PPM 808S
PPM808S
EightChannelStereoPoweredMixer
MIXER
The PPM™ Series mixers are comprised of three compact powered mixers, designed for portable live sound applications. Each powered mixer in the PPM Series has two graphic equalizers, built-in stereo digital effects with 16 presets, and two FR Series HighCurrent power amplifiers.
Like all Mackie mixers, the PPM Series mixers are designed for rugged, day-in and day-out road use. Their sturdy composite-molded case houses rugged, double-sided SMT-plated fiberglass circuit boards. Impact-resistant knobs are mounted so they “ride” just above the steel front panel.
The 808S has six mono mic/line input channels and two stereo mic/line input channels, with XLR mic inputs and 1/4" TRS line inputs. All mono channels have 1/4"TRS insert jacks (tip = send, ring = return). Each channel strip has one monitor and one internal/ external effects send, plus 3-band EQ, pan control, and input trim with individual level-set LEDs. A rotary volume control provides output gain for each channel.
The inputs include Mackie’s high-headroom, lownoise mic preamps. Trim controls provide 40 dB of microphone gain, 20 dB of line-level gain, and a full 20 dB of attenuation to “pad” hot signals. Each channel also includes a level-set LED for easy level setting.
Channel EQs are as follows: 12 kHz shelving high-fre- quency EQ (±15 dB), 2.5 kHz peaking mid-frequency EQ
(±12 dB), and 80 Hz shelving low-frequency EQ (±15 dB).
A global phantom power switch applies +15 Vdc to pins 2 and 3 of the XLR inputs, and a break switch mutes channels 1-6 while break music is playing. Left and right RCA tape inputs are provided with an adjacent input level control for connecting a tape deck or CD player.
PPM 808S
Features
Eight microphone/line inputs
Two stereo line inputs (on channels 7 and 8)
600 W main output power amplifier
600 W monitor output power amplifier
9-band graphic EQ on Main and Monitor outputs
EMACTM custom 32-bit precision digital stereo effects processor
Two auxiliary sends (EFX and MON)
3-band EQ on each channel
1/4" and XLR connectors on each input
1/4" Insert jacks on channels 1-6
Two 1/4" Speaker outputs per side
RCA stereo Tape In and Tape Out
Compressors (switchable) on both outputs
15 V phantom power Three-year warranty
Both the Monitor Master and Main Master rotary controls have corresponding EFX controls to mix the effects signal with the monitor and main outputs.
Eight LEDs indicate the output signal level for each main and monitor output. Outputs include a 1/4" TRS mixer line output, a 1/4" TRS monitor line output, and left and right RCA tape line outputs.
(continued on page 6)
Applications
Restaurants and Bars
Meeting Rooms
Churches/Sanctuaries
Outdoor Gatherings
Related Products
PPM 406M and PPM 808M |
1 OF 2 PAGES |
1 OF 6 PAGES |
|
|
MIXER
PPM 808S
PPM808S |
Powered Mixer |
PPM 808STechnicalSpecifications
Mixer Section
Frequency Response
MicInput to Main Mixer Output (Trim at 0 dB): +0, –1 dB, 32 Hz to 20 kHz
+0, –3 dB, 16 Hz to 80 kHz
MicInput to Power Amp Output @ rated power output: +0, –1 dB, 32 Hz to 20 kHz
+0, –3 dB, 16 Hz to 55 kHz
Distortion
THD and SMPTE IMD; 20 Hz to 20 kHz
MicInput to Main Mixer Output:
< 0.005% @ +4 dBu output
MicInput to Power Amp Output:
< 0.15%, 250 mW to rated power
Common Mode Rejection Ration (CMRR)
60 dB @ 1 kHz,Trim @ 0 dB
Noise
20 Hz to 20 kHz BW (150 Ω source impedance)
Equivalent Input Noise (EIN): |
–127 dBu |
Residual Output Noise: |
|
Main Mixer, Monitor, & Effects outputs |
|
Channel & Master levels off |
–95 dBu |
Main Mixer Output Noise:
Master @ nominal (–10 dB), all channels off –92 dBu Master & 1 input channel @ nominal
(–10 dB & –20 dB),Trim @ 0 dB |
–85 dBu |
|
|
Crosstalk |
|
Adjacent Inputs or Input to Output: |
–90 dB @ 1 kHz |
Fader Off |
–90 dB @ 1 kHz |
BreakSwitch Mute |
–80 dB @ 1 kHz |
Input Level Trim Control Range |
|
0 to –40 dB |
|
|
|
Phantom Power |
|
+15 Vdc |
|
Equalization |
|
Rumble Reduction: |
75 Hz, –18 dB/octave |
|
|
Channel EQ: |
|
High |
±15 dB @ 12 kHz |
Mid |
±12 dB @ 2.5 kHz |
Low |
±15 dB @ 80 Hz |
GraphicEQ (9 bands): |
|
Q = 1.414, ISO octave centers
±15 dB @ 63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 kHz
Main Mixer Section Rated Output
Main Mixer, Monitor, & Effects: |
+4 dBu |
|
|
Maximum Main MixerSection Output: |
+20 dBu |
Maximum Input Levels
MicInput: |
–20 dBu,Trim @ 0 dB (HI) |
|
+20 dBu,Trim @ 40 dB (LOW) |
Line Input: |
0 dBu,Trim @ 0 dB (HI) |
|
+40 dBu,Trim @ 40 dB (LOW) |
Insert Input: |
+20 dBu |
Stereo Line Input: |
+20 dBu |
Tape Input: |
+20 dBu |
Effects Return: |
+20 dBu |
Power Amp In: |
+22 dBu |
Input Sensitivity
Minimum Input Level to produce +4 dBu @ Main Mixer Output
MicInput: |
–68 dBu |
Insert Input: |
–28 dBu |
Line Input: |
–48 dBu |
Stereo Line Input: |
–28 dBu |
Tape Input: |
–18 dBu |
Effects Return: |
–18 dBu |
Maximum Voltage Gain |
|
MicInput to |
|
Insert Output: |
40 dB |
Tape Output: |
60 dB |
Main Mixer Output: |
72 dB |
Line Input to |
|
Insert Output: |
20 dB |
Tape Output: |
20 dB |
Main Mixer Output: |
52 dB |
Stereo Line Input to |
|
Tape Output: |
20 dB |
Main Mixer Output: |
32 dB |
Tape Input to |
|
Tape Output: |
10 dB |
Main Mixer Output: |
22 dB |
Effects Return to |
|
Main Mixer Output: |
22 dB |
Monitor Output: |
22 dB |
Input Impedance |
|
MicInput: |
3 kΩ, balanced |
Insert Input: |
10 kΩ, unbalanced |
Line Input: |
40 kΩ, balanced |
Stereo Line Input: |
10 kΩ, unbalanced |
Tape Input: |
10 kΩ, unbalanced |
Effect Return: |
10 kΩ, unbalanced |
Power Amp In: |
10 kΩ, unbalanced |
2 OF 6 PAGES