www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
|
|
This Data Sheet Includes Information On |
|
|
|
|
Maytag |
|
|
• |
Product Model Number (s): |
• |
|
|
|
|
Washers: |
|
|
|
|
LAT9416AAE, LAT9416AAQ and LAT9416AAM |
|
|
• |
Dimensions (Actual Size) |
• |
|
|
|
|
Height: |
43 5/8" |
|
|
|
Depth : |
26 3/4" |
|
|
|
Width: |
25 1/2" |
|
|
|
Height from floor to top of open door: |
52" |
|
|
Height from floor to top of working surface: |
36" |
|
|
|
|
|
|
|
|
|
Rear recess: |
1 1/4" |
|
|
|
|
|
|
|
• |
Additional Information |
• |
|
•Electrical requirements: 120V, 60Hz, 15 ampere grounded, fused electrical supply is required. An individual branch (or separate circuit serving only this appliance is recommended). Equipped with 3 prong power cord.
•Maximum amperage draw is 6 amps (except for motor starting surges).
•Minimum wire size of 14 gauge (No. 12 preferred), copper wire only.
•When installed next to Maytag Dryer, the overall width is 54".
•Flush to wall installation possible.
•Water supply: 30 to 120 psi water pressure. 140°F hot water supply recommended. 5 foot length HOT and COLD fill hoses provided. Access for manual shut-off water faucets recommended. Suggested water line size is 3/8" or 1/2" O.D.
•Drain: Standpipe of 36" in height is recommended (48" maximum).Drain system must except 1 1/2" O.D. drain hose. Washer will discharge water at a rate of about 20 gals/min. 4 foot long drain hose supplied.
•Use of built in laundry wall box can simplify installation.
•Flooring requirements: Well braced solid floor (washer with load and water weighs approx. 450 lbs.
Installation on carpeting or soft tile requires kit 204986.
Subject to change without notice. This system is designed to |
|
be updated daily if necessary. Dimension Express is not |
|
responsible for use of superseded, voided, or outdated data |
|
sheets. Because of the difficulty or impracticability of deter- |
|
mining actual damages, liability of Dimension Express shall |
|
not exceed $50.00. |
|
Copyright © Dimension Express, 2000. |
391 |
Side View (not to scale)
52"
1 1/4"
36"
43 5/8"
26 3/4"
Top View (not to scale)
26 3/4"
25 1/2"
Rear view (looking into room when installed)
Plumbing locations on back of unit
(not to scale)
Drain |
25 1/2" |
Water |
|
|
intakes |
3 3/4" |
|
3 3/4" |
|
11 7/16" |
|
|
|
|
|
29 1/8" |
Dimensions may vary |
|
|
slightly depending on |
|
|
leveling legs. |
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN102 • A391 • 30626 • 000805 • 204146 • 67184 |
associated with reusing old Data Sheets. |
Loading...