|
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600 |
||
|
This Data Sheet Includes Information On |
|
|
|
Maytag |
|
|
• |
Product Model Number (s): |
• |
|
|
Food Waste Disposer: |
|
|
|
DFC3000AAX |
|
|
• |
Dimensions (Actual Size) |
• |
|
|
Overall height: 12 3/4" |
|
|
|
Largest unit circumference |
|
|
|
(not including plumbing): 7 3/16" |
|
|
|
Length of waste line pipe: 4" |
12 3/4" |
|
|
Distance from bottom of sink to |
6 11/16" |
|
|
centerline of disposer outlet: 6 11/16" |
||
|
|
||
|
Distance from centerline of disposal |
|
|
|
body to centerline of drain outlet: 5 3/4" |
|
|
|
Diameter of drain tube: 1 1/2" |
|
|
• |
Additional Information |
• |
|
• Electrical requirements: 120 volts, 60 Hz protected |
|||
by a GROUNDED 15 amp fuse or comparable circuit |
|
||
breaker. Individual branch circuit serving only this |
4" |
||
appliance is recommended. |
|||
|
|||
- Minimum wire size of 16 gauge (No. 14 preferred), |
|
||
copper wire only. |
|
||
- Must have a wall mounted ON-OFF switch located |
|
||
between the electrical power source and the disposer. |
|||
- Where local codes permit, use of a plug-in cord is |
1 1/2" |
||
acceptable. Maytag power cord, part 800112, is |
|
||
available. |
|
||
• Use 1 1/2" to 2" drain line. |
5 3/4" |
||
• 1 1/2" polypropylene drain elbow provided with |
|
||
disposer. |
|
||
• Center line of drain line must be lower than center line |
|||
of drain elbow on diposer. |
7 3/16" |
||
|
|
Side View (not to scale) |
|
Subject to change without notice. This system is designed to |
|
||
be updated daily if necessary. Dimension Express is not |
|
||
responsible for use of superseded, voided, or outdated data |
|
||
sheets. Because of the difficulty or impracticability of deter- |
|
||
mining actual damages, liability of Dimension Express shall |
|
||
not exceed $50.00. |
|
||
Copyright © Dimension Express, 2000. |
222 |
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN208 • A222 • 27754 • 002906 • 234747 • 43527 |
associated with reusing old Data Sheets. |