Pilot’s Handbook
Manuel de pilotage
Pilotenhandbuch
Pilotenhandboek
Manual del Piloto
取扱説明書
See www.line6.com/manuals for Advance Guide
40-00-0234 Advanced Users Guide available @ www.line6.com/manuals Rev E
®
G90 Wireless Receiver
Important Safety Instructions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
C AUTIO N
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CERTIFICATION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
Warning: Changes or modifications not expressly approved in writing by Line 6 may void the users authority to operate this equipment.
RF Exposure Statement: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
N222
You should read these Important Safety Instructions. Keep these instructions in a safe place
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• This apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
• WARNING: To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture.
• The appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Connect only to AC power outlets rated: 100/120V 220/240V 50/60Hz (depending on the voltage range of the included power supply).
• Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening.”
• Service is required when the apparatus has been damaged in any way, such as:
• power-supply cord or plug is damaged.
• liquid has been spilled or objects have fallen into the apparatus.
• the unit has been exposed to rain or moisture.
• the unit is dropped or the enclosure is damaged.
• the unit does not operate normally or changes in performance in a significant way.
1. Antenna A & B Input Connectors (BNC) - You can connect to either
your front (
C & D) or rear (A & B) BNC connectors. Choose what works
best for your rack.
S/PDIF
IN
OUT
TUNER/
AUX OUT
ANTENNA A
ANTENNA B
OUT
IN
AES/EBU
MAIN OUT
This device complies with part 15 of the FCC rules. O peration is subject to the follow ing
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Patent Pending Desigined in USA Made In China
SERIAL NUMBER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/AVIS:
SHOCK HAZARD – DO NOT OPEN. RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR. TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO
REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
90 - 250V
~
50 - 60Hz
10 W Max.
A OUT B OUTA OUT B OUT
OR
CABLE
TONE
CHANNEL
SELECT
RFBATTERYAUDIO
MUTE
TRANSMITTER
STATUS
EXIT
SELECT
9. Antenna A/D & B/C Output Connectors (BNC) - Use the connectors
to daisy chain multiple Relay G90 receivers. The outputs can be for
Antenna A & B or C & D. It is user selectable which antennas get routed
to the outputs. Be sure each additional receiver and its transmitter are
set to a different channel.
10. Tuner/Aux Out - Use this output to connect to an external tuner or
into a second audio path. The
Tuner/Aux Out continues operation even
when the
Main Out is muted.
11. Main Out - Use the 1/4 inch output when connecting to an amplifier
or effects pedals. Use the balanced XLR output when connecting to
studio grade equipment that supports balanced XLR connections such
as mixing consoles.
Basic OperatiOn
1. Antenna C & D Input Connectors (BNC) - For correct operation connect
the supplied detachable antenna by pressing on the BNC connector and
twisting clockwise for 1/2 turn.
Note: C & D Antenna inputs are not DC
Biased.
2. Transmitter Status Display
Audio - Green LEDs will light indicating the audio signal level.
Battery - All five battery LEDs will be lit to indicate full battery life.
The bottom LED will change to red once your battery life falls below two
hours and flash red when it falls below one hour.
RF - When transmitter is on and has the same channel set as the
receiver, these LEDs light green to indicate signal strength/quality: from
5 Green = Data excellent, interference low to 1 Green meaning Data
minimal, may have significant interference. When transmitter is off, or
set to a different channel than receiver these LEDs show as follows: No
LED = No data, no interference. 1 Red = No data, some interference up
to 5 Red = No data, high interference.
Mute - Lit LED indicates muted transmitter.
3. Channel Select - You must have the same channel selected on the
transmitter and receiver. Both ship from the factory set to channel 1, so
you’re all ready to go. To select a different channel:
• Press the
Channel Select, turn Edit knob to select a channel and
then press Edit (Push To Set) knob to commit the channel.
• Set the transmitter’s channel to match, as described in its Pilot’s
Handbook.
The Scan Channel feature checks all available channels for interference,
and recommends the best channels to use:
• Press
Channel Select button, then press the Select Button.
• The Display shows all 12 possible channels. The best channels are
highlighted, and if the transmitter is on there’s also indication of
which channel that’s currently set to.
• Turn the
Edit knob to select one of the channels that’s highlighted
as best to use, and select that same channel on the transmitter.
4. Cable Tone - Guitar cables have a natural electrical property called
capacitance. This means that longer cables roll off more high frequencies.
You can use Cable Tone to simulate the effects of different guitar cable
lengths and styles.
5. Display - The display will normally show the current channel you are
receiving as well as expected battery life and signal strength of your
antenna frequencies. The display also can show
Channel Select, Cable
Tone and Setup options.
6. Edit (Push To Set) Knob - Use this knob to adjust a currently selected
parameter in your display such as channel number or setup features. Push
the
Edit Knob in to commit any changes made when using it.
7. Setup Buttons - Press Select Button to see the list of Setup parameters.
Turn
Edit Knob to move through the list. To edit a parameter, press
Select Button turn Edit Knob, and press Edit Knob to lock that value in.
Press
Exit to leave Setup page.
8. Power Switch - Flip this switch to turn your G90 receiver on or off.
CABLE
TONE
CHANNEL
SELECT
RFBATTERYAUDIO
MUTE
TRANSMITTER
STATUS
EXIT
SELECT
A note about Antennas:
You must use at least one pair of antennas. Should extreme interference be
encountered, adding an additional pair of antennas will turn on antenna
diversity for enhanced performance.
Get advanced Guide and mOre Online at
www.line6.cOm/manuals
Get up to speed on your Relay G90 receiver’s deep editing features with
our Advanced User Guide available online. While you’re online be
sure to register your product or simply fill out and mail us your included
registration card. Registering gets you all set up for warranty service should
you have an issue with your product, and also qualifies you for contests,
special offers and more.
Loading...