®
RELAY G10TII / G10 / G10S
PILOT’S GUIDE
40-00-0569 - C |
www.line6.com/manuals © 2021 Yamaha Guitar Group, Inc. All rights reserved. |
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifiers: Line 6® Relay® G10TII, Line 6 Relay G10, Line 6 Relay G10R, Line 6 Relay G10S, Line 6 Relay G10SR
Responsible Party - U.S. Contact Information:
Yamaha Guitar Group, Inc. 26580 Agoura Road Calabasas, CA 91302-1921 (818) 575-3600 https://line6.com/
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: UOB-G10TII
IC: 6768A-G10TII
© 2021 Yamaha Guitar Group, Inc. All rights reserved.
Line 6, the Line 6 logo, and Relay are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.
System Overview
•Wirelessfreedominanysizevenue,home,oroffice
•Easy to use—no setup required
•Automatically chooses the best channel for true playing freedom
•Up to 7 hours of playing time per charge
•Optional manual channel selection for setups with multiple wireless units (Relay G10S and select RelayReady products)
•Best in class sound quality provided by:
•24-bit uncompressed digital transmission
•Best in class DAC and ADC provide super low noise transmission (better than 110dB dynamic range)
•Up to 50 feet (15 meters) for Relay G10, or up to 130 feet (40 meters) for Relay G10S, line-of-sight range
2.4GHz Wireless
Since the Line 6 Relay is a 2.4GHz wireless system, please avoid placing the receiver next to other RF transmitting equipment. We recommend that you install the G10 or G10S receiver at least 10 feet (3 meters) away from RF transmitters (e.g., WiFi routers).
The Relay system automatically selects the best channel when the transmitter is docked (for the G10S receiver, its Channel Selector needs to be set to AUTO).
After changing WiFi or other 2.4GHz wireless channels, please dock the transmitter in the receiver for at least 10 seconds.
What’s in the Box
RELAY G10TII
•Relay G10TII Transmitter
•Pilot's Guide and End User License Agreement
RELAY G10
•Relay G10TII Transmitter (not included in G10R Receiver Separate)
•Relay G10 Receiver
•USB-A to Micro USB-B cable
•Universal USB Power Supply (5V-1A) kit with international AC adapter kit (manufacturer: HonKwang Electric Co., Ltd. and model: HK-AP- 050AZZZ-CP [zzz=001 to 100] ). The provided AC adapter serves as the disconnect device
•Pilot's Guide and End User License Agreement
RELAY G10S
•Relay G10TII Transmitter (not included in G10SR Receiver Separate)
•Relay G10SR Receiver
2
•9V DC Power Supply (manufacturer: Shenzhen JingQuanHua & Everrise Intelligent Electric Co. Ltd. and model: NSA5Ex-090050)
•USB-A to Micro USB-B Cable
•Pilot's Guide and End User License Agreement
Please refer to the additional included safety documentation for power supply information.
(Direct current)
Getting Started
Using the Relay G10TII Transmitter with a Relay G10 or G10S Receiver
1.Insert the Relay G10TII transmitter all the way into the receiver dock to allow the battery to charge. A green steady LED on the transmitter indicates the transmitter is fully charged. A full charge takes approximately 3 hours.
2.While the G10TII is docked in the receiver, the system scans the environment and automatically selects the optimal wireless channel.
The G10S receiver's channel selector must be set to AUTO for this step.
Relay G10 |
Relay G10S |
3. Insert the G10TII transmitter into your instrument.
3