not re­heat stale water. Pour it away.
IMPORTANT NOTES: Do not fill too much wa­ter in the jug kettle. Do not open the lid while the water is boiling or when pouring.
Jug Kettle MD 41610 5
CLEANING AND MAINTANACE
` Pull the main plug from the socket.Base and connec-
tion cable must not come in contact with moisture.
` Clean them only with a dry cloth.The outside of the
kettle can be wiped off with a moist cloth.
` In order to clean the strainer insert, pull the strainer
upwards on the handle.
` Rinse it under running, warm water. ` Insert the strainer by placing it on the appliance and
push it down with the handle until it clicks noticeably into place.
` Descale the kettle regularly, especially when calcifi-
cation of the heating element is visible, in order to
save energy and to ensure operational reliability. Out of consideration for the environment we recom­mend descaling with a mixture of vinegar or citric acid
with water in a 1:5 ratio, let it sit in the jug kettle for about one hour and then boil it. Afterwards rinse the jug kettle thoroughly with clean water.
SPECIFICATIONS
6
Model: MD 41610
Main voltage: 230V ~ 50Hz
Rated power: 2200 watts
Capacity: 0,6 -1,7 litres
Protection class: 1
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use