Logitech Z213 Setup guide

Logitech® Multimedia Speaker Z213
Setup Guide
Logitech Multimedia Speaker Z213
English. . . . . . . . . . . . . . . . . . 3
www.logitech.com/support/z213
2
Logitech Multimedia Speaker Z213
What’s in the box
2
3
1
Logitech® Important Information
Safety, Compliance and Warranty
2. Subwoofer
3. User documentation
3  English
Setup
Logitech Multimedia Speaker Z213
1 2 3 4
1. Plug the satellites cable into the subwoofer jack.
2. Plug the power cord into an electrical outlet.
3. Insert the 3.5mm plug from the wired remote into the audio jack on your device (computer, tablet, smartphone, etc).
4. Switch ON the ON/OFF button on the wired remote to turn the multimedia speaker Z213 ON.
4  English
Features
Logitech Multimedia Speaker Z213
Adjusting speaker volume
Adjust the Multimedia Speaker Z213 volume with the wheel located on the middle of the wired remote.
BASS
Adjusting bass controls
To adjust the bass level of your Multimedia Speaker Z213, turn the bass control clockwise located at the back of your subwoofer.
5  English
Using headphones
Most types of analog headphones with a 3.5mm connector can be plugged into the headphone jack at the front of the wired remote. When you plug in the headphones, the speaker is muted automatically. With headphones plugged into your Multimedia Speaker Z213, the main control volume is through your audio device (computer, tablet or smartphone). Headphone volume will not be aected by volume adjustment on the wired remote.
www.logitech.com
www.logitech.com/support/z213
© 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
621-000359.002
Loading...