McIntosh RK-320 Owners manual

RK320 Rough-In Kit for the WS320

Installation Guide

The RK320 Rough-In Bracket is designed to facilitate the
installation of the McIntosh WS320 In-Wall Loudspeaker
System in new construction projects. The bracket provides a
solid metal mounting frame for extra support of the loud­speaker and assures the cut out is the proper size. When in­stalled vertically, the bracket will span 16 inch on center wall
studs. Refer to diagram below.

Note: Do not mount the flange opening closer than 1-1/4

inches from the stud to allow the clamping pieces to
swing freely for clamping the In-Wall Speaker
Assembly to the Rough-In Bracket and wallboard.

Installing the RK320 Rough-In Kit:

1. Use a level to assure correct placement of the bracket.

2. Place the bracket against the studs with the flange fac­ing outward.

3. Secure the bracket to the studs with 1 inch drywall
screws or 1 inch roofing nails (6 places).

McIntosh Part No. 040761

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: [phone] FAX: [phone]