Maytag 2612990, MAV-15, 22003351 User Manual

0 (0)

OVERSIZED CAPACITY PLUS WASHER MAV-15

®

Have complete model and serial number identification of your washer. This is located on a data plate on the back left of the control panel. Record these numbers below for easy access.

Page 1

Pages 2-3

 

 

Model Number

 

 

 

––

––

–– –– –– –– ––

––

––

Pages 4-5

 

 

Serial Number

 

 

 

 

 

 

 

––

––

–– –– –– –– ––

––

––

 

 

 

Date of Purchase

 

&

Page 5

_______________________________

 

 

For additional questions, please contact us:

Maytag Appliances Sales Company 1-800-688-9900 USA 1-800-688-2002 CANADA 1-800-688-2080 USA TTY (for deaf, hearing impaired or speech impaired) Mon.–Fri., 8am–8pm Eastern Time Internet: http://www.maytag.com

NOTE: In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the appliance without revising this guide.

IMPORTANT: Keep this guide and the sales receipt in a safe place for future reference. Proof of original purchase date is needed for warranty service.

IMPORTANT: For service and warranty information, see page 7.

Page 5

Page 6

Page 7

Page 8

Page 16

A/02/02

Part No. 6 2612990

h t t p : / / w w w . m a y t a g . c o m

MCS No. 22003351

Litho U.S.A.

 

 

 

©2002 Maytag Appliances Sales Co.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, explosion, electric shock, property damage or injury to persons when using the appliance, follow basic precautions, including the following:

1.Read all instructions before using the appliance.

2.As with any equipment using electricity and having moving parts, there are potential hazards. To use this appliance safely, the operator should become familiar with the instructions for operation of the appliance and always exercise care when using it.

3.Do not install or store this appliance where it will be exposed to the weather.

4.Install and level washer on a floor that can support the weight.

5.This appliance must be properly grounded. Never plug the appliance cord into a receptacle which is not grounded adequately and in accordance with local and national codes. See installation instructions for grounding this appliance.

6.To avoid the possibility of fire or explosion:

a.Do not wash items that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode. Hand wash and line dry any items containing these substances.

Any material on which you have used a cleaning solvent, or which is saturated with flammable liquids or solids, should not be placed in the washer until all traces of these liq-

uids or solids and their fumes have been removed.

These items include acetone, denatured alcohol, gasoline, kerosene, some liquid household cleaners, some spot removers, turpentine, waxes and wax removers.

b.Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

c.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washerdryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

7.Do not reach into the appliance if the tub or agitator is moving.

8.Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when the appliance is used near children or pets.

9.Do not tamper with controls.

10.Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in published user-repair instructions that you understand and have the skills to carry out.

11.Unplug power supply cord before attempting to service your washer.

12.The agitator should not be removed. If the agitator is removed, it must be

replaced by pushing down completely and the locking screw tightened before the washer is operated.

13.Store laundry aids and other material in a cool, dry place where children cannot reach them.

14.Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

15.Do not use chlorine bleach and ammonia or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form.

16.Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in following loads and cause skin irritation.

17.Before the appliance is removed from service or discarded, remove the door to the washing compartment.

18.Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks and replace them every five years.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

1

CONTROLS AT A GLANCE

Control features vary by model.

Step 1 Select cycle

Press the control dial in and turn in either direction to the desired cycle. Pull the dial out to start the washer.

Note: All wash times are approximate.

COLORS is designed to clean colored items as well as dress shirts, dress pants, business casual and poly/cotton to reduce wrinkling.

HEAVY: 21 minutes of wash time. NORMAL: 15 minutes of wash time. LIGHT: 9 minutes of wash.

COLORS

HEAVY

PRESOAK provides a total of 33 minutes wash time. The first 12 minutes are periods of agitation and soak followed by 21 minutes of agitation. PRESOAK automatically advances through the wash cycle.

WHITES is designed to clean underwear, T-shirts and other cotton sturdy items like towels, sheets, jeans etc.

HEAVY: 24-27 minutes of wash time. NORMAL: 15 minutes of wash time. LIGHT: 9 minutes of wash time.

HEAVY

NOTE

c

.

Y

DELICATES is designed to clean items requiring a gentle wash action. This would include blouses and dress shirts. There will be 18 minutes of wash and soak cleaning action.

HANDWASH: Handwash is designed to clean nylons or lingerie. There will be 6 minutes of intermittent wash and soak cleaning action.

Step 2 Select water level

Move the slide lever up or down to the desired setting. If more water is needed once the fill is complete, move the lever up to reset and then to the proper setting.

LOAD SIZE

SUPER – 3/4 – Full

LARGE – 1/2 – 3/4 Full

MEDIUM – 1/3 – 1/2 Full

MINI – 1/4 Full

REMEMBER: Items must circulate freely for best results.

2

CONTROLS AT A GLANCE CONT.

Step 3 Select water temperature

Press the appropriate button to select the wash and rinse temperatures. Follow the garment care label for best results. Use the chart at the right as a guide.

REMEMBER: In wash water temperatures below 65° F, detergents do not dissolve well or clean well. Care labels define cold water as up to 85° F.

LOAD TYPE

HOT/COLD – White and heavily soiled, color-fast items

WARM/WARM – Delicate or colorfast items

WARM/COLD – Moderately soiled, colored items; most wrinkle free items

COLD/COLD – Brightly colored, lightly soiled items; washable woolens

Step 4 Select a customized cycle

Press the appropriate button(s) to select one or more options.

SUPER

CANCEL

USE

SUPER WASH – Can be used with any wash cycle to clean very heavily soiled items. Provides fast agitation and normal spin throughout all cycles.

GENTLE WASH – Can be used with any wash cycle to provide a normal agitation and slow spin. Use with delicate items including those labeled “Hand Wash.”

AUTO TEMPERATURE CONTROL

Assures a cold water wash of 75° F and warm water wash of 95° F. This option

assures detergent will dissolve and provide optimum cleaning results.

EXTRA RINSE – Provides an additional rinse at the end of the cycle to more completely remove laundry additives, suds, perfume, etc.

NORMAL RINSE – Cancels the second deep rinse. Provides only one deep rinse.

CANCEL – Press this button to cancel and reset any of the options.

If Auto Temperature Control is selected with a Warm/Warm, Warm/Cold, or Cold/Cold water temperature setting, the light will illuminate during the first fill.

MAV7650 Only – Auto Temperature Control is activated automatically when warm/warm, warm/cold, or cold/cold water temperatures are selected.

Step 5

Start washer

• Add load and close lid

 

 

• Add detergent and any additives

 

 

• Pull the control dial out to start

 

 

3

Maytag 2612990, MAV-15, 22003351 User Manual

OPERATING TIPS

Pour liquid chlorine bleach into bleach dispenser.

Chlorine bleach dispenser

The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load. To use, follow these steps:

1.Measure liquid chlorine bleach carefully, following the instructions on the bottle.

2.Add the bleach to the dispenser before adding the load. Avoid splashing or overfilling the dispenser. Wipe up spills.

Never pour undiluted liquid chlorine bleach directly onto the load or into the wash tub. It is a powerful chemical and can cause fabric damage, such as tearing or color loss, if not used properly.

If you prefer to use color-safe, nonchlorine bleach, pour it into the wash tub with your detergent. Do not pour non-chlorine bleaches into the bleach dispenser.

Pour liquid fabric softener into cup and dilute with warm water.

Fabric softener dispenser

This dispenser automatically releases liquid fabric softener at the proper time during the cycle. To use, follow these steps:

1.Pour liquid fabric softener into the dispenser using the amount recommended on the package.

2.Add warm water to the dispenser until it reaches the MAX line. Wipe up spills.

Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.

Never pour fabric softener directly on the load. It will leave spots and stains.

Use the dispenser for liquid fabric softeners only. Clean the area in and around the dispenser frequently with hot water, detergent and a soft brush.

Add detergent before the load.

Detergent

Use either liquid or granular laundry detergent. For best results, be sure detergent is added to the washer BEFORE the load and be sure wash water is above 65˚ F.

Use the correct amount of detergent for the load size, soil level and water conditions. Use more detergent if you have hard water and very soiled loads.

If you have soft water or a lightly soiled load, use less detergent. (See manufacturer’s instructions.)

Wipe up any detergent spills on the washer.

For detailed information on sorting, pretreating stains, etc., see the enclosed Laundering Tips booklet.

4

OPERATING TIPS CONT.

Loading

 

Put dry, unfolded clothes loosely in the

 

tub, up to the top row of holes for a max-

 

 

imum load.

 

Do not wrap large items like sheets

 

 

around the agitator.

 

• Mix large and small items for best circu-

 

lation. Wash bulky items like blankets

 

 

 

separately.

 

 

When laundering wrinkle free items or items of delicate construction, washable woolens or loosely knit items, never use less than the MEDIUM water level setting. This will minimize shrinkage, wrinkling and pulling of seams.

For best results, add the detergent to washtub before adding the load.

Close lid carefully to avoid slamming.

CARE AND CLEANING

Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to the washer and prevent the unlikely possibility of damage from escaping water.

Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.

Clean the following as recommended:

Control Panel – clean with a soft, damp cloth and glass cleaner. Do not use abrasive powders or cleaning pads.

Cabinet – clean with soap and water.

Interior – hard water deposits may be removed using a recommended hard water remover/cleaner labeled washer safe. Follow the cleaner manufacturer's directions for use, and make sure the washer is run through a complete cycle to rinse out any remaining cleaning substance.

STORING THE WASHER

Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare the washer for storage as follows:

Select NORMAL on the WHITES cycle and add one cup of bleach OR white vinegar to a full load of water without clothes. (Do not mix bleach and vinegar

in the same wash. Hazardous fumes can form.) Run the washer through a complete cycle.

Turn the water faucets off and disconnect the inlet hoses.

Disconnect the washer from the electrical supply and leave the washer lid open to let air circulate inside the tub.

If the washer has been stored in below – freezing temperatures, allow time for the washer to thaw out prior to use.

After storage, select NORMAL on the WHITES cycle and run the washer through a complete cycle.

5

BEFORE YOU CALL

For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundering Tips booklet.

CHECK THESE POINTS IF

YOUR WASHER...

ALWAYS CHECK FIRST

Plug cord into live electrical outlet.

Check fuse or reset circuit breaker.

WON’T FILL

Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

Turn both faucets on fully.

Straighten inlet hoses.

Disconnect hoses and clean screens. Hose filter screens may be plugged at the faucet.

WON’T AGITATE

Make sure the lid is completely closed.

Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.

Pauses are normal. Wait and see if the washer will start again.

WON’T SPIN OR DRAIN

Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.

Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.

If drain height is five to eight feet, a highvolume pump kit may be necessary. See installation instructions or call 1-800- 688-9900. If the drain height is over eight

feet, water may not be removed, even with the high volume pump kit.

LOAD IS WETTER THAN NORMAL AT THE END OF THE CYCLE

The washer is designed to reduce spin speed if an unbalanced load is

detected. This is normal.

• Redistribute the load in the tub and set the washer on SPIN.

STOPS

Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless lid is closed.

This may be a pause or soak period in the cycle. Wait briefly and it may start.

The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop fill operations for your safety. Call for service.

LEAKS WATER

Make sure water inlet hose connections are tight at faucet and water valve.

Make sure end of drain hose is correctly

inserted and secured to drain facility.

• Avoid extended soaking – soak for 30 minutes or less.

• Avoid overloading.

IS NOISY

• Be sure washer is leveled properly as outlined in installation manual.

Weak floors can cause vibration and walking.

Be sure rubber feet are installed on leveling legs.

A clicking sound may be the LoadSensor™ agitator (select models)

as it moves the load down through the cleaning zone for maximum cleaning effectiveness. This sound will vary from load to load. This is normal.

Operating sounds will vary depending on agitation speed.

FILLS WITH THE WRONG TEMPERATURE WATER

Turn both faucets on fully.

Make sure temperature selection is correct.

If Auto Temperature Control is selected, cold water may feel warmer than cold water from the tap (see page 3).

Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly. Flush water line before filling washer.

Check the water heater. It should be set to deliver a minimum 120°F (49°C) hot water at the tap. Also check water heater capacity and recovery rate.

Disconnect hoses and clean screens. Hose filter screens may be plugged.

CYCLE SELECTOR DIAL ADVANCES THROUGH “OFF”

• Extra Rinse is selected.

For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

6

MAYTAG WASHER WARRANTY

Full One Year Warranty

For one (1) year from the date of original retail purchase, any part which fails in normal home use will be repaired or replaced free of charge.

Limited Warranty

After the first year from date of original retail purchase, through the time periods listed below, the parts designated below which fail in normal home use will be repaired or replaced free of charge for the part itself, with the owner paying all other costs, including labor, mileage and transportation.

Second Year – All parts.

Third through Fifth Year – The drive motor. All parts of the solid state controls (if so equipped).

Third through Tenth Year – All parts of the transmission assembly.

Third through Lifetime – The inner wash basket.

Additional Limited Warranty Against RustThrough

Should an exterior cabinet, including the top, lid and baseframe, rust through during the one year period starting from the date of retail purchase, repair or replacement will be made free of charge. After the first and through the tenth year, repair or replacement will be made free of charge for the part itself, with the owner paying all other costs, including labor, mileage and transportation.

Please Note: This full warranty and the limited warranty apply when the washer is located in the United States or Canada. Washers located elsewhere are covered by the limited warranty only, including parts which fail during the first two years.

Canadian Residents

This warranty covers only those appliances installed in Canada that have been listed with the Canadian Standards Association unless the appliances are brought into Canada due to transfer of residence from the United States to Canada.

The specific warranties expressed above are the ONLY warranties provided by the manufacturer. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

To receive warranty service

To locate an authorized service company in your area contact the Maytag dealer from whom your appliance was purchased; or call Maytag Appliances Sales Company, Maytag Customer Assistance at the number listed below. Should you not receive satisfactory warranty service, please call or write:

Maytag Appliances Sales Company Attn: CAIR® Center

P.O. Box 2370

Cleveland, TN 37320-2370

U.S. 1-800-688-9900 Canada 1-800-688-2002 U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

When contacting Maytag Appliances Sales Company, Maytag Customer Assistance about a service problem, please include the following:

a.Your name, address and telephone number;

b.Model number and serial number (found on the back left of the control panel) of your appliance;

c.Name and address of your dealer and the date the appliance was purchased;

d.A clear description of the problem you are having.

e.Proof of purchase.

What is not covered by these warranties:

1.Conditions and damages resulting from any of the following:

a.Improper installation, delivery, or maintenance.

b.Any repair, modification, alteration or adjustment not authorized by the manufacturer or an authorized servicer.

c.Misuse, abuse, accidents, or unreasonable use.

d.Incorrect electric current, voltage or supply.

e.Improper setting of any control.

2.Warranties are void if the original serial numbers have been removed, altered, or cannot be readily determined.

3.Products purchased for commercial or industrial use.

4.The cost of service or service call to:

a.Correct installation errors.

b.Instruct the user on proper use of the product.

c.Transport the appliance to the servicer.

5.Consequential or incidental damages sustained by any person as a result of any breach of these warranties.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above exclusion may not apply.

User’s Guides, service manuals and parts catalogs are available from Maytag Appliances Sales Company, Maytag Customer Assistance.

7

MAYTAG • 403 W. 4th Street N. P.O. Box 39

Newton, Iowa 50208

 

Loading...
+ 16 hidden pages