Line 6, M13 Stompbox Modeler, M9 Stompbox Modeler,
M5 Stompbox Modeler, DL4, MM4, FM4, DM4, Vetta
and Echo Pro are trademarks of Line 6, Inc. All other
product names, trademarks, and artists’ names are
the property of their respective owners, which are in
no way associated or affiliated with Line 6. Product
names, images, and artists’ names are used solely to
identify the products whose tones and sounds were
studied during Line 6’s sound model development for
this product. The use of these products, trademarks,
images, and artists’ names does not imply any
cooperation or endorsement.
The effects in this gallery Feature a tonal heritage
of the past forty years of stompbox and effects
design. This gallery is a tribute and reference to the
careful study and design of the effects found in the
M13 Stompbox Modeler, M9 Stompbox Modeler,
M5 Stompbox Modeler, DL4, MM4, FM4, DM4
and Verbzilla.
As you get familiar with the models found inside
your product, please join us in thanking the
generous people that loaned their treasured artifacts
and antiques for our modeling analysis. We’ve done
our best to capture the special character of each of
these units in the models that power your effect
modeler.
In alphabetical order, the contributors to the
cause are: Tom Ayres, Tony Berg, Joey Brasler, Bill
DeLap, Eric Dover, Mike Drake, Dave Friedman,
Tim Godwin, Bob Hartry, His Intolerably Massive
Omnipotence (a.k.a. Mr. Huge), Jamie Kime, Albert
Molinaro, Angelo Mazzocco, Erik Norlander, Tim
Pierce, Nigel Redmon, Mike Reiter, Walter G. Rice
III, Marcus Ryle, James Santiago, Jeff Slingluff, Jack
Sonni, Art Thompson, George Van Wagner, Dave
Whiston, Lyle Workman, Zeke Zirngiebel, John
Ziegler – and, of course, the noise-tolerant upstairs
neighbors.
This publication is provided for your reference only
– see the Pilot’s Handbook of your Line 6 modeler
for details on operation, care & maintenance.
Away We Go....
Model Gallery
Delay Models
Featured in the M5/M9/M13 Stompbox Modelers & DL4 Delay Modeler
Tube Echo
Based on* Maestro® EP-1.
Some say the holy grail of delay.
Like PB&J...tubes and tape is
one great combination!
Multi Head
Based on* the Roland®
RE-101 Space Echo. This
model emulates the multiple
playback heads of the original
for that multi-tap delay effect.
Tube Echo DryThru
The same effect as the Tube
Echo only it does not color
your guitar’s dry signal. We let
the dry pass through.
Analog Echo
Based on* the Boss® DM2
Analog Delay. Treasured for
it’s warm, distorted delays only
a bucket brigade delay can
produce!
Tape Echo
Based on* the Maestro® EP-3
Echoplex. The EP-3 used
transistors instead of tubes for
the sound electronics.
Analog W/MOD
Here’s a model based on* the
Electro-Harmonix® Deluxe
Memory Man, which is an
analog delay with chorus.
Tape Echo DryThru
The same effect as the Tape
Echo only it does not color
your guitar’s dry signal. We let
the dry pass through.
Sweep Echo
Take the tone of the Tube Echo
and add a sweeping effect to
the repeats to give you unique
textures for adjusting the tone
of your delays.
Sweep Echo DryThru
The same effect as the Sweep
Echo only it does not color
your guitar’s dry signal. We let
the dry pass through.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied
during Line 6’s sound model development. Maestro® is a registered trademark of Gibson Guitar Corp. Roland® and Boss® are registered trademarks of Roland Corp. Electro-Harmonix® is a registered trademark of New Sensor Corp.
Lo Res Delay
Early digital delay units
generally had only 8 bit
resolution. Low bit resolution
can create a unique sort of
grunge and noise.
Digital Delay
This model is a straight up
digital delay with bass and
treble tone controls. Nothing
fancy here, just transparent
pristine echo-cho-cho-cho.
Digital Delay W/MOD
Choose this model to add a
chorus effect to your digital
delays.
Model Gallery
Stereo Delay
Here’s the secret to the “Big
L.A. Solo” sound of the ’80s.
Set one side as a fast echo with
many repeats, and the other
as a slow delay with just a few
repeats. Voilà, you’re famous!
Auto-Volume Echo
This model gives you two
effects in one. A volume fadein swell used for a bowing
effect. The other effect is an
echo, complete with tape-style
wow and flutter modulation.
Ping Pong
This effect has two separate
channels of delay, with the
output of each channel flowing
into the other, going back and
forth like a game of ping pong.
Echo Platter
Based on* the Binson EchoRec.
A staple for the likes of Pink
Floyd. Rather than using tape,
the EchoRec used a magnetic
platter to record and play back.
(This Model is actually not
available in DL4, but comes
from our Echo Pro rack unit.)
Reverse
!seltaeB eht dna xirdneH
imiJ ekil tsuJ — Take a step
back in time. Whatever you
play in comes back out at you
backwards, delayed by the time
you set (up to 2 seconds).
Echo Platter DryThru
The same effect as the Echo
Platter only it does not color
your guitar’s dry signal. We let
the dry pass through.
Dynamic Delay
Made popular by the T.C.
Electronic® 2290 Dynamic
Digital Delay. While you play,
the Dynamic Delay keeps the
volume of the echoes turned
down, so that the echoes don’t
overwhelm what you’re doing.
Note that you can duplicate
DL4’s Rhythmic Delay feature
by setting tap tempo to your
choice of note values—and you
get to do that with any Delay
Model!
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. T.C. Electronic® is a registered trademark of T.C. Electronic A/S Corp.
Model Gallery
Modulation Models
Featured in the M5/M9/M13 Stompbox Modelers & MM4 Modulation Modeler
Opto Tremolo
Based on* the optical tremolo
circuit that was used in the
blackface Fender® amps, like
the ’64 Deluxe Reverb®.
Dual Phaser
Based on* the Mu-Tron® BiPhase known for it’s big jet
sound.
Bias Tremolo
Based on* the 1960 Vox®
AC-15 Tremolo, which got its
pulse by literally varying the
bias of the power amp tubes.
Panned Phaser
Based on* the Ibanez® Flying
Pan. It’s a 4-stage phase shifter
with a panner built in.
Pattern Tremolo
Inspired by* Lightfoot Labs
Goatkeeper. This effect is what
you’d get if you could hook up a
vintage keyboard sequencer to
a tremolo.
Barberpole Phaser
A classic effect from the world
of modular synths. This phaser
either sounds like it’s always
going up or always down
depending on how you set it.
Set to stereo you get both!
Phaser
Inspired by* the MXR®
Phase 90. Our model features
additional parameters to take
you there and back again.
Script Phaser
Based on* MXR® Phase 90.
Just one knob, Speed, like the
original. Just add brown sound
and you’ll be “Talking’ Bout
Love”.
U-Vibe
Based on* the now-legendary
Uni-Vibe®, one listen to
“Machine Gun” and you’ll be
Analog Flanger
Inspired by* the classic MXR®
Flanger.
hooked on this effect model!
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Fender® and Deluxe Reverb® are registered trademarks of Fender Musical Instruments Corp. Vox® is a registered trademark of Vox R&D Limited. MXR® and Uni-Vibe® are registered trademarks of Dunlop Manufacturing,
Inc. Mu-Tron® is a registered trademark of Henry A. Zajac Jr. Ibanez® is a registered trademark of Hoshino, Inc. Roland® and Boss® are registered trademarks of Roland Corp.
Jet Flanger
Inspired by* the A/DA
Flanger. Compared to the
Analog Flanger, this model is
more dramatic, with a different
wave shape.
AC Flanger
Based on* the classic MXR®
Flanger. You’ve heard it on
Van Halen’s Fair Warning,
Women and Children First,
and “Unchained”.
Model Gallery
80A Flanger
Based on* the A/DA Flanger
with its signature jet-like
sweep. True to the original,
this model features same knob
functions as the classic.
Panner
This effect pans back and forth
between your left and right
channels. If you try and run it
in mono, it’s basically tremolo.
Analog Chorus
Based on* the Boss® CE-1
Chorus Ensemble, the original
stompbox chorus with big,
warm and groovy chorus tones.
Rotary Drum
Based on* the Fender®
Vibratone. This rotating
speaker effect was a popular hit
with SRV. Think “Cold Shot”.
Tri-Chorus
Based on* the Song Bird /
DyTronics Tri-Stereo Chorus.
You may have never seen one,
but you’ve heard it hundreds of
times.
Rotary Drum & Horn
Based on* the Leslie® 145, the
tube-driven rotating speaker
cabinet. It was made for the B3
but guitarists fell in love with
this shimmery effect.
Pitch Vibrato
Based on* the Boss® VB-2.
It contained a circuit that
produced bubbly vibrato, but
was popular for it’s “rise time”
control that when engaged,
sped up to where you last set it.
Dimension
Based on* the Roland®
Dimension D. One of the
first true stereo chorus units.
Relatively subtle in it’s nature,
it became an industry standard
for double-track effects.
Ring Modulator
Ring modulators are for those
special times when you want
different, weird, strange and
otherwise nontraditional guitar
sounds.
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Roland® and Boss® are registered trademarks of Roland Corp. Fender® is a registered trademarks of Fender Musical Instruments Corp. Leslie® is a registered trademark of Suzuki Musical Instrument Manufacturing Co. Ltd.
Frequency Shifter
A ring modulator gives you
both up and down shifted
frequencies. Here you can
select just the up or down
shifted frequencies.
Model Gallery
Distortion Models
Featured in the M5/M9/M13 Stompbox Modelers & DM4 Modulation Modeler
Tube Drive
Based on* the Chandler Tube
Driver®, delivering the sweet
singing sustain craved by
guitarists worldwide.
Heavy Distortion
Based on* Boss® Metal Zone,
the industry standard distortion
pedal for metal players since
1989.
Screamer
Based on* an Ibanez® Tube
Screamer®. In many blues
circles, you’re not allowed
to solo without one of these
medium-gain pedals!
Color Drive
Based on* the Colorsound®
Overdriver. Our model will
transport you instantly back to
that breeding ground of British
guitar heroes.
Overdrive
Based on* the DOD®
Overdrive/Preamp 250
designed to slam the input of
a tube guitar amp forcing the
amp to distort violently.
Buzz Saw
Based on* the Maestro® Fuzz
Tone. Take a deep breath and
repeat: “I can’t get no (duh,
duh, duh) Satisfaction.”
Classic Distortion
Based on* the ProCo Rat, an
angry and aggressive distortion
box that put teeth into a new
breed of metal in the late 70’s.
Facial Fuzz
Based on* the Arbiter Fuzz
Face, best known for its famous
association with guitar legends
Jimi Hendrix & Eric Johnson.
Jumbo Fuzz
Based on* the Vox® Tone
Bender. It can be heard all
over the first two Led Zeppelin
records, and is especially
apparent on “Communication
Breakdown.”
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Tube Driver® is a registered trademark of Butler Audio, Inc. Ibanez® is a registered trademark of Hoshino, Inc. Tube Screamer® is a registered trademark of Hoshino Gakki Co. Ltd. DOD® is a registered trademark of
DOD Electronics Corp. Roland® and Boss® are registered trademarks of Roland Corp. Colorsound® is a registered trademark of Sola Sound Limited Corp. Maestro® is a registered trademark of Gibson Guitar Corp. Vox® is a registered trademark of Vox R&D Limited.
Electro-Harmonix® and Big Muff Pi® are registered trademarks of New Sensor Corp.
Fuzz Pi
Based on* the ElectroHarmonix® Big Muff Pi®, this
is an American twist on the
distortion/fuzz pedal, known
more for its wicked sustain than
its buzz.
Jet Fuzz
Based on* the Roland® Jet
Phaser. It’s a fuzz. It’s a phaser.
Yeah baby! Time to grab
your 8-tracks of Uli Roth era
Scorpions.
Line 6 Drive
Inspired by* the Colorsound®
Tone Bender. If we could go
back to the 60’s and be a part
of the fuzz revolution... this is
what we’d design.
Model Gallery
Line 6 Distortion
Completely over the top.
Sure, it’s massive. Yes, it’s
over the top. Okay, it’s a lotta
crazy!!!
Boost Comp
Inspired by* a MXR® Micro
Amp. Our model delivers the
same “goose the input of the
amp” experience and serves up
a little secret sauce on the side.
Sub Octave Fuzz
Inspired by* the PAiA Roctave
Divider, this fuzz with an octave
below is just what you need to
give those Moog players a fit!
Try it on bass guitar—this is the
Octaver of Doom!
Volume Pedal Effect
We added this for those of you
that plan to use an expression
pedal, such as the Line 6 EX-1.
Awesome for faux pedal steel
and chords swells. Try it!
Bass Octaver
Inspired by* the EBS OctaBass.
This effect gives you a clean
octave down signal. It is very
popular in bass rigs but players
such as Jeff Beck have been
known to bust out this effect.
Red Comp
Based on* the MXR® Dyna
Comp, probably the most widely
used stompbox compressor.
Slide players such as Lowell
George loved it.
Octave Fuzz
Based on* the Tycobrahe®
Octavia, the classic fuzz+octave
effect. One pioneering user
of this type of effect was Jimi
Hendrix.
Blue Comp
Based on* the Boss® CS-1
Compression Sustainer with
the treble switch off.
Blue Comp Treb
Based on* the Boss® CS-1
Compression Sustainer with
the treble switch on.
Line 6 Vetta Comp
Taken from Line 6’s flagship
guitar amplifier – Vetta II.
With a fixed ratio of 2.35:1,
adjustable threshold and up to
12dB of gain available at the
Level knob.
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. EBS® is a registered trademark of EBS Holding HB. MXR® is a registered trademark of Dunlop Manufacturing, Inc. Boss® is a registered trademark of Roland Corp. LA-2A® is a trademark of William Putnam. Tycobrahe
is a registered trademark of Kurt Stier. Teletronix® and LA-2A® are registered trademarks of Universal Audio, Inc.
Line 6 Vetta Juice
A Line 6 original also created
for our flagship Vetta II guitar
amplifier, the ‘Juice’ in Vetta
Juice comes from the 30dB
of available gain in the Level
knob.
Tube Comp
Based on* the Teletronix®
LA-2A® studio compressor.
Considered one of the finest
compressors in many circles.
Model Gallery
Level (dB)
Level (dB)
Threshold
Gain Reduction
Shelf
0
Q
Frequency
Noise Gate
Use this to eliminate the hiss
from noisy pickups or the white
noise from extremely high gain
distortions by placing the noise
gate further in your signal path
chain.
4 Band Shift EQ
Four band graphic but the
shifter moves the lower band
even lower and the higher
bands even higher. Try shifter
above 50% for guitar and
below for bass guitar.
Graphic EQ
Inspired by* graphic eq pedals
such as the MXR® ten band
graphic equalizer which
became an integral part of the
live rig of Randy Rhoads.
HI
Pass
0
Frequency
Low
Pass
Mid Focus EQ
It’s a high pass and a low pass
both with frequency and gain
control used together to create
a band-pass. Also has a gain
boost to make up for level loss
in extreme band-passing.
Studio EQ
Inspired by* API® 550B.
Featuring a constant Q and
Soft Clipping output with level
control.
Parametric EQ
High shelf, low shelf, and a
fully parametric band.
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. API® is a registered trademark of Automated Processes, Inc. MXR® is a registered trademark of Dunlop Manufacturing, Inc.
Filter Models
Featured in the M5/M9/M13 Stompbox Modelers & FM4 Filter Modeler
Model Gallery
Tron Up
Inspired by* the Mu-Tron® III
envelope follower in the “Up”
position. Part auto-wah, part
triggered filter, it’s all about
wacky.
Voice Box
Inspired by* Vocoders, Vocal
Tracts & Surgical Tubing.
This model gives your guitar a
sound that’s typical of a classic
“talk box.”
Tron Down
Inspired by* the Mu-Tron®
III envelope follower in the
“Down” position.
+
V-Tron
Voice Box meets Mu-Tron®
III. In this model your guitar
again “speaks” with an almost
human voice, but now it does
so in response to your playing.
Seeker
Inspired by* the Z-Vex Seek
Wah. Imagine 8 “parked wah”
filters set at varying positions
and then sequenced through,
creating a pulsating hypnotic
vibe.
Throbber
Inspired by* the Electrix®
Filter Factory. It’s perfect for
cool Electronica sounds.
Obi-Wah
Based on* the Oberheim®
Voltage Controlled Sample and
Hold filter. Voltage Controlled
Filters create changes in
tone by emphasizing random
frequencies.
Spin Cycle
Inspired by Craig Anderton’s
Wah/Anti-Wah. This is what
headphone mixes were made
for! Imagine two wahs panned
left and right working opposite
directions from each other.
Comet Trails
After several days spent crafting
the code for our digital secret
sauce, we found ourselves one
afternoon surrounded by 10
empty cans of Dew, and sounds
from another world.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Mu-Tron® is a registered trademark of Henry A. Zajac Jr. Oberheim® is a registered trademark of Gibson Guitar Corp. Electrix® is a registered trademark of Electrix Pro, Inc.
Slow Filter
It’s Swell! This triggered filter
rolls off the high end of your
tone, with adjustable speed.
Your choice from dark to bright
(the UP mode), or bright to
dark (the DOWN mode).
Octisynth
Inspired by eight armed
denizens of the deep. Everyone
knows that all you need is a
bottleneck and a reverb tank
to get whale sounds, but how
about our friend the Octopus?
Synth-O-Matic
Inspired by a collection of
vintage analog synths. This
model features waveforms
captured from a mouth watering
collection of vintage synths.
Model Gallery
Attack Synth
Based on* the Korg® X911
Guitar Synth. Modeled after
one of the waveforms in the
X911, along with some of the
wave shaping functions that
are found on the original.
Vetta Wah
Taken from Line 6’s flagship
guitar amplifier – Vetta II. This
is our sound designers’ take on
a classic effect.
Synth String
Based on* the Roland® GR700
Guitar Synth. Your Filter
Modeler’s Synth String model
is based on one of the sounds of
the GR700.
Fassel
Based on* a Cry Baby® Super.
Coveted for the mojo of it’s
Fasel inductor.
Growler
R700 meets Mu-Tron® III.
Grrrrrrrrr!
Weeper
Based on* the Arbiter Cry
Baby®. Another variation
of the original wah with a
different inductor and other
component choices.
Q Filter
Your very own parked wah!
You’ve heard it before from
Mark Knopfler and from Brian
May of Queen—it’s a wah
“parked” in one position.
Chrome
Based on* a Vox® V847. A
successor to the original Clyde
McCoy wah. Clyde is a trumpet
player but guitarists everywhere
thank him for suggesting Vox®
create this effect.
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Mu-Tron® is a registered trademark of Henry A. Zajac Jr. Roland® is a registered trademark of Roland Corp. Cry Baby® is a registered trademark of Dunlop Manufacturing, Inc. Vox® is a registered trademark of Vox R&D
Ltd. Korg® is a registered trademark of Korg Inc.
Model Gallery
Chrome Custom
Based on* a modded Vox®
V847 that has the gain staging
on the first transistor stage
tweaked, and aftermarket
inductor, the Q widened, and
replaced with a 470k pot.
Smart Harmony
Inspired by* the Eventide®
H3000. This is a diatonic
harmonizer. If you ever wished
you had that second guitar
player for dual guitar parts, this
effect is for you.
Throaty
Based on* the RMC Real
McCoy 1. Geoffrey Teese
maticulously crafts the clones
of the original and rare Vox®
Clyd McCoy “Picture” wah.
Pitch Glide
Inspired by* Digitech
Whammy®. Dive bomb or ice
pick? This is how Tom Morello
gets a lot of those crazy sounds.
You’ll want an expression
pedal hooked up to enjoy this
properly.
Conductor
Based on* the Maestro®
Boomerang. According to
original advertising material,
this was not a ‘wah-wah’
pedal but a ‘wow-wow’ pedal.
Po-tay-to or Po-tah-to?
Colorful
Based on* the Colorsound®
Wah-fuzz. We only modeled
the wah section of course. This
pedal is different in that it was
an inductor-less design. It uses
a different circuit to get its
frequency resonance.
featured in the M5, M9 and M13 Stompbox Modeler only.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Vox® is a registered trademark of Vox R&D Limited. Maestro® is a registered trademark of Gibson Guitar Corp. Colorsound® is a registered trademark of Sola Sound Ltd. Eventide® is a registered trademark of Eventide, Inc.
Digitech Whammy® is a registered trademark of Harman International Industries, Inc.
Model Gallery
Reverb FX Models
Featured in the M5/M9/M13 Stompboxs Modeler & Verbzilla
‘63 Spring
Based on a 1963 brown spring
reverb head unit. Best known
for great surf guitar tone!
Chamber
An elongated ambient space
such as a hall, stairwell or
elevator shaft creates this
reverb type. Dreamy.
Spring
Based on a studio spring reverb.
A spring reverb’s characteristic
resonant sound was created
by springs suspended inside a
metal box. Sweet!
Hall
Simulates the sound of a
concert hall or large open
space with a strong reverb
tail. Imagine a gymnasium,
performance hall, or cathedral.
Plate
Based on a studio Plate reverb.
Similar to the spring, in its
metallic resonant quality. Plate
reverbs consisted of a thin
metal sheet suspended inside
a box.
Ducking
Built using a ‘Hall’ but with a
ducking effect. The volume
of your reverb is “ducked”
(reduced) while you’re playing,
and increases when you stop.
Room
Simulates the acoustic
properties of a classic echo
chamber , which was a room
used in early recording studios
for reverb effects.
Octo
Creates a lush, ambient space
with a harmonized decay
whose harmonic denseness is
controlled by the time knob.
Use volume swells and prepare
to float on cloud 9!
Cave
Surreal cavernous echo
chamber. I’m just a simple
caveman... Your world frightens
and confuses me... what more
can be said.
featured in the M5, M9 and M13 Stompbox Modeler only.
Tile
Emulates the acoustic
reflections of a tiled room, such
as a bathroom or shower, with
clearer/brighter discreet early
reflections.
Echo
Just like it says …echo…
echo…echo. This is a lush
echo with reverb.
Particle Verb
A Line 6 original that turns
your chords into a lush
modulated pad in stable mode.
Critical mode adds a slight rise
in pitch. All stops are removed
when in Hazard mode.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.